MacBook Pro :: Can`t Boot Mac OS X Install DVD And Snow Leopard
Jun 12, 2012
I have this MacBook Pro from a friend and he asked me to repair it. I can`t: boot the Mac OS X install DVD and Snow Leopard , enter single-user mod (freeze), enter verbose mod (freeze), enter safe mod (only the apple appear and nothing happen) and whatever you can think off.I tried to reset using comand + option + o + r and ANYTHING you can think off. It just open with a flashing folder with a question mark on it. Btw i format the hard drive on my windows ( in hfs+ of course).
View 12 Replies
ADVERTISEMENT
Mar 26, 2012
I bought a Mac OSX 10.6.3 Snow Leopard CD (Family Pack) to upgrade on my Macbook Pro, but it won't boot. There are sound like it was running but it reject in the end. My Macbook Pro is Intel Core Duo 2GHz with 2GB Ram. It is currently running OSX 10.5.8. I tried the disc on other Macbook running 10.6.6 purchased 2-3 years ago and it work. So I don't really know what happen with mine. My DVD drive work fine though.
View 8 Replies
View Related
Feb 13, 2010
I've been having big problems trying to solve my problem. I've checked all the posts related, tried all the solutions and still I didn't get anything, so I'm sharing my problem and hope for someone to have the solution.
I installed Windows XP with BootCamp and it was working fine.
But then the HD space of the windows partition was too small and I needed more space. So what I did was erase the partition with the Disc Utility.
But before that I wanted to test the Parallels to see if the windows 7 would work fine with it. It installed easily but I didn't like the performance of it, so I just erased it with the AppCleaner. Then I erased the BootCamp partition with Disc Utility.
But when I tried to use the Boot Camp Assistant again, it only gave me the message: "The Disk Cannot Be Partitioned Because Some Files Cannot Be Moved"I've checked the forums and it was said that probably if I use iDefrag, it would solve my problem.Once I did it, I still got the same message.Then I decided to repair the dic, so I did the verification and clicked on Repair Disc Permitions and I've got this message:
-The file SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" was modified and cannot be repaired.
Then I decided to reboot the whole system inserting the installation disc and pressing the C button, but all I get is a white screen and no response. And sometimes the Macbook not even start properly (also having only the white screen and no response), so I need to press the Option button till the Mac HD icon appears and I can access the computer.
And now I really without any option and I wanted to install the windows.
View 4 Replies
View Related
May 12, 2010
I got my new Macbook today. I've reformatted and installed Snow Leopard. Then I set up Boot Camp and installed Windows 7. I installed all the drivers under Windows 7 using the Snow Leopard install disc. One problem that remains is under Windows 7, I can't tap the trackpad to click. I have to use a mouse.Anyone know of a fix? Can't find it under Apple Support at all.
View 2 Replies
View Related
Mar 31, 2012
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Apr 2, 2012
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.Â
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".Â
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:Â
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - failÂ
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Feb 24, 2010
I have:
-one iMac with cracked screen -- currently being used via dual monitor setup
-one new MacBook Pro (running Snow Leopard)
-a legitimate, family pack DVD for Leopard
I want to:
-reformat the iMac and install Leopard on the iMac via Target Mode/firewire using the DVD drive on my MBP
However, when I try to boot the MBP from the Leopard DVD, nothing happens.
I know this is kind of a mess, but it's the only viable solution I have been able to come up with. I can't install Leopard on the iMac from the Leopard DVD because I can't see the screen (due to the huge crack on my iMac) and it does not show up on the extra monitor.
Is there a way to safely force the MBP to boot from the Leopard install DVD?
View 4 Replies
View Related
Jul 14, 2010
Did a search through here but couldn't find anything concrete. What are the differences between a fresh Snow Leopard install and a factory Snow Leopard install? I ask because I bought an Intel SSD and don't know if I should bother cloning the hard drive that will come with my new 15" MBP or I should just install a fresh copy from a Snow Leopard install disc. I'm aware macs come with next to no junk pre-installed, but are there some factory settings that are worth preserving if they aren't documented well?
View 11 Replies
View Related
Sep 4, 2014
I tried to install Snow Leopard on my MacBookPro but it cannot install and cannot be ejected. I need to eject.Â
The reason for this is a long story. My logic board was replaced and my Mac was wiped clean. I am not trying to recover from back up but could not figure out the next step after the recovery finished. So I tried to install OSX from the disk that came with my Mac. Probably not the right corrective action. Â
I need to remove the Snow Leopard DVD and finish my recovery.
View 4 Replies
View Related
Jun 12, 2012
My brother's MacBook Pro (2009 13") won't boot from the Leopard install DVD. Here is what happened:
- I tried to do Bootcamp on it. I installed Windows 7 but realized that there were no Bootcamp drivers for that.
