OS X V10.5 Leopard :: Powermac G5 Will Not Boot After 10.5.6 Install
Feb 10, 2012
I recently inherited a Powermac G5 with 8gb ram(recognizes 6) 2x150gb HD which was at 10.5.8  HD1 was 10.5.8 HD2 is setup as backup most apps would not launch so decided to refresh and start over by erasing and installing anew 10.5.6 and going from there.Â
after install on HD1 and reboot the screen would hang at the grey screen with the Apple logo and spinning circle did option boot and selected that drive and system would barely get to the gray screen and shut down installed on HD2 and again it gets to gray logo screen and just spins(let it go for many minutes)Â
Info:
PowerMac, Mac OS X (10.5.6), PPC dual core 2ghz, 6gb Ram
View 7 Replies
ADVERTISEMENT
Jul 27, 2010
Okay, I have a power mac g4 sawtooth single CPU. I purchased a leopard install disk for the cheapest I could find without realising that it wasn't supported on this machine officially (I didn't get snow leopard because I knew that it only supported intel). So I inserted the disk (without modifying) and after booting to it got a kernel panic beginning with "the correct driver could not be found for this platform powermac 3,1". I then tried the open firmware hack many times and the same problem occured. I also tried the guide at [URL] many times even with putting in the kexts that the guide told me to if I was getting kernel panics but to no avail. I then managed to borrow my freinds intel mac and installed it to my guid partitioned 16 gb flash drive, I then cloned it to my APM partitioned other hard disk using superduper! and when booting got the same issue, I then put in the relevant kexts from the working tiger install but again to no avail
View 4 Replies
View Related
Feb 24, 2010
I have:
-one iMac with cracked screen -- currently being used via dual monitor setup
-one new MacBook Pro (running Snow Leopard)
-a legitimate, family pack DVD for Leopard
I want to:
-reformat the iMac and install Leopard on the iMac via Target Mode/firewire using the DVD drive on my MBP
However, when I try to boot the MBP from the Leopard DVD, nothing happens.
I know this is kind of a mess, but it's the only viable solution I have been able to come up with. I can't install Leopard on the iMac from the Leopard DVD because I can't see the screen (due to the huge crack on my iMac) and it does not show up on the extra monitor.
Is there a way to safely force the MBP to boot from the Leopard install DVD?
View 4 Replies
View Related
Nov 2, 2007
I have a G4 PowerMac that will not boot up. I power up the computer and it stalls on a grey screen with text prompting me to type <<boot>> if you wish to continue...or something like that. Does anyone have any advice on how I might troubleshoot this? The computer was working fine for a few days before this occured. It has been unused and sitting is storage for a while.
View 2 Replies
View Related
May 25, 2009
I have been trying to install leopard on a 867MHz 640mb ram powerbook g4 for about a week. i have restored the dmg to a partition, i have run the installer and successfully installed leopard( green check and prompted to restart). upon restart, system only boots to apple screen with spinning wheel. i let it sit there for approx. an hour and no change. I reset pram and nvram as well as pmu... anyone have any clue as to what the problem is?
View 4 Replies
View Related
Feb 19, 2008
I'm getting my Mac Pro in a few hours and plan to run Leopard on a 150GB Raptor. Will I need to boot off the orig drive initially (to partition or format the Raptor) or can I put the Raptor in one of the drive bays, boot off the restore discs and immediately load Leopard from the very first boot?
View 9 Replies
View Related
Jun 12, 2012
My brother's MacBook Pro (2009 13") won't boot from the Leopard install DVD. Here is what happened:
- I tried to do Bootcamp on it. I installed Windows 7 but realized that there were no Bootcamp drivers for that.
- Deleted Windows 7 and put the XP install disc in. Somehow, it formatted my Mac partition instead of my Windows partition.
- Now that the MBP was only running Windows XP, I connected it to my iMac in target disk mode and wiped it (GUID, one Mac OS Extended (Journaled) partition).
- I tried to put the Leopard (10.5.0) install DVD in there so I can restore from the Time Machine backup, and it sees it when I hold option at bootup but refuses to boot from it.
- I reset the PRAM and tried again, no luck.
Does it have to do with the fact that it was doing Bootcamp? I either want to boot from the disc or somehow restore from Time Machine some other way. I can use another computer (my iMac) if I need to.
View 6 Replies
View Related
Oct 1, 2008
I have a Power Mac G4 400MHZ 768 MB ram, I had OSX 10.4.11 installed on it and one day It got an error. a bunch of black text appeared over the web browser describing an error. I left the computer on for about an hour and when nothing happened I decited to restart it. When I started it up again the gray apple appeared but was soon after was covered by a black rectangle. so I decided to re-install the software. I keep getting an error about half way throgh so I decided to install my 10.2 cd's...that will not work either. i am not sure what to do.
