Software :: Can't Install Mac OSX 10.4 On PowerMac G4?
Oct 1, 2008
I have a Power Mac G4 400MHZ 768 MB ram, I had OSX 10.4.11 installed on it and one day It got an error. a bunch of black text appeared over the web browser describing an error. I left the computer on for about an hour and when nothing happened I decited to restart it. When I started it up again the gray apple appeared but was soon after was covered by a black rectangle. so I decided to re-install the software. I keep getting an error about half way throgh so I decided to install my 10.2 cd's...that will not work either. i am not sure what to do.
View 2 Replies
ADVERTISEMENT
Mar 3, 2012
I have an older Power Mac G5 Which is running OSX 10.4.11 and I procured a retail copy of OSX 10.5.1 Single Disc Install DVD. I tried to load it and it does not load and it appears to be frozen with a grey screen and the apple icon. I let it run for over an hour and nothing seems to be happening. [code]
Info:
PowerMac, Mac OS X (10.4.11)
View 14 Replies
View Related
Dec 21, 2009
I'm trying to install Virtual PC on my G5 powermac running Leopard, but the capture disk doesn't show. I've contacted Microsoft and they said that they cannot help as the last supported version of VPC 7 is when it is installed on Tiger. I then tried to downgrade to Tiger but when I insert the installation disk that is for my G5 I get a prohibitive sign and it won't let me go any further.
Has anyone got any suggestions on what I can do. I just want my Mac to be able to run VPC 7 so that I can run some essential (for my work)PC software.
View 1 Replies
View Related
Dec 14, 2007
FYI I have a powermac G4 dual proccessor with mirror drive doors. im running mac os x 10.4. I am wondering if anyone has installed linux on a similar machine, I would like to know more before I try it. what version is best (ubuntu I heard is good?)? Must you reformat a drive or can you install in on a new internal drive? any information really.
View 24 Replies
View Related
Feb 10, 2012
I recently inherited a Powermac G5 with 8gb ram(recognizes 6) 2x150gb HD which was at 10.5.8  HD1 was 10.5.8 HD2 is setup as backup most apps would not launch so decided to refresh and start over by erasing and installing anew 10.5.6 and going from there.Â
after install on HD1 and reboot the screen would hang at the grey screen with the Apple logo and spinning circle did option boot and selected that drive and system would barely get to the gray screen and shut down installed on HD2 and again it gets to gray logo screen and just spins(let it go for many minutes)Â
Info:
PowerMac, Mac OS X (10.5.6), PPC dual core 2ghz, 6gb Ram
View 7 Replies
View Related
Jul 27, 2010
Okay, I have a power mac g4 sawtooth single CPU. I purchased a leopard install disk for the cheapest I could find without realising that it wasn't supported on this machine officially (I didn't get snow leopard because I knew that it only supported intel). So I inserted the disk (without modifying) and after booting to it got a kernel panic beginning with "the correct driver could not be found for this platform powermac 3,1". I then tried the open firmware hack many times and the same problem occured. I also tried the guide at [URL] many times even with putting in the kexts that the guide told me to if I was getting kernel panics but to no avail. I then managed to borrow my freinds intel mac and installed it to my guid partitioned 16 gb flash drive, I then cloned it to my APM partitioned other hard disk using superduper! and when booting got the same issue, I then put in the relevant kexts from the working tiger install but again to no avail
View 4 Replies
View Related
Jun 10, 2012
I have a PowerMac G4 I'm trying to install safari 5.0.3 but it has this error message. I looked everywhere but there is no other version of safari?
Info:
PowerMac, Mac OS X (10.5.8)
View 2 Replies
View Related
Dec 31, 2009
I bought a brand new Seagate 400Gb hard drive for my PowerMac G4 MDD FW800. I installed it in the back bay, as a slave drive. When I power on the Mac, I get a blank grey screen. The original hard drive with OS 10.4.11 is set as the master, so I don't know why it won't boot properly. I've checked for bent pins, and I don't see any obvious ones, so I'm completely confuzzled.
