I've read that many people have been struggling to get the rear audio jack their Mac Pro to behave under bootcamp. The issue stems from the Realtek drivers 'Jack Detection' which normally allows windows to detect when you plug in headphones or speakers. On some Windows PC's the Realtek Audio Manager has the option to disable this detection, but the latest drivers don't include any advanced options.
View 2 Replies
My current speakers aren't built to utilize the rear audio jack on my Mac Pro, they only work with the front headphone jack. Anyone know if the Swan M-10s can run on the rear analog audio port?
View 4 Replies View RelatedI'm out of warranty. I looked behind and it looks difficult to reach in order to replace it. Is there a sound card that I can pop in one of the PCI slots?
View 8 Replies View RelatedI have speakers plugged into the rear audio output, and headphones plugged into the front. I was wondering if it were possible to have audio play from both simultaniously...
View 2 Replies View Related- Volume is at max
- System Prefs>Sound>External Speakers>Volume Max>Not Muted
- No red light coming from the headphone jack
- Tried inserting and removing headphones, no sound in speakers or headphones
- Restarted computer while holding down ⌘ + OPT + P + R , no sound made
- A very very faint feedback, like when you plug an electric guitar in to an amp, can be heard when the first sound (the mac start up chime) is supposed to play on restart
- USB headphones work
I have installed Windows 7 RC on my Mac Book pro. Everything seems to working fine but Red light in the Audio jack is always On. This happens only when i am using Windows. In Mac the Red light is off. I don't have any issues with sound. Does anyone know why it is on and how do I turn it off?
View 2 Replies View Related- On the current white Macbook, how can you choose whether the "user selectable" audio jack works as an audio-in or an audio out?
- If you get the right adaptor, could you use the audio-in and audio-out simultaneously?
- I presume the audio-out is stereo, not mono. But is the audio-in stereo or mono?
A few days ago I use a headphone do listen to music on my macbook pro but the headphone I was using was a bit old so the end of the pin it was a bit lager than the normal and now the other headphones I have (newer ones) stay too loose when plugged and disconnect very easily.Do you think it is possible to replace the audio out port without having to replace the hole motherboard? And do you think Apple would do that without charging me (I'm still covered by the warranty)?
Info:
MacBook Pro, Mac OS X (10.7.3)
i just got a macbook pro from my fiances sister as she broke the headphones off inside of it and just decided to buy another one.....so ive tried everything to get it out...crazy glue and every object imaginable tweazers you name it ive probably tried it....so my question is can i use a hot needle to poke through the backside of the audio out on the logic board? and if that wont work i want to completely disable the audio out jack and just use the speakers....(PLEASE NO POSTS ABOUT TAKING IT TO APPLE CARE THEY WANT $700 TO REPLACE THE LOGIC BOARD AND IM NOT DOING THAT...MAINLY JUST IDEAS ON HOW TO DISABLE THE AUDIO OUT....TRIED SYSTEM PREFS BY THE WAY....
View 2 Replies View RelatedMy mums macbook has gone crazy! There is no sound coming from the macbook, and when I went to check if the volume was up the volume box popped up as usual but with a symbol, similar to a no entry sign. Circle with a cross through it. Then I saw a bright red light from within the audio jack itself. When I plugged in ear phones it works fine but the built in speakers are not working.
View 19 Replies View RelatedI was using my 13" White Macbook (Spring 07) all day today, listening to music on headphones while working. I brought my computer over to a friend's house and attempting to line out some audio from Garage Band to speakers through the headphone jack and suddenly all audio began to have skips & spaces every second or so. I can still the hear songs but they are constantly interrupted. I tried Itunes & audio from the internet, and two different pairs of headphones I know work. Same problem every time. The strange thing is that the audio works perfectly out of the internal speakers. Has anyone had this same problem? I haven't seen anything on the web that was similar. I tried the Q-Tip/Toothpick trick suggested on a bunch of other threads. But I don't think it's an issue of the computer not adjusting to the headphone setting. Also tried to resetting the battery, but that didn't work either.
View 3 Replies View RelatedI use my front jack ALL the time. It stopped working from one second to the next. confirmed that it is NOT the headphones. checked preferences, seems ok.Â
Info:
Mac Pro (Mid 2010), Mac OS X (10.6.8)
transition from PC to Mac soon, but now I have my Creative 5.1 sound speaker system (with 3 lines of output, 1 for rears, front+center and the sub-woofer). The iMac only comes with a single optical audio output (Realtek HD?), I wonder if there is any hub-like device or so that allows me to fuse/connect physically the 3 lines in my 5.1 Creative system so that I will have a single line to transmit sound from my iMac to my set of speakers without compromising the 5.1 environment (6 speakers in full working working potential).
View 10 Replies View RelatedIs there an optical input on the 13" 2010 macbook pro? Or is it strictly output only?
View 3 Replies View Relatedi have an intel macbook running leopard with the most recent update. A problem arose a day before the update was installed wherein my macbook no longer transmits sound through the headphone jack. i have no reason to suspect a hardware failure, there has been no damage to the computer. is there any way this could (please, god) be a software failure? and if so, one that i can fix?
View 16 Replies View RelatedI have several speakers (Logitech) which I had hooked up to my PC with three cables, black, pink, green...the Mac Mini only has one plus for Audio...what do I do to get sound out of these speakers all at once?
View 6 Replies View RelatedI have a Macbook Pro and something happened to the audio jack recently. Not sure what but I have a 3 year old and pc husband at home. Basically the inside of the jack went from being an inny - where you can plug in an audio plug, to an outie - where you can only insert about half of your plug and it won't go in any further. When I go into Sound settings - Output it says the selected device has no controls, and the speaker icon on my status bar is greyed out. I brought it in and they said they would need to replace the logic board in order to fix the jack - $1,000.... yikes.