- Deleted Windows 7 and put the XP install disc in. Somehow, it formatted my Mac partition instead of my Windows partition.
- Now that the MBP was only running Windows XP, I connected it to my iMac in target disk mode and wiped it (GUID, one Mac OS Extended (Journaled) partition).
- I tried to put the Leopard (10.5.0) install DVD in there so I can restore from the Time Machine backup, and it sees it when I hold option at bootup but refuses to boot from it.
- I reset the PRAM and tried again, no luck.
Does it have to do with the fact that it was doing Bootcamp? I either want to boot from the disc or somehow restore from Time Machine some other way. I can use another computer (my iMac) if I need to.
View 6 Replies
View Related
Feb 15, 2010
I have a uMBP 2.26GHz with 4GB and 500GB HDD. I usually do the Disk Utility every once in a while and it recommended me to use the MAC OS X disk and repair the disk. I inserted the disk, restarted and held "C" and the disc was running and everything. Like 1 minute later my display went black but I can still hear the disc running. But that's all it happens. Everything runs but my display went black. This is a 3month old uMBP. This is the log from the Disk Utility
Verifying volume "Macbook Pro HD"
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 782820)
Missing thread record (id = 962550)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 54635 instead of 54637)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macbook Pro HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
View 3 Replies
View Related
Jul 3, 2012
Today I performed a clean install of Snow Leopard on my late 2009 Mac Mini. After completing the installation, I began running software update to bring everything up-to-date.While software update did find and install a number of updates (10.6.8v1.1 Combo update, Security Update 2012-002, Apple Software Installer Update, iLife Support 9.0.4, Remote Desktop Client Update 3.5.3, Airport Utility, Java, Safari) it did not find an update for iTunes (which starts at version 9.x, I believe, in a SL clean install).I assumed that this was some sort of random glitch and manually downloaded and installed iTunes 10.6.3.After that, I re-installed iLife '11 (from a retail DVD, not the App Store).When I ran Software Update again, it found updates for Garage Band, iDVD, and iWeb, but it did not show the updates for iPhoto and iMovie.I found this to be unnerving, as I performed a clean install when I first obtained this Mini a few months ago and didn't experience any of these problems - all of my Apple software updated automatically through Software Update without a hitch.
I began researching this problem online and found that other people have been experiencing this same problem (or some variation of it), and it seems like it began appearing around the time Apple updated some of its security certificates in March.In particular, I've found several references to the missing iPhoto update.This one is especially noticeable because an iPhoto library created in iPhoto 9.2.3 will not open in iPhoto 9.0, and this generates an error upon opening the program (i.e., a user backs up their iPhoto library created in 9.2.3, performs a SL clean install, reinstalls iLife, goes through the Software Update process until it shows that no more updates are available, and are shocked to find that they are unable to open their backed up iPhoto library because they have an out of date version of iPhoto).The most common (and admittedly logical) solution proposed in the threads I've read is to download any necessary updates directly from the Apple website. However, I am curious as to why this previously functional feature now appears to be broken.Has anyone else been struggling with this? Does it indeed have something to do with the new security certificates? Is Apple aware of the problem?
Info:
Mac mini, Mac OS X (10.6.8)
View 3 Replies
View Related
Sep 5, 2010
I need your help diagnosing this early 2007 Macbook Pro running the latest version of Snow Leopard. It isn't mine, rather my sister's, so I don't know the full details of everything as I don't see her all the time. Last December, I swapped in my 160gb 5400RPM SATA drive from my late 2006 MBP into her MBP as I had just bought and installed a 500gb 7200RPM drive into my MBP. I installed a fresh copy of Snow Leopard onto her machine, patched it up, and sent her on her way.
A few weeks ago, she came to me saying she was having trouble booting into OS X and was just having trouble using her laptop in general. The hard drive wasn't making any erratic noises, so I figured the system install had corrupted itself. The problem was I wasn't able to boot to the Snow Leopard DVD. The DVD would show up at boot when holding down the Option key to show boot devices, but when clicked, it would show the Apple logo, then the "prohibitory" symbol and the fans would spin up on full blast, with no further progress.
Booting into Single User mode, I was able to run disk repair and after running it over a few times, I was told the drive was without errors, the laptop booted fine (minus the booting to Snow Leopard DVD) and I gave the MBP back to her.
Fast forward to today, she's having issues booting in to OS X again. It'll show the Apple boot logo, but the small spinning circle will freeze, and the whole laptop will come to a halt. I still can't boot to the DVD either, with the same symptoms as above. I'm sure I can boot into Single User mode, run Disk Repair, and probably be good, but I want to attack this issue at the source.
