OS X V10.6 Snow Leopard :: Disk Utility Not Reporting Space Correctly?
Feb 27, 2012
I often add very large files to my system before compressing them, sending them to clients, and then deleting them. This process leaves me constantly thinking about how much disk space I have free. Disk Utility, and an Apple approved app called DaisyDisk (space visualization) typically help me accompish this. Sadly, as of this week I seem to have a problem. When I went and looked the other day Disk U was telling me that 250gb of my 320gb drive is in use. This seemed high to me, but to be safe I thought I'd delete some files I didn't need. After deleting a bunch of videos, and a backup of my Main Identity (19gb) from my system, I'd assumed I had freed up about 24gb, but when I went back into Disk U it was still showing the same 250gb in use. Yes I rebooted my system, and made sure the trash was empty.
As I investigated further I did a get info on all 6 folders on the MacHD and they added up to about 170gb. That seemed more realistic, so I did a get info on my MacHD and again it showed the same thing 170 in use and 148.something available. Note: I have no partitions on this drive. But yet, still when I go to Disk U it seemed to be stuck at only 64gb free. Today when I went and looked again I am still seeing the same amount in use and free on the MacHD get info, but on Disk U now I am seeing 108 free and 211 in use. Why the difference? I would think Get Info was pulling from the same place as the mac disk utility.
Info:
MacBook Pro 15", Mac OS X (10.4.7)
View 11 Replies
ADVERTISEMENT
Jun 23, 2012
My MBP has been reporting issues over the last few days and recommending that I verify the disk. Whenever I do this, it says that it finds errors and I should reboot with comamnd-r pressed and choose disk utility. Which I do. However when I try to verify the disk or repair the disk in this mode, it never finds any issues? Logging back in and running disk utility will again report issues and recommend repairing What should I do?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 6 Replies
View Related
Oct 14, 2010
The last couple of days safari has been crashing pretty frequently for me. I've been using chrome no problem, but i do prefer safari, so I just googled it and got pointed to Repair Permissions in Disk Utility.
So I just opened Disk Utility, which I'm fairly sure I've never used before, and it's saying, under my HD "this drive has reported a fatal hardware error to Disk Utility. If the drive has not failed completely, back up as much data as you can and then replace it with a working drive."
It's saying it for both "FUJITSU MHZ2250BH FFS G1 Media" (I'm not even sure what that is) and "Macintosh HD".
There's nothing wrong with my computer? I've googled around and apparently this means my machines about to die?
View 5 Replies
View Related
Aug 26, 2009
I partitioned my disk using Terminal's diskutil. I decided i didnt need the partition anymore, so i deleted it (using Disk Utility.app) and added the free space to my mac partition. Basically, Finder and Terminal dont show the free space added back, and Disk Utility shows the space added back to the disk. I tried restarting, repairing disk (which coincidentally had an unrelated problem), repairing permissions, but the problem is still happening
View 3 Replies
View Related
Dec 15, 2010
I'm having a pretty serious problem. I attempted to erase the free space on my HD, as I do from time to time, except this time it appeared to hang/freeze at the end, when it gets to the part where it creates a temporary file. I waited for several minutes and it didn't move. I tried clicking the skip button, but that did nothing either, so I force quit Disk Utility.
The problem is, it left the disk at "Zero KB" of free space, effectively making my computer inoperable. I was in the process of studying for a huge exam tomorrow, and am currently flipping out.
If it matters, I'm on a Macbook Pro 2.33 GHz Core 2 Duo, running 10.4.
I really don't want to have to reinstall the OS and import the old files, but my real fear is that I will have to do a fresh install of the OS.
View 24 Replies
View Related
Dec 15, 2010
I'm having a pretty serious problem. I attempted to erase the free space on my HD, as I do from time to time, except this time it appeared to hang/freeze at the end, when it gets to the part where it creates a temporary file. I waited for several minutes and it didn't move. I tried clicking the skip button, but that did nothing either, so I force quit Disk Utility.
The problem is, it left the disk at "Zero KB" of free space, effectively making my computer inoperable. I was in the process of studying for a huge exam tomorrow, and am currently flipping out. Any help would be greatly appreciated.
If it matters, I'm on a Macbook Pro 2.33 GHz Core 2 Duo, running 10.4.
I really don't want to have to reinstall the OS and import the old files, but my real fear is that I will have to do a fresh install of the OS.
View 7 Replies
View Related
May 14, 2012
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
View 6 Replies
View Related
May 15, 2012
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies
View Related
Jun 12, 2012
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 8, 2012
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
View 2 Replies
View Related
Apr 2, 2012
My HDD died recently and I cannot get booted into OS X. It just hangs on the grey screen with the apple. I am (was) running 10.6.8
I am having a lot of trouble trying to boot from my install DVD. First of all I purchased a new HDD which came with Lion pre-installed on it. This worked fine, except when I tried to restore my latest time machine back up it used up 200GB of my disk space but nothing is restored? No doucments or music anywhere, photos, nothing. There is no change at all except half my storage has disappeared. I had posted another question on here and the reply said to use setup assistant, which I could not locate in Lion?I then tried to install Snow Leopard back over Lion but it would not let me. I tried to boot to the install disk but it just hung at the apple screen again.