View 1 Replies
View Related
Feb 11, 2012
Got an iMac G5 manufactured in 07' (PPC) from a relative and I am trying to erase the HD and restore.I'm putting the disc in it gives me a kernel panic screen- Grey install disc 10.4.10 Not sure what the heck is goin on here. New to mac's this is what code is shown at top of kernel panic screen- cpu 0 caller(0x002E59BC) Unable to find driver platform PowerMac 12, 1
Info:
iMac, Mac OS X (10.4.10)
View 1 Replies
View Related
Mar 29, 2009
If I get a powermac g5 or mac pro housing what elese would I need?
Where can I get X86 compatible parts etc? Thanks for your help.:apple
It would be Intel maybe Quad Core?
View 4 Replies
View Related
Jun 18, 2010
I currently have a G5 powermac (and a macbook pro) and was looking to find out what cables I would need to get them connect to my TV. I have a 27" full HD LG tv which has these connections
- HDMI in
- USB in
- RGB in (pc)
- DVI-D in (pc)
- RS 232c in
View 3 Replies
View Related
Aug 1, 2010
There is a Powermac G5 available in my area for $450. Its a dual core 2.3 and a nvidia GeForce 6600 and he is including a 20 inch ACD. I don't know if its a great deal, but I think it would be great, because I could build something wild in that case later.
View 6 Replies
View Related
Feb 8, 2012
i need a free disc's to install on my g4 as it got 9.something on it i need 10.4 or lower ? i dont really now as i'm new to macs but i got given a macbook pro 10.4.10 install discs they are silver some one said they are surpossed to be black.
Info:
iPod touch
View 2 Replies
View Related
Apr 29, 2012
How do I get this old OS updated? I have exhausted the updates and need an upgrade...
Info:
Power Mac G5 (Late 2005), Mac OS X (10.4.11)
View 1 Replies
View Related
Nov 17, 2010
I recently bought a PowerMac G4 1.42GHz Dual Processor. It has 2 gigs of RAM on it. It was a fair deal I think. The "thing" is still looking like new and shiny. Even the insides are still tidy and intact. My question is, would I still be able to pump more juice from this beast. It still run fast comparable to some decent windoze box. Up to how much processor can i be able to squeeze out the CPU and if possible, how to?
View 12 Replies
View Related
Apr 18, 2007
I have a G4 Power Mac. It's the "digital audio" model that has been upgraded with a 1.2Ghz G4 processor. It works well except for one thing. It shuts down randomly and suddenly. Then after 5 or 10 minutes it turns itself back on, reboots and runs fine. (It is set to re-boot after a power failure.)I suspect what is happing is the power supply is turnning itself off due to some kind of a thermal, self protection switch. The fan seems to work but the PS gets warm.What's the cure? Replace the power supply? If so where to get a new(er) one?
View 1 Replies
View Related
Nov 2, 2007
I have a G4 PowerMac that will not boot up. I power up the computer and it stalls on a grey screen with text prompting me to type <<boot>> if you wish to continue...or something like that. Does anyone have any advice on how I might troubleshoot this? The computer was working fine for a few days before this occured. It has been unused and sitting is storage for a while.
View 2 Replies
View Related
Mar 7, 2008
I just upgraded from a Powermac G3 (1st rev.) to a Powermac G4 DP 1.25 ghz... so much faster! Any other fans here? Any cool stories to tell about it?
View 17 Replies
View Related
May 28, 2008
I want to add USB 2.0 to my Digital Audio PowerMac G4. Could anyone recommend a good PCI card that supports deep sleep?
View 3 Replies
View Related
Jun 11, 2008
I have a PowerMac G5 dual 1.8ghz running leopard. It worked flawlessly since the day I bought it.
Then as of last week whenever I booted the computer I would get the gray screen with a black box saying to reboot the computer (in 5 different languages). I would reboot the computer. Same screen.
Is there some way to check what is wrong? Is this typically a hardware issue or an operating system?
View 7 Replies
View Related
Sep 19, 2008
I was installing Tiger using FireWire from my Powermac G4 and it was nearly done when my Powerbook (target) died due to lack of battery... When the Powermac was rebooted, I get only a question mark and flashing smile.
I tried to test the C and T keys holding them down during boot up but only get the smiley face every single time... I even disconnected the secondary drive to no avail.
View 3 Replies
View Related
Sep 22, 2008
Please could you help me with this problem that i've got with my Powermac G5.