So long story short I am wondering if it is just the audio jack then could I buy usb speakers and use those instead? Any work around at all? I wish there were a way to just tell the computer to ignore anything the audio jack was telling it, but I was told that is not an option either.
Basically I dropped my macbook pro and ever since I have not been able to get any noise out of the speakers or the headphone jack and there's a constant red light in the headphone jack (I have tried the toothpick method).
View 3 Replies View Relatedaudio jack was showing red light when i was installing windows first time via boot camp ... !
Info:
MacBook Pro
I just bought the brand new macbook pro 13" lowest grade and do a lot of simple recording. My old macbook had both an audio in and out. one labeled headphones and one with the two triangles pointing toward the circle. It was expressed to me that this new one jack could support audio out and in as labeled by apples tech specs. I tried hooking up my synthesiser to the port yet garageband did not recognize an audio in port, nor did the computer.
View 6 Replies View RelatedI just picked up a new 1.83 core 2 duo at a price I couldn't pass up. I am going to use it as a HTPC so I have my hdmi cable, etc. All hooked up and ready to go. Last bit is the audio but I am having a bit of trouble. I bought a standard miniplug cable and assumed it would plug in just like my macbook. The problem is that the miniplug doesn't fit in the jack on the mini. I understand that the jack on the mini is a combo analog/optical jack but as you see below, it seems as though a standard miniplug y cable should work.
From the Apple support website:
The headphone / line output jack accommodates digital optical audio output, analog audio output with a 24-bit, 44.1-192 kHz D/A converter, digital audio output up to 24-bit stereo and 44.1-192 kHz sampling rate and supporting encoded digital audio output (AC3 and DTS). For analog headphone / line output a standard audio cable with 3.5mm metal plug should be used.
For digital audio, a standard toslink cable with a toslink mini-plug adapter can be used.I have done my research and some reading and can go out and buy an optical cable plus a miniplug/optical adapter but would rather go the analog route (I understand the quality difference) because I already have the cables and don't have a receiver or speakers, just my tv speakers.
Is there a way to play audio through the headphone jack and speakers simultaneously on my MacBook?
View 3 Replies View RelatedI feel like I once had a PrefPane for this problem but just am having a hard time searching for it. Currently I have my heaphones jack Line-In routed to my AV Receiver for iTunes music in my room, but whenever I am YouTubing or other stuff while listening to music the System Sounds come out of my Loudspeakers too. I am interested in routing only the iTunes audio through the headphone jack, and everything else to run through my iMac's internal speakers (2007 iMac AL).I saw the SoundFlower thing out there but didn't think that was the ticket
View 1 Replies View RelatedI am using a unibody MacBook (non-Pro). I have 2 issues, the first one is that whenever I plug in an audio device such as headphones or speakers while iTunes is playing, the song will freeze for about 30 seconds. The computer gets very laggy and iTunes freezes. Not even the media/volume buttons on the keyboard work. I am running Snow Leopard 10.6.3 and iTunes 9.1 (79). ALSO i have another problem I have been having since I got the MacBook I'm sure. I plug in a device into the standard headphone jack, and it just kind of sits there half plugged in (like not clicked in all the way). And so i have to push it to make it actually work, but here's the thing, if I'm listening to music in bed for example or on a slightly non-solid surface the headphones will just "pop out"! ... Like not literally but they will come out a slight bit and then the audio starts playing through the internal MacBook speakers. I'm pretty sure (but don't quote me on it) that Apple earphones do not pop out. If this is some sort of technique Apple is using to get me to buy their headphones then forget about it. I love to listen to music so I need my nice headphones. BTW the headphones I am using DO NOT "pop out" of any other audio device I own. In fact I can hang my iPod Touch from them without them coming out or loosing connection. Most audio devices I plug into the MacBook have the same problem, except the Apple branded iPod headphones as I mentioned earlier.
View 5 Replies View Relatedthere are 2 lines on headphones, it broke from the first line, so both lines are inside?
View 4 Replies View RelatedThis morning, the speakers on my MacBook Pro (Early '09) stopped working, but the machine transmits through the headphone jack just fine. I've done a PRAM reset, and that hasn't fixed it.
Info:
MacBook Pro (17-inch Early 2009), Mac OS X (10.6.8)
I recently got a receiver and surround sound speaker system. The quality of the audio from the CD player connected to it is far beyond the quality of the audio that comes from the MacBook pro via headphone jack to RCA connection. This was confirmed by burning a CD from the MacBook, placing it in the CD player then testing the two against each other - the same audio piece from the CD player or the MacBook, both connected to the same receiver/speaker set up. What other options might get better audio quality from the MacBook to the receiver?Â
Info:
MacBook Pro, Mac OS X (10.5.8)
No matter what headphone I use (Apple, Bose, Beats, AKG), the volume on the left side is weak and dying as compared to the right. Right side of any headphone works great. Macbook Pro 2011, came installed with Lion OSX, 13inch, i7.
Info:
MacBook Pro, Mac OS X (10.7.4)
i have recently bought a speedlink spes clip on microphone i plugged it into the 3.5mm jack on the side of my macbook air then i went into system preferences and clicked on sound. then output... but there wasn't anything showing where as if it was showing i would have been able to select my microphone output and not the actually macbook mic. but my new device plugged in isn't showing and i can't use it. i checked the packaging and it says system requirements mac.
View 7 Replies View RelatedI had a 3,5 mm stereo jack in my audio output on my macbook, and it broke inside. Is it possible to redirect the sound output to go through the input jack?
View 2 Replies View Related