I gave up and bought another brand new HDD but it won't recognise it on boot up. I just get a flashing folder with a ? in it. I tried to boot into the install DVD and again it wouldn't do it.
I then went back to my original HDD, and tried to boot to the install DVD from that (I hadn't tried this first off as my install disk was elsewhere and I purchased the Lion HDD as a stop gap measure) and it STILL wouldn't do it? This is now the original disk with the original install DVD (10.6) issued with my macbook pro when I purchased it and it will not boot to the DVD. Why why why?! It is almost enough to make me bin the lot and switch to windows.
Info:MacBookPro, Mac OS X (10.6.8)
View 8 Replies
View Related
May 30, 2012
My Macbook (late 2008 aluminum unibody running Snow Leopard 10.6.8) is having a plethora of problems - Spotlight won't return any results, I can't get any .dmg files to mount, and software updates can't be installed. Many of the solutions I've found involve running Disk Utility, but every time I try to open it, it crashes.
Here's the log file I get:
Process:Disk Utility [52987]
Path:/Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk
UtilityIdentifier: com.apple.
DiskUtilityVersion: 11.5.2 (298.4)
Build Info: DiskUtility-2980400~60
Code Type: X86-64 (Native)
[Lig] .....
Info:
Macbook 5.1, Mac OS X (10.6.2)
View 1 Replies
View Related
Mar 27, 2012
I have used Disk Utility to attempt to password protect a folder but its not working for me. I go to FILE>NEW>DISK IMAGE FROM FOLDER I then highlight the folder I want to password protect and click the IMAGE button.In the window that pops up, I then select 128 bit encryption and leave image format on COMPRESSED.Then I enter and verify the password I want to place on the folder and hit OK.The resulting disk image appears to have been modified, but when I double click on the supposedly password secured folder, nothing happens. The folder doesn't open, nor does a window pop up asking for a password.I'm running snow leopard.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.53Ghz Core Duo 500 GB HD
View 1 Replies
View Related
Apr 8, 2012
I've got an external har drive that i've been using for the last 6 months as my time machine back-up. I've used the disk utility in the past to create an image and password protect my drive that way. But.is there a way i can use the same process for a drive that already has content on it? Can i password protect my drive using the disk utility which will password any current content as well as any future content?
ps - im using 10.7.3
Info:
Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 14, 2012
I want to run Disk utilities on my mac. Have done this before using system disk and holding C etc.Since upgrading to Snow Leopard from Leopard it no longer sees my system disk.Restart holding down C with system disk installed...and mac just boots-up normally!Ultimately I want to run the disk utility to check that the Hard Drive is healthy after install.
Info:
PowerMac, Mac OS X (10.6.8), 2x3 Ghz Dual-Core Intel Xeon
View 3 Replies
View Related
Jun 16, 2012
on doing a disk utilities scan it came up with this - "Problems were encountered during repair of the partition map" why won't it let me repair this problem?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
Feb 10, 2012
I bought Snow Leopard recently and attempted to install it yesterday. Mid-way through installation it cancelled due to "Unchangeable Disk Space." It gave me the option to restart and re-install, which I attempted, to the same error. I tried once more to no avail. At this point I attempted to restart using the old operating system (Leopard). When I did so the computer restarted. It stayed on the initial grey boot up screen (with the mac logo and the spinning circle thing underneath) for about 3 minutes before shutting down. This occurs every time I boot the computer back up.I am using a Macbook purchased November 2008 which was running Mac OS X Leopard 10.5.8.
Info:
MacBook, Mac OS X (10.6.3)
View 2 Replies
View Related
Feb 11, 2012
I'm using a MacBook Pro (March 2011) running 10.6.8.
I just deleted (technically backed up to an external raid and then deleted from the system disk) about 8gb worth of files.
However, in Finder and in Disk Utility, it shows 1.96GB available. That number is up a little and for awhile at least, was growing.
I'm also experiencing this same problem on an external USB drive. I deleted about 3 gb worth of files, but the available disk space hasn't increased.
