I have screwed up my permissions on 2 of my external drives,very important info on both.The disk icons have a small lock in the corner and I cannot read or write to them.Get info brings up a permissions window that says "Custom" where the read write should be.It will not let me change these.
View 3 Repliesi have an external western digital firewire/usb 2.0 drive that i use for backing up my stuff. i can read and write from it when its plugged into my PC but i can only READ when its plugged into my mac. how to change this so i can read and write when plugged into my powerbook?
View 3 Replies View RelatedI've been trying to do a simple task - but the mac won't have it.I want to change the icons on my flash drives, using Cmd-I, then copy and paste the icon (purchased from mac), but all that comes up on the drive is a 'png' file pic.
View 4 Replies View RelatedI was wondering if there was any software available that serves the same purpose as Shapeshifter, but for Snow Leopard.
View 1 Replies View RelatedI cannot apply custom icons. When I try, it applies a generic image file icon (rectangle, loop on picture, folded corner). Why?
Info:
MacBook Pro, Mac OS X (10.6.8)
I am already aware that Snow Leopard reports hard drive sizes in base 10 and not base 2.
I'm not here to argue about proper use of SI unit prefixes, the HD manufacturer marketing cabal that reports base 10 and not base 2 sizes on the box or the merits of gibibytes vs gigabytes or GiB vs GB.
I'm just asking for a way to change the size reporting back to base 2.
I haven't yet found a way to change it back here in the forums or on Google and only a few others have asked in other threads.
I figured that making a new thread would be helpful for people who just want a solution instead of arguing about base 10 vs base 2 and having to dig through other threads full of that.
I'd like to be able to view a folder's info and have the the lockpad remain unlocked. This is so I can change permissions much faster.I am not having the easiest time with the custom access panel, because I have to reopen it multiple times so be able to get the settings correct.For instance, I tried adding a user but it would not show up so I closed the Info window and reopened it. The user finally showed up, but then I had to `unlock` this to make further changes. This is when keeping it unlocked would make things easier for my privileges.
Info:
MacBook Air, Mac OS X (10.7.2)
On 10.6.2, I noticed that in the Get Info window, permissions for a file could be changed without having to "unlock" the operation with the administrator password. This was not the case in Leopard, which required the admin password before permissions could be changed through the Get Info window.
I found this to be concerning from a security standpoint. I had hoped that 10.6.3 would fix the issue, but it still appears to be a problem. I've noticed this on three different machines, two with clean installs of 10.6 and one with an upgrade from 10.5. Does anyone else notice this issue? Am I right in assuming that this is a security issue? The ability for permissions to be changed for any file directly from the Finder's Get Info window without even an admin password seems to be rather insecure to me.
I am trying to create a custom stationery templet and the content will not save.
View 1 Replies View RelatedAfter getting a replacement IMac and restoring all my files, applications, etc., from a Time Machine backup, I went to run a game I have which attempted to install a patch, but the patch would not apply, why, file permissions I'm sure. It looks like when Time Machine restored my computer it also restored my previous user account. I had to login as the restored user account to apply the patch. Now this brings up some questions.
My new user account is an admin, why wouldn't it be able to apply the patch. I logged into my old account to give my new account read/write permission on the game folder, but still couldn't apply the patch? Do I have to be the owner? Any good links about file permissions in Snow Leopard. I'm thinking I may have to re-install these apps to fix the permissions.
OK in Leopard I could always select a bunch of files, right click and get info, then change the permissions to Read and Write for Everyone and Leopard would apply it to all files selected. Now, when I try the same thing in Snow Leopard it actually opens the get info window for every individual file selected and I have to manually apply it to each one. Does anyone know how to go back to the old way?
View 2 Replies View RelatedI've noticed a quirk in SW. If one deletes an account (for example, the original Admin account) and answers that he would like to delete the home folder, more often than not, he is asked for the permission of an Admin account. However, if one doesn't enter the credentials and presses cancel, the account (and home folder) disappear anyway. Is this normal? Or is there data residue hiding somewhere.