View 2 Replies
View Related
Mar 3, 2012
I have an older Power Mac G5 Which is running OSX 10.4.11 and I procured a retail copy of OSX 10.5.1 Single Disc Install DVD. I tried to load it and it does not load and it appears to be frozen with a grey screen and the apple icon. I let it run for over an hour and nothing seems to be happening. [code]
Info:
PowerMac, Mac OS X (10.4.11)
View 14 Replies
View Related
Mar 13, 2008
I have posted a question on the Apple site, I would like to get some input from the people here as well.I wont bother typing out the whole thing, much simpler to let you go have a quick read at the questions and solutions I have tried.
View 2 Replies
View Related
Feb 15, 2010
I have a uMBP 2.26GHz with 4GB and 500GB HDD. I usually do the Disk Utility every once in a while and it recommended me to use the MAC OS X disk and repair the disk. I inserted the disk, restarted and held "C" and the disc was running and everything. Like 1 minute later my display went black but I can still hear the disc running. But that's all it happens. Everything runs but my display went black. This is a 3month old uMBP. This is the log from the Disk Utility
Verifying volume "Macbook Pro HD"
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 782820)
Missing thread record (id = 962550)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 54635 instead of 54637)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macbook Pro HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
View 3 Replies
View Related
Jun 12, 2012
I have this MacBook Pro from a friend and he asked me to repair it. I can`t: boot the Mac OS X install DVD and Snow Leopard , enter single-user mod (freeze), enter verbose mod (freeze), enter safe mod (only the apple appear and nothing happen) and whatever you can think off.I tried to reset using comand + option + o + r and ANYTHING you can think off. It just open with a flashing folder with a question mark on it. Btw i format the hard drive on my windows ( in hfs+ of course).
View 12 Replies
View Related
Dec 21, 2009
I'm trying to install Virtual PC on my G5 powermac running Leopard, but the capture disk doesn't show. I've contacted Microsoft and they said that they cannot help as the last supported version of VPC 7 is when it is installed on Tiger. I then tried to downgrade to Tiger but when I insert the installation disk that is for my G5 I get a prohibitive sign and it won't let me go any further.
Has anyone got any suggestions on what I can do. I just want my Mac to be able to run VPC 7 so that I can run some essential (for my work)PC software.
View 1 Replies
View Related
Dec 14, 2007
FYI I have a powermac G4 dual proccessor with mirror drive doors. im running mac os x 10.4. I am wondering if anyone has installed linux on a similar machine, I would like to know more before I try it. what version is best (ubuntu I heard is good?)? Must you reformat a drive or can you install in on a new internal drive? any information really.
View 24 Replies
View Related
Oct 15, 2008
So i have a mac Pro octo from May 2007. I upgraded to the 8800GT when they came out and not have any problems since. Today I encountered some problems with my hard drive and am trying to boot from either my Mac Pro Install disc or my Leopard Install disc and get an error everytime. When I try and boot from the disc it gives me an error and tells me i need to reboot. I have found out through the apple discussion forums that Leopard Discs before 10.5.2 do not have the drivers for the 8800GT, and therefore will not let you boot. What am I to do here. Is there any way I can get a newer leopard install disc? It seems I am going to have to reinstall an Ati X1900 to get my own install discs to work. This is really annoying to me, this is an awful design flaw. How do they expect you to upgrade your mac pro and not have problems like this.
View 2 Replies
View Related
Jan 30, 2010
I know this is my first post, but I had no where else to go on the internet.
My problem is, I was trying to install Windows XP on Leopard for boot camp. Something went wrong and now it gives a message saying "no bootable device".
Its almost like its confused to where its booting from. So now, it won't boot past the white screen with the apple logo - that doesn't even appear! Its a grey screen that goes to a black screen which reads that message. I can't get into OSX.
I think I may of partitioned the drive and whiped the computer clean, but being a casual computer person I have no idea what to do.
I have my original Mac OSX disc that came with the computer.
View 2 Replies
View Related
Jun 10, 2012
I have a PowerMac G4 I'm trying to install safari 5.0.3 but it has this error message. I looked everywhere but there is no other version of safari?
Info:
PowerMac, Mac OS X (10.5.8)
View 2 Replies
View Related
Mar 4, 2009
Anyone know if after a Leopard re-install, my boot camp partition of Windows XP will remain untouched and working like before?
View 2 Replies
View Related
Oct 20, 2009
So, today I tried to install windows through boot camp assistant on my mac. When it got to partitioning my drive I got an error that my hard drive needed repairing. So I opened up disk utility and clicked verify disk (I can't click repair) and got this error Disk Utility stopped verifying �Chris Hard Drive� because the following error was encountered: Filesystem verify or repair failed. I then researched this and learned to fix the problem I must boot from my leopard install disk and use the DU from their. Unfortunately I don't have access to the disk. But I have the install disk from my old macbook (the white one) so I used this. I put in the disk and shut down. When I turn it on I hold C but all I get is a grey screen but with out the apple logo. When I try turning it out holding alt I don't get the option of the CD just Chris Hard Drive. But when I boot up holding D i do get to the hardware test screen but I get the error that's something like "Hardware test does not support this hardware". Will the Leopard install of a different type of macbook not work on my new macbook pro (13" aluminium)?