Is the hard drive I've got in her MBP going bad (I can't hear any of the erratic noises you hear when you know a drive is going bad)? What else could it be? What about the inability to boot to the Snow Leopard DVD? What is the problem and how can I fix it? Thanks, and sorry for the long winded post.
View 1 Replies
View Related
May 14, 2012
I want to reformat my hdd and split it on few partitions but i get following problems
- Disk utility doesn't allow to split it, i check it in single user mode, nothing works
- Doesn't want to boot, I tried to boot it from external hdd, usb, cd, dvd, nothing works, I just see Grey apple and that's it,nothing happends
I left it even like that for whole night and nothing happened..I did scan disk, check blocks etc. no errors :/ it give me some filesystem error (which i googled and it sayd you need to boot from different partition so it will work) c, cmd r, doesnt work..starting with opt key gives me list of devices but it freezes after My macbook pro is from mid 2010, 8 gb of ram (i did change it by myself, but works perfectly)The os snow leopard works perfectly, but I need to split the partition..Tried to reinstall os but it stops after restart (in middle of instalation) , it gives me grey apple and thats it.I don't have original dvd, lost it some time ago, can't get new one since I moved to middle of nowhere(no apple shops or anything)single user mode commands would be most helpful, id just format the hdd and split/reinstall the os from zero..Is there any chance to reformat/partition hdd from single user mode? or any software that I can boot from ?
Info:
MacBook Pro (17-inch Mid 2010), Mac OS X (10.6.8)
View 14 Replies
View Related
Aug 28, 2009
I was planning to get Snowey and a SSD at the same time, but the latter had to wait. So far, I�m seeing at least a ten seconds improvement in boot time with Snow Leopard:
17" Macbook pro unibody 2.93 Ghz, 4 GB ram 7200rpm HD
before SL: boot up from 39 to 55 seconds
after SL: boot up time from 30 to 39 seconds
Ok, so there is no interest in this topic.
For me boot time is a rather important criterium.
And I think the fact that SL reduce this with almost 10 seconds is AMAZING.
View 24 Replies
View Related
Aug 28, 2009
It just hangs at the spinning pinwheel. I shut the machine off and booted it into Verbose-mode (Command-V) and it stops at "Initializing Power Manager" or something very early on. I pulled the battery and unplugged the machine, am letting it cool off (not that there's a point) -- it's one of the original MacBooks that had that "shutoff" problem with the wire that'd melt and short to the heatsink but mine never had the issue because I wasn't using it very often at the time. Any ideas? The drive does show up when I hold down Option.
View 24 Replies
View Related
Oct 14, 2009
I have been trying to boot into 64-bit kernel in Snow Leopard on my Late 2008 Aluminum MacBook (2.4 GHz), but it is not working. It is running the 64-bit EFI firmware and is updated to 10.6.1.
View 9 Replies
View Related
Nov 27, 2009
My leopard installation was giving me a lot of headache so I thought of doing a clean install. Now that Snow Leopard had been out for quite sometime and many issues solved; I thought of installing it instead of Leopard. All I did was follow the instructions to install Snow Leopard [the only option with Snow Leopard was that it did an "Archive and Install" kind of thing by default]. It did take a lot of time [1 hour?] and I was finally taken to my desktop. I looked to check if everything was okay. Though there was nothing spectacular about Snow Leopard. I shut the computer down. Today morning I get this and I can't boot.
View 4 Replies
View Related
May 17, 2012
After dropping my macbook I had a black screen with just a cursor that would move though could not perform any actions. After reseting pram and smc, i now get to the screen with the stars and what looks like the aurora borealis or whatever. The cursor is there though nothing is happening when trying to click and when i press any keys, i gent that *dunt* noise indicating i have tried an invalid action. Does anyone know what might be the problem? I m hoping i wont need a new hd or mobo. This is my first time on the apple forums.
Info:
MacBook, Mac OS X (10.6.4)
View 1 Replies
View Related
Jun 4, 2012
I couldn't find my problem between discussed Issues in the forum.
when i insert my DVD into my ROM, i doesn't boot from it, and it ejects automatically, i can boot other OS, Like WIndows or Linux, if i take to service somewhere it costs alot, the boot page (White page, by holding "Alt Option Key") doesn't recognize the DVD, and it does other OS DVDs.
Info:MacBookPro, Mac OS X (10.6.4)
View 4 Replies
View Related
Jun 13, 2012
I have a Macbook Pro 17" with 10.6.8 installed but won't bootup. It stays on the logo and spinning gear screen and won't proceed from there. I have tried to reboot from a Snow Leopard install disk but it won't recognize it and haven't been able to startup from another computer using firewire connection.