I'm coming from the PC world, where, if you delete a bunch of stuff, the free disk space magically increases to show the correct amount.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 6 Replies
View Related
Sep 4, 2009
I recently replaced Leopard 10.5 with a clean installation (not an upgrade) of Snow Leopard 10A432 (SL) on my Intel Core 2 Duo MacBook (aluminum, 2GB RAM). Under Leopard 10.5 I was able to use Disk Utility (DU) to dynamically re-size existing volumes on USB hard drives. But under SL I am unable to do so. While I am able to replace all existing partitions on a USB drive with a new set of partitions and resize them prior to their creation by dragging the slider bars, once created, DU will not let me dynamically resize the new partitions. Doing so was easy with DU under 10.5. For example, after I re-partitioned a USB drive with DU under SL and created 2 partitions, I was able to make the top partition smaller by dragging the bottom edge upward from the lower right corner, but there seems to be no way (and no slider bars) to adjust the size of the lower partition to use the space freed by having made the upper partition smaller. In fact, although the upper partition reports a smaller size, when clicked on, the border around the upper partition still includes the range defined by its initial, larger size. There also seems to be now way (no slider bars) at the top edge of partitions that would allow them to be expanded/contracted from the top down. Has anyone else encountered these issues? Any thoughts/suggestions as to how to resolve them? Are these known issues? I have searched but not come across it as yet.
View 5 Replies
View Related
Mar 10, 2012
So my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing.
Info:
Mac mini, Mac OS X (10.6.5)
View 12 Replies
View Related
Jun 15, 2012
I recently realized that I no longer have the Startup Disk preference pane in the Preference Panel. I sometimes boot from other drives and now I'm forced to hold down the option key at restart or startup instead of being able to select the startup drive through the Startup Disk pane.
MacMini 1.66 GHz Intel Core Duo
2GB 667 MHz DDR2 SDRAM
Mac OS X 10.6.8
Info:
Mac mini, Mac OS X (10.6.8)
View 4 Replies
View Related
Jun 24, 2012
In order to use Lion’s encrypted (Core Storage) external drive feature, I needed to reformat an external 1TB drive with Apple Partition Map, as that works only with GPT. The only partition was HFS+J formatted and was used as Time Machine Backup, which I wanted to preserve.
Act I:
I connected the drive to another iMac running 10.6 which happened to have enough space on the internal HD. I read this article http://support.apple.com/kb/HT5096 , which describes how to copy the BackupDB just by drag and drop. In hindsight, that was a bad idea, I should have created a disk image like suggested elsewhere, but if Apple itself suggests it, it can’t be so bad right?
So I just dragged the whole BackupDB to random folder on the iMac (after enabling ownership), and apparently it copied correctly the dir-hardlinks, as the resulting folder had the same size.
It seems that the Finder activates a special dir-hardlink aware copying mode when one does this. This is also confirmed by the fact that the Finder will refuse to copy the BackupDB together with other files, you have to drag and drop the BackupDB only.
Act II:
I reformatted the external drive as HFS+J with GPT and activated ownership.. But now, when I try to copy the BackupDB back, it continues to count indefinitely the number of files to copy! I speculate that the special dir-hardlink aware mode is not activated, but what can I do? How can I trigger it? Is there some hidden command line tool which handles this?
The lesson I’m drawing from this is: use the method described in the article only if you copy the backupDB from your old to your new drive.
Info:
Mac OS X (10.6.8)
View 1 Replies
View Related
Jul 2, 2012
I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 9, 2012
I've been having trouble backing up my MacBook Pro to my Time Capsule (hasn't backed up in months) so I ran Disk Utility and it gave the following error:Disk Utility stopped verifying "Hard Disk". This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.So, if I do that, will I end up losing whatever is on my hard disk? And how do I start up the computer using the OS X disk? Just put it in and restart?
View 2 Replies
View Related
Mar 27, 2012
I am most certain that this is the case: foolishly, I didnt leave much free space and now the disk doesnt want to mount. I tried the single user mode, I also booted from DVD, they appear but the disk utility shows the disk but I cannot repair the disk, because it is unmounted. I tried the basic commands in single user mode, no effect either. I still cant get over the blue screen with the apple logo and a circle running. I need to free up some spasce. Unforetunately, important files were not backedup, so I really cant delete the whole disk. I need to delete specific files. I dont know where are my big files located - so, how do I orientate myself among the folders? Lets say I would delete my itunes libary, which I would later on renew thanks to the back/up, how would I delete them?
Info:
MacBook, Mac OS X (10.5.8)
View 14 Replies
View Related
May 11, 2012
I have about a dozen users on my Apple server. What's the best way to see how much disk space on the several disks are being used by each username?
View 8 Replies
View Related
May 26, 2012
How can I add disk space to my mac mini server. An alais in the documents folder will not work. Running out fo disk space on my web server.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Jan 14, 2011
I am getting errors when I attempt to burn my back-up Snow Leopard .dmg in Toast 10 or Disk Utility. Is my superdrive faulty? Here are my error messages.
View 4 Replies
View Related
Apr 16, 2012
I am trying to install software updates but cannot as It says that I do not have enough space on my start up disk and I need to clear files from the HD. How I do this, and if I delete them into trash will I loose this information.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
View 3 Replies
View Related
Apr 4, 2012
i received message that I needed to free up space on the start up, can you tell me how to do that.
Info:
Mac Pro, Mac OS X (10.6.4)
View 2 Replies
View Related