Info:
MacBook Pro, Mac OS X (10.6.8)
When I upgraded to Snow Leopard, somehow my permissions have become affected and now when I log in as administrator, I am blocked from accessing folders that the administrator should be able to access. I think that my Administrator account details got deleted or changed to 'unknown' during the upgrade when I had to wipe my whole computer to load the new software. I now get the message: 'The folder “CrashReporter” can’t be opened because you don’t have permission to see its contents.' I can then go into 'Get Info' to change the permissions by adding my admin account (which is not there for some reason) and specifying 'read and write' and then it works fine. However, I have to do this individually for each and every folder and subfolder to make the files work properly. Is there a way of having the computer change all the access permissions to accept my admin name and password again? (So I don't have to change the permissions one at a time on each folder?)
Info:
iMac, Mac OS X (10.5.8), external HD has bootable old OS
I've SL 10.6 server with FTP service Everytime anyone creates new file or folder it gets new permissions!
How to get parent folder or file permissions for every new file or folder, without propagate permissions everytime manualy.
I would like to delete a load of disk permissions. They are continually needing to be repaired and I don't recognize any of the names of the apps, and if I do, I would prefer to uninstall them.
Is this crazy? The main reason is that I am using drive genius 3 which continually monitors the health of the drive using 'drive pulse'. It comes up with 'critical' repairs needed each day and they are the same ones so I would prefer to just ditch them if possible?
Also, what I would really like to know is how I can use the command line to 'batch' delete these suckers.
Info:
Intel Dual Quad Core Mac Pro, Mac OS X (10.6.6), 12 GB RAM, Motu 828 Audio interface FW 400, Logic Mackie Control
I have a group of designers that are connected to X Server running Snow Leopard. I have placed them in a group, "MarComm" I have granted everyone full read/write access. ( I can trust them all) I have tried to propagate these permissions..I saved the changes and restarted server. For some reason there are 2 sets of permissions.
1) full access (desired configuration)
2) "custom" access
This "custom" access does erratic things..for ex:
Allows the designer to pull off a job folder containing 12 items. He has permission to use 8 items, but not the remaining 4.
Perhaps I need a step by step tutorial on how to create a proper "group" and to propagate permissions. I understand that the ACL should take precedence over the POSIX. I am not well-versed in using the terminal, but I am a careful person, and willing to try it.
Info:
Xserve, Mac OS X (10.6.8)
I've found some possible solutions in other threads, but none worked. So here goes. I have an internal disk called "Maryam" I use for projects (not my startup/system disk). For some reason, when I send files from it to trash, I get this:
Here's how it looks in my Get Info: Here's how it looks from Sharing: None of my other disks have this problem. Why and what do I need to do?
Info:
MacPro (Early 2008), Mac OS X (10.6.8), 2 x 2.8 Ghz Quad Core, 8GB RAM, ATI Radeon HD 2600
I repaired my disk premmisons on my mac, but in the history it says, Warning:Suid File "System/Library/core....as been modified and will not be repaired
View 3 Replies View RelatedI have a snowleopard macbook pro and earlier I did what shouldn't be allowed a user to do. I modified the computer's permissions to read-only or write only. After I did that nothing opened. Apps or folders or files. So I reboot and It won't reboot either.The same thing happened to me about 2 years ago and I found a pretty much straightforward solution. Pressing command- or alt-something while booting and then just fixing the thing.I have tried to find a solution like that again on google and in here and mostly what I've found are solutions that involve re-installing the whole OS.
View 10 Replies View RelatedDisk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
file permissions - how to edit a user account that is creating files with permissions that are not wanted anymore. i understand how to reset permissions on files or folders, but i do not understand how to reset the permissions a user is "creating". ie, each time this user creates a file, the file needs to be manually edited for its permissions. so i need to edit the user's settings, but i can't find where to do that. this is a home office setup. we have two users with admin privileges. our imac is acting as a server of sorts - it holds common files that need to be edited by both users. the other user is typically working on shared files from a macbook over wifi.
Info:
iMac, Mac OS X (10.6.8)
we had an older xserve die on us recently, a g5 system running 10.5. we were able to recover most of the file content we needed off of the server, but not all of it (yet), and not any of the system files itself (the main drive was toast) the problem im having is this... we've been migrating this content over to a newer server running 10.6.8 server. Several of the files we need to get at and modify however were locked via the finder right before the original server went down (we do this to prevent others from editing a live file on the server). now, because the user data for these files was lost (terminal & finder show them as being owned by "unknown") we cannot change ownership of the files to unlock them.so basically, its a permissions loop that we cannot escape from: terminal will not let us chown or chmod the file, because its owner is unknown because the file is locked via finder, it will not let us change the owner.
