When a program crashes and the error report window opens, I fill it in the best I can and hit send.A new window opens that says "Submission failed, Your report could not be submitted. Please try again later." No matter how many times I try, minutes later, hours later, next day, they don;t go through.
Info:
Power Mac G-5, Mac OS X (10.5.7)
I got a 24" iMac, Processor 3.06 GHz Intel Core 2 Duo, Memory 2 GB 800 MHz DDR2 SDRAMÂ My main problem is that whenever I restart my iMac, two problem reports emerge, neither of which can be sent to Apple due to an additional message which reads "Submission Failed: Your report could not be submitted. Please try again." Anyway, the report reads as follows: Â
Process:Â Â Â Â Â Â Â Â LoaderAgent [86]
Path:Â Â Â Â Â Â Â Â Â Â Â /Library/Application Support/AVG/AgentTools/LoaderAgent.app/Contents/MacOS/LoaderAgent
Identifier:Â Â Â Â Â LoaderAgent
Version:Â Â Â Â Â Â Â Â ??? (???)
Code Type:Â Â Â Â Â Â X86-64 (Native)
[code].....
Now, normally I probably wouldn't have such a problem with this, however, some times when I put my iMac to sleep, I get a grey screen with a folder containing a question mark and a "non" sign over it. I have no idea what this means but I usually cannot turn my iMac back on for a half hour before it works again.
Info:
iMac, Mac OS X (10.5.7)
When i access safari it quits right after I get to the homepage.When I try to send the report I get the following message:
[code]...
Info:MacBookPro, Mac OS X (10.5.8)
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: kHW_IntelGMA965Item, GMA X3100, spdisplays_builtin, 144 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.22)
Bluetooth: Version 2.1.9f10, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2250BH, 232.89 GB
[Code]...
When I submit an error report I get the message... Submission Failed Your report could not be submitted. Please try again later. Is this common?Is there a problem with my computer?
Info:
MacBook, Mac OS X (10.5.8)
"Your report could not be submitted. Please try again later" but the report can never be submitted.Â
Info:
mac os x leopard, Mac OS X (10.5.8)
How to use Mac OS X Package Maker to code sign .pkg files for AppStore Submission? .pkg file is created too easily but how to code sign it for AppStore submission?
View 3 Replies View RelatedSo I have a macbook pro old model.Recent Problems:graphics card failedsystem crashed had to reinstall system crashed again and would be stuck on apple logo
now after i reinstalled SL after the stuck on logo problem my mac was fine.3 weeks later which is now it started to lag,slow,unresponsive.So i tried repairing disk utility and FAILED then i tried reinstalling osx FAILEDthen i had to delete my whole harddrive :*( and reformated the harddrive.FAILED AGAIN.calling apple is a no because i already called alot before so now they want to charge.So did i reformat wrong? something?
macbook refused to wake from sleep sometime - Mid 2010. Running Lion 10.7.4 Â
Get this error. Interval Since Last Panic Report: 204335 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 1
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â D1DBCB50-FBD2-4B25-A977-05DF5F0DBE0CÂ Â
Thu May 17 20:51:15 2012
panic(cpu 0 caller 0xffffff7f809c4947): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811864f000 0x0a5480a2, D0, P3/4
[Code]...
I'm getting the following report from LS on startup: ".sunupdate wants to connect to the following... then followed by a series of nonsense URLs: vxvhwcixcxqxd.com; stxeapbewbblp.com; and tygoiuoigwodd.com and then all again as .info/.net. What's going on?I've denied those connections in LS, but am now worried as I've heard about the Flashback trojan. I've also run through the Terminal commands to check and see if I'm infected, but those come back clean (or at least the instructions I followed for the '.K' version did... I don't know of any other check for other kinds).I've also written down the info for IP addresses, rev DNS names, process numbers, etc. that came along with the LS alert. But thought I'd better find out if it's a worry before typing in all that info.
View 5 Replies View RelatedApple is indeed well into the development of Mac OS X 10.6, which the company has internally code-named "Snow Leopard," according to ArsTechnica. Citing a person familiar with the situation, the technology website confirms several details of the next major Mac OS X upgrade first reported on Tuesday, including a scheduled release as soon as Macworld 2009 this coming January, and that it will not introduce any major new features.
Instead, Snow Leopard is said to focus heavily on performance optimization and security, a move that will in all likelihood widen the gap between Mac OS X and Microsoft's Windows Vista operating system in those areas. "Things like the MacBook Air, iPhone, iPod touch, and other mysterious devices that have yet to be announced need better performance for better battery life, and that's definitely something Apple wants to excel at in the years to come," wrote Ars' Jacqui Cheng. Unconfirmed is whether the software will be shown off or discussed at the company's annual developers conference next week. However, AppleInsider in recent weeks has been told to expect discussion of "another big cat" at the event................