Info:
MacBook Pro, Mac OS X (10.6.8), stays on logo and rotating gear
View 1 Replies
View Related
Jun 23, 2012
I got a used MacBook Pro 2.53 GHz 17" (Mid-2010 - MC024LL/A - MacBookPro6,1 - A1297) running Lion only.Â
I want to put Snow Leopard on one of the partitions, because I still need to use Rosetta from time to time. The computer didn't come with any installer disks... "no problem," I thought, because I own a Snow Leopard installer DVD (which says "Version 10.6" on it).Â
But it won't boot from that DVD.  The Apple logo stayed on the screen for seven minutes before I gave up.Â
Is that because this computer requires a later version of Snow Leopard?Â
What are my options for getting Snow Leopard onto this thing?Â
View 3 Replies
View Related
Oct 4, 2010
I'm currently using a MBP 13 inch and am running Leopard on it.
I just bought a copy of snow leopard today but i don't know if I should do a direct upgrade from leopard to snow leopard, or wipe my MBP and do a fresh install so i have snow leopard on a clean slate.
Have any of you tried the second option before? Or do any of you have advice on which path I should take?
View 8 Replies
View Related
Dec 20, 2009
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
View 5 Replies
View Related
Jun 5, 2012
I jsut did a fresh install. wanted to use my SL DVD but the MBP i5 refused to star with it so I used the original DVD (10.5) and upgraded with the SL DVD to 10.6. However after the initial SL Installation, it tried from the SL DVD and this failed. I did a manual restart, starting from the HD and everything ran fine. however today I note there is a locked file on the HD named Mac OS X Install Data. It contains 181 .pkg files.Now I suppose this should have been moved or deleted as part of the install process. Can I move them to a file where they belong?Â
Info:
MBP, MM, MBP - 10.6 + Windooz XP on a hard partition
View 4 Replies
View Related
Aug 31, 2009
What are these other two partitions that I have(bold)? I should only have 2 paritions, one for OS X and other for boot-camp.
Code:
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *298.1 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Macintosh HD 281.9 Gi disk0s2
3: Microsoft Basic Data BOOTCAMP 15.9 Gi disk0s3
Just curious, i was about to install snow leopard and i saw these...
View 1 Replies
View Related
Mar 15, 2012
There have been a lot of strange things happening with a Mac Pro (10.6.4) I was recently assigned at work. Multiple external drives have become unreadable (even when I try them on other computers) At this point, I'd like to basically wipe it and start over - to be as clean as possible. url...The only discs I can find at my company are MacBook Pro OS X Install DVDs. Can I use one to re-install OS X on the Mac Pro?
View 1 Replies
View Related
Apr 22, 2012
I have a Macbook Pro (2009), and I've tried installing Snow Leopard (after having Windows on it), and the install fails each and every time. Thought it was a bad DVD, so I borrowed my friend's and the same thing happens. Fails installing with the message that the Install failed. Linux (Linuxmint, Ubuntu, Fedora, and OpenSuSE) and Windows 7 install and run fine.Â
Info:
MacBook Pro, Windows 7, Want to get OS X back on my Macbook
View 4 Replies
View Related
Aug 24, 2014
I have just recently acquired a MacBookPro from a friend of mine who's father has passed away. I am able to access the computer without a password but the admin is still set to his father and he doesn't know the password. I have the Snow Leopard OS and want to do a clean install like it came from the factory with no personalization. I have owned a MacBookPro so I am unsure how to do a clean install of Snow Leopard over the exiting OS 10.5.8 and if I have to delete that OS first.
Info:
MacBook Pro, Mac OS X (10.5.8), Wanting to install OSX Snow Leopard
View 2 Replies
View Related
Feb 2, 2010
I have a MacBook 13" 2.0 GHz with 1 GB Ram and a 80GB harddrive 2006 model. This machine recognizes all ram, DVD, Hard Drive and ng usb etc. seems to work perfectly. BUT, it will only startup if I HOLD the PowerButton down all the way down until I see the the Apple Logo. If I just hit the powerbutton and go, it will t reboot over and over and over. I have bought new ram, nope. I tried a different HD, nope. I disconnected the DVD, nope. It simply won't boot properly. Once I HOLD down the power button to get it running it works fine, sees the camera, BT, WIFI, clock is at right time, all keys on KB work, and usb peripherials. I cannot reset the pram or vram at all, even while holding the power button down to boot. If I just hit the button and quickly press Command option p r it just reboots like always. Does anyone have any ideas??? I'm at a loss as it works fine once booted. While holding the power button to boot it I see my front led flashing and then hear the several beeps and it starts up just fine.
I have pulled the battery, removed the PSU, held the power button for a whole minute battery or power and let it sit overnight like this but nada, still does this.
View 1 Replies
View Related