Spec is
Dual G5
2gb ram
I'm trying to boot from the Mac OS cd (tried 10.4 that it came with and 10.5) and both get to the grey screen with the Apple Logo and that's as far as it gets. No spinning loading wheel.
Tried the following..
PRAM reset
Swapping Ram out
Is there anything else i can do. It's a really good machine so i hope it's not needing a Logic Board repair!
View 6 Replies
View Related
Jan 27, 2009
Currently it is almost entirely unresponsive. I came to wake it from sleep a few days ago and it refused to wake. It is totally unresponsive to the power button on the Apple Cinema display and when the power button on the front of the tower is used the button lights up blue and then goes out. There is no fan activity or other sign of life. There is no burned oder or evidence of anything charred.It is a dual 1.42 MDD FW800 machine with AGP graphics. Model: M8570So far I have:
-Removed and reseated the graphics card, RAM and other PCI cards.
-Removed battery and let it sit unplugged over night.
-Performed PMU reset. (once)
At this point I have come to believe the power supply needs to be replaced. it is model: 614-0224 (360w). After looking online they are stupidly expensive, from $180 to over $500 each. I will be ordering a new MB (PRAM?) battery (Saft 3.6v LS14250C) and replacing that as well.
Questions:
- Have I missed anything here? Is there any other explanation or method of troubleshooting I should try?
- Is there any cheaper source for the power supplies? Why are they so absurdly expensive? Does anyone here want to give me a sweetheart deal on one?
- Can anyone recommend a source for the LS14250C battery locally in Manhattan? Radioshack has it as an online only item and wants $15 for it.
View 8 Replies
View Related
Feb 13, 2009
Hey all, so Im pretty knowledgable when it comes to my mac but I just cant figure out why its running so slow. For example It takes about 10-12 seconds to open up firefox, thats just crazy.
I have repaired permissions, verified my disk, and even ran a techtools fullscan. Nothing seems to be working. Ive got 6.5 gigs off ram in this thing (doubt it reads it all), 150gig sys HD plus many externals for file dumping, and an ati radeon 256mb vid card plus the newest OSX.
View 4 Replies
View Related
Apr 7, 2009
What type of ram does the powermac g4 use? im looking into buying some and the about this mac just says sdram,but newegg has two different types of sdram. so what type does it use
View 2 Replies
View Related
May 14, 2009
I recently purchased from a friend a Powermac G4. It was running Panther (i Think). Because it wasnt running all too well, I decided to give Leopard a go.
I had an extra copy of Leopard lying around, so I installed it. It booted up fine, and was working, until I restarted the computer. Now it doesn't boot up at all, and I get a grey screen with a folder with the mac symbol and a question mark on it. What have I done? And how to I fix it?
View 2 Replies
View Related
Aug 18, 2009
I am now looking at the possibility of transferring the system into a G5 PowerMac Case. Why G5? Because they are cheaper than the Mac Pro cases and Mac Pro cases are even more rare than the G5 ones (in the UK anyway). Anyway, how difficult do you reckon this would be? I have been looking on InsanelyMac forum and it appears that the way to go would be to buy a removable motherboard tray from something like a Lian-Li case but what about the PSU/Drives/Cards, etc? What do you think? Is it worth the effort?
View 6 Replies
View Related
Nov 4, 2009
I have always been in love with the power mac G5's.so, I am going to sell my G4 mac mini to buy one. I was wondering if I would be better off buying a single 1.8 and buying 2 gigs of ram. or, buying a dual 1.8 and only having the 1gb of ram?
View 18 Replies
View Related
Jan 12, 2010
I was able to get this machine to connect to my wireless home network, yet I still get the "Server cannot be found" error. Have tried with the old IE program, then I downloaded an older version of Safari on my iMac and transferred it via disk to the PMG4. The safari loaded fine, a window opens, yet it will still not connect. There must be a setting I'm missing - can anybody tell me what it is?
View 4 Replies
View Related
Aug 9, 2010
I'm just curious, does anyone know where the ninth G5 powermac fan is?
Theres:
1 spinning storage
1 pci cards
4 processor and ram
2 on the front of the PSU
where's the ninth?
View 2 Replies
View Related