I tried to upgrade my MacBook from 10.4 to 10.5 but the CD has a problem. The installation failed halfway through and now I can't remove it. I pnly get a blue screen and nothing else. I want to restore 10.4 but can't get the CD out to reboot with 10.4. I'm new to Mac, now on my PC
View 1 Replies View RelatedLately, my MacBook's been popping-up window after boot that says, "Connection failed. The server may not exist or it is not operational at this time." I don't know what server my Mac is trying to connect to. How/where can I look to see what's trying to connect, and to shut it off from trying at boot?
View 8 Replies View RelatedHaving tried to initiate a hardware test by inserting a Mac pro system disk and holding the "D" key down, I lost my usb sockets on the rear of the machine so the sysem hung trying to find the mouse and keyboard.
I managed to break out of this loop by connecting both to the front usb sockets and the machine is running as before. Is this permanent damage or is are the rear usb's retrievable ??
Info:
Mac Pro, Mac OS X (10.6.3), 3.0 dual with 4 gig ram
I have a desktop Mac that I used Migration Assistant to transfer my user setting etc. prior to selling my MacBook. All works well, except that everytime I try to print a document it pauses while looking for a shared network volume for a while before coming back saying "Connection Failed to MacBook". I deleted all printers and resent printers from preferences to add them back manually and repaired permissions however the problem is still happening everytime I try to print a document. Its as though its looking for the old MacBook.
Info:iMac, Mac OS X (10.6.8)
I updated to leopard and mail did work (in and out) until May 16, 2012.Now, nothing comes in (out still works) and my password in not being recognized.yes, I did check the preferences.Yes, I checked the pw by logging into the cloud.
Info:
Mac OS X (10.5)
I recently received an iMac as a "gift"... turns out it has some problems. I am unable to reinstall the default OS (Mountain Lion) because I have yet to be able to partition the HDD correctly. The error I keep getting is:Â Partition failed with the error: Wiping volume data to prevent future accidental probing failed.At this point, the default Macintosh HD isn't showing, so it must of been erased/deleted.Â
Info:
iMac
I tried installing Leopard on my iBook G4 and it did not succeed. Now, my computer has a half-installed upgraded OS that doesn't work. I was told at the Apple Store that my computer would run better with Tiger anyway since my processor is not up to snuff to handle Leopard (my iBook is from Jan 2006) and that I should erase the hard disk and re-install Tiger.
So now I'm trying to reinstall Tiger but when I insert the disk, start up the computer holding down the C key, the start stalls at the apple logo gray screen with the little cog spinning around. Nothing happens after that.
I was running 10.5.8 on both my white MacBook and Intel iMac 20," then I finally received the copy of Snow Leopard which I bought from Amazon. I decided to install it on my MacBook first to make sure the install would be successful before I upgraded my iMac, which has my important work stuff on it. The install was a success on the MacBook and after it was fully upgraded and updated, I simply opened "About This Mac" to verify the installation, opened Safari, browsed around for a minute, then proceeded to check out the new dock and airport menu features. After just a few minutes of playing around with it, I decided it was a legitimate installation, closed the MacBook, left it plugged into the power source, and walked to the other room to begin the upgrade onto my iMac. I left home for about an hour and once I had returned, the iMac installation was complete and it was running like a dream. After messing around on the iMac for a little while I decided to make sure the MacBook was still good to go. When I opened the Macbook up, all I saw was a blank screen. I assumed it was some sort of power-saver issue, because sometimes the screen doesn't like to come on right away when I open it up. My first instinct was to move my finger around on the trackpad and press some keyboard keys, which always wakes it up when this happens. Nothing seemed to be working, so at this point I pushed the power button and it proceeded to boot. As it began to boot I heard some sort of CLICKING from the HD, followed by a flashing folder with a question mark on the screen.
I assumed it was some sort of HD failure so I booted to the Snow Leopard install disk, ran Disk Utility and Startup disk, and my Mac COULD NOT FIND the HD - all it showed was the CD-ROM drive and Network Startup. I tried to reboot a few more times and almost gave up. It kept clicking at startup and I was thinking about the little magnetic arms in the HD. I thought they might be jammed in the HD for some reason. At this point, I didn't know what to do. So, as it was booting up again with the plain grey backdrop, as a last resort, pretending I was the Fonz or something, I physically whacked the area on my MacBook near the power button where the sound of the clicks was coming from. AS SOON as I did that, the clicking stopped and a few seconds later the APPLE ICON appeared... instead of that dreaded question mark folder icon! The MacBook started booting up back to it's upgraded self again! Finally I was back at the desktop, and with a sigh of relief, began typing this forum. Now, my question is WHAT THE @#$% HAPPENED?? And how on Earth did smacking it one actually fix it? Is this problem related to the recent installation of Snow Leopard or just my MacBook dying? (It is 2 years old) If anyone has any ideas as to what caused this, and how I can prevent this situation from happening in the future.