View 6 Replies View RelatedAfter some various installations and file copy from/to external hard drives i ran the repair permissions on the bootup hard drive.
There was a listing about a mile long. Whoa, that does not look good to me.
So, i ran the persmissions repair again: another mile long listing: yikes.
Yep, ran another permissions repair and same thing.
How many times do you have to run permissions until it just show a few permissions that had to be corrected ? Or is this a sign that the system is in trouble.
This was an external FW drive with Leopard run by iMac 3.06GHz.
I have received warning from Disk Utility that I should repair permissions as several files show incorrect permissions and, more than that, my 750GB shows "769GB available".
1. If I use Command+R and rebuild the disk from a Time Machine backup, will permissions be reset or will the files just be copied as they are now?
2. Is there a way to verify the TM backups to check the files therein?
3. Suppose, just for the sake of an exercise, that I reload Snow Leopard; can I still use SL's Time Machine to read a Lion Time Machine backup?
Info:
MacBook Pro (17-inch Late 2011), Mac OS X (10.7.3)
I was just playing around with my external hard-drive - the "Ownership & Permissions" section of it's Info - and accidently changed it from "You may Read & Write" to "You have No Access" and while trying to change it back it somehow wouldn't work and then as I tried to open folders inside it, everything was missing inside the folders (presumedly not deleted since there was still 100GB of space used). So I restarted my computer as well as the hard-drive and now it won't even show up on the desktop. The odd thing is I still have it as an icon on my dock and when I click on it to open it, it just says "The application "(null)" cannot be launched. -5000". If you need to know, I have an iMac Version 10.4.11. Does anyone know what is wrong and what I should do to get it all back to normal?
View 7 Replies View RelatedI've been changing the permissions on some of my folders and files in my normal user account so they can be accessed and changed by another account. Problem is, I have a program that saves new files into a particular folder. When it saves the new file, the permissions are the default, meaning I have to change them myself in order to make them writeable by the new account. So my first question is - is there a way to make my first user account always save files with a set of permissions that I specify?
My next question is - what should these permissions be? Both of the accounts are admin accounts. Should I therefore set group to be 'admin' and give rwx permissions to the group? Or is it possible to set owner to 'admin'? Can a file be owned by a group? Looking forward to your answers! This UNIX stuff is fun!
Can anyone explain how to convert the default Adobe Acrobat File Icon to a custom Image?
I have created a PDF of a showreel (Text + Images) and want the user to see one of these images when they have the PDF Icon on their desktop etc.
PS: I'm running OSX 10.4.11 Tiger on a Powerbook G4. I use either Keynote or Powerpoint to create PDF's.
I don't know about you, but Snow Leopard's aurora is so much cooler. I used a program called "Desktop 2 Login" to change the default wallpaper for the login screen to a different wallpaper. Using this same program I changed it back to L's Aurora. (Still in 10.5). When I upgraded to snow leopard, the login wallpaper did not change. It is still stuck on L's aurora. I have used about every method besides Terminal, and it won't change.
View 3 Replies View RelatedOn the Get Info tab of my Applications folder I changed the permissions so that I have all the read and write rights of the whole folder. The it somehow changed to Name: system, and the Privilege: Read and Write. I didn't know that I was NEVER supposed to do that until I googled the issue. I googled a lot, and most of the solutions says that I need my mac DVD. I am currently in North Africa visiting my parents, and my Disks are back home. I tried many things, but the more I try, the more I seem to mess up my macbook. I have a macbook white with Mac OS X 10.5.8. Some suggest to go to Terminal, and use chown -R, but as soon as I open Terminal, i get the following:
-------
login: PAM Error (line 400): System error
login: Could not determine audit condition
[Process exited - exit code 1]
-------
I tried many suggestions, namely: "http://forums.macrumors.com/showthread.php?t=804099&highlight=application+folder+-permissions But I can't use Terminal.......................
Photoshop CS5:When trying to change a custom paper size, in the print set up, the application quits.I’ve repaired permissions and reset the application preferences.I don’t have this problem with CS4.
I'm using Yosemite OS 10.10, haven't been able to find where to update my profile.