View 1 Replies
View Related
Feb 13, 2010
I've been having big problems trying to solve my problem. I've checked all the posts related, tried all the solutions and still I didn't get anything, so I'm sharing my problem and hope for someone to have the solution.
I installed Windows XP with BootCamp and it was working fine.
But then the HD space of the windows partition was too small and I needed more space. So what I did was erase the partition with the Disc Utility.
But before that I wanted to test the Parallels to see if the windows 7 would work fine with it. It installed easily but I didn't like the performance of it, so I just erased it with the AppCleaner. Then I erased the BootCamp partition with Disc Utility.
But when I tried to use the Boot Camp Assistant again, it only gave me the message: "The Disk Cannot Be Partitioned Because Some Files Cannot Be Moved"I've checked the forums and it was said that probably if I use iDefrag, it would solve my problem.Once I did it, I still got the same message.Then I decided to repair the dic, so I did the verification and clicked on Repair Disc Permitions and I've got this message:
-The file SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" was modified and cannot be repaired.
Then I decided to reboot the whole system inserting the installation disc and pressing the C button, but all I get is a white screen and no response. And sometimes the Macbook not even start properly (also having only the white screen and no response), so I need to press the Option button till the Mac HD icon appears and I can access the computer.
And now I really without any option and I wanted to install the windows.
View 4 Replies
View Related
May 12, 2010
I got my new Macbook today. I've reformatted and installed Snow Leopard. Then I set up Boot Camp and installed Windows 7. I installed all the drivers under Windows 7 using the Snow Leopard install disc. One problem that remains is under Windows 7, I can't tap the trackpad to click. I have to use a mouse.Anyone know of a fix? Can't find it under Apple Support at all.
View 2 Replies
View Related
Mar 26, 2012
I bought a Mac OSX 10.6.3 Snow Leopard CD (Family Pack) to upgrade on my Macbook Pro, but it won't boot. There are sound like it was running but it reject in the end. My Macbook Pro is Intel Core Duo 2GHz with 2GB Ram. It is currently running OSX 10.5.8. I tried the disc on other Macbook running 10.6.6 purchased 2-3 years ago and it work. So I don't really know what happen with mine. My DVD drive work fine though.
View 8 Replies
View Related
Dec 31, 2009
I bought a brand new Seagate 400Gb hard drive for my PowerMac G4 MDD FW800. I installed it in the back bay, as a slave drive. When I power on the Mac, I get a blank grey screen. The original hard drive with OS 10.4.11 is set as the master, so I don't know why it won't boot properly. I've checked for bent pins, and I don't see any obvious ones, so I'm completely confuzzled.
View 1 Replies
View Related
Feb 11, 2012
Got an iMac G5 manufactured in 07' (PPC) from a relative and I am trying to erase the HD and restore.I'm putting the disc in it gives me a kernel panic screen- Grey install disc 10.4.10 Not sure what the heck is goin on here. New to mac's this is what code is shown at top of kernel panic screen- cpu 0 caller(0x002E59BC) Unable to find driver platform PowerMac 12, 1
Info:
iMac, Mac OS X (10.4.10)
View 1 Replies
View Related
May 14, 2009
I recently purchased from a friend a Powermac G4. It was running Panther (i Think). Because it wasnt running all too well, I decided to give Leopard a go.
I had an extra copy of Leopard lying around, so I installed it. It booted up fine, and was working, until I restarted the computer. Now it doesn't boot up at all, and I get a grey screen with a folder with the mac symbol and a question mark on it. What have I done? And how to I fix it?
View 2 Replies
View Related
Apr 15, 2012
I have Snow Leopard Mac OS 10.6.8, and I am trying to install my multifunction Canon printer. It detects and prints fine, but it won't detect my scanner or fax. I have no hard line for the fax - I use CableVision's wireless router for phone and internet. Is there a way for me to use either function (scanner or fax) with my Mac? I have an older Canon stand-alone scanner, Canoscan N1240U, and it won't detect that either...
Info:
PowerMac, Mac OS X (10.6.8)
View 5 Replies
View Related
Apr 22, 2012
Can I install Snow Leapord or Lion on a Powermac 10.1 Mini with PowerPc processor 1.42 GH processor speed and 1 GB of memory? Current OS is 10.3.
Info:
Imac 27, Macbook Pro 13,Imac 24, Mac OS X (10.7)
View 3 Replies
View Related
Nov 11, 2010
My 2006 Intel MacBook won't boot up...I just get the grey screen with a folder/question mark. I assume my hard drive has died.
Is it possible to boot the MacBook from an external HDD that I have backed up the boot drive for my PPC PowerMac G5? If so, how would I do this?
View 3 Replies
View Related
Feb 18, 2010
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
View 15 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