This is my first mac; were this a PC I would have fixed everything with flying colors by now. I have a PowerBook G4, 800mhz, that had Panther on it. I bought Leopard and went to install it, using the LeopardAssist program to be able to install it. I'm installing, everything is dandy, then about 10% through I get, "Install Failed". So I reboot and it refuses to reboot, staying at the gray loading screen for all eternity. I rebooted again, this time from the disc. Since Panther seems to have disappeared from my computer, LeopardAssist was no longer available as a program, so while it booted up I went into Firmware and entered the command line manually. But when it starts up, despite having entered (properly, I believe as I saw the "ok" message after each line in Firmware) the hack to run Leopard, it says Unable to install.
To fix the initial failed install problem I ran Disk Utility, but it simply said on verifying permissions, "Error: The underlying task reported failure on exit." So I ran fsck and got the OK and did it again, then rebooted and got the message on disk utility telling me it was "unmountable." Basically I cannot boot from Panther as it were--Panther is not listed when I try to choose where to boot from. And it came with Panther installed, so I don't have that install disk. I think at this point I need to figure out how to get my computer to install Leopard as it was doing; or at least to Verify and Repair the disk on Disk Utility so that I can Archive and Install, which--as it appears in the other forum questions--is the way to go.
This is the third drive that has failed since I was assigned this Mac Pro at work a few weeks ago, and the drive was purchased less than a week ago. The other two were older drives. They would suddenly stop being readable. Sometimes there was a problem ejecting the drive before it stopped becomeing readable (message would say the drive couldn't be ejected because another program is using it, when there were no programs open). One of them eventually mounted again and I recovered some of the files (but some files weren't readable when I tried to copy them). But that was just luck as they all seem now to be consistently unreadable. When I plug them in I get the message: "The disk you inserted was not readable by this computer". same if I plug it into a different computer. And when I try to repair, it shows this: http://i.imgur.com/ivK9d.png. When it happed to the second drive, I just thought it was a fluke... but now a third, brand new drive? Something about the computer must be causing it.
View 14 Replies View RelatedHad hd failure, replaced drive, restored time machine BU. Bu completed successfully. Most programs fail immediately.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
I lost the main HDD on my Mac G5 running Panther 10.4. I have a TM back up onto an external drive and bought a new internal drive.How do I restore all my files from the external back up to the new internal HDD so I can run my computer as it was.
Info:
Power PC G5, Mac OS X (10.4.10)
After multiple updates failed to install on a restart, including a security and Safari update, many applications on my mac do not work.I am receiving error messages such as this: [code] This leads me to believe that multiple frameworks went missing in the failed update; looking in the frameworks folder, the only ones there are iTunesLibrary.framework, NyxAudioAnalysis.framework, and PluginManager.framework. Where can I download these missing framework/fix the problem if there is more too it than that? Finder, system profiler, system preferences all work. Activity monitor shows everything as normal.
Info:
MacBook, Mac OS X (10.6.8), Model Identifier: MacBook1,1
I just tried to update my 2008 Macbook from Leopard to Snow Leopard. Install went fine but all of the sudden I got an error message, accompanied big yellow triangle with a black exclamation mark telling me that the install has failed without any further info. I rebooted and Snow Leopard was trying to install again. I thought 'why not' and continued. Then, when I had to pick a disk to install on, my Macbook harddrive couldn't be found. I thought 'screw this I'll stick to Leopard' and rebooted. After that it just stuck on the grey screen with the Apple and the loading animation. How I can fix this or at least save my files?
View 3 Replies View RelatedI have one of every type of the newest Macs: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro. Since upgrading them to Snow Leopard, none of them will connect to any wireless network -- regardless of the router (AirPort, Linksys, Cisco, etc.) and regardless of the type of security (open, WEP, WPA, etc.).
Every time I attempt to connect, I get the message that the "connection failed." Here's a 20 second screen recording of what's happening.
I have a white MacBook. I tried to update my 10.5.8 Leopard installation to Snow Leopard with the upgrade DVD I just got. Unfortunately, update failed on me. After being noticed by the installer that the update failed, I ended up with a NON-BOOTABLE MacBook, that whenever I try to boot from hard drive, after showing me 30 seconds of the "spinning ball" that indicates activity, shuts down. I tried it like 10 times, same result. What happens if I boot from DVD and try an installation that way? Will it try to upgrade? Will it wipe my hard drive content?
View 2 Replies View RelatedI was trying to update my G5 to snow leopard from leopard 10.5.5 when it said it could not install. So I decided to quit installation and boot from 10.5.5. It started up and reaches the apple loading screen but goes off without reaching the log in screen. I have tried booting from the CD again and resetting the PRAM but it still wont work and continues to do the same
View 2 Replies View RelatedI bought a new drive and need to get my Time Machine files off the old failed drive. I'm sure there are plenty of discussions about this but I can't find any. (I so dislike the new design for the support communities.)The old drive sometimes lets me access TM so I want to take advantage of one of those times to get everything across. I know it is a very slow process if it can be done
Info:Mac Mini 1.83ghz, Mac OS X (10.6.8), Great for a while.
My computer will not turn on now, when I start it, it tries to install again and fails.
Info:
MacBook, Mac OS X (10.4)
