After cloning OSX leopard with SuperDuper, disk not rebootable. It reboots the original.I even tried SuperDuper repair permissions before cloning.
View 14 Replies
On my new MBP I fired and set-up the system, and SL was already installed.
I followed the procedure of cloning my Leopard HD on to a local back-up drive, using CCC, plugged it in to the MBP and booted from the clone.It has booted up without any noticeable issues but when I go to open Disk Utility, or any other program on the cloned disk, I get the '...application X quit unexpectedly' dialogue box
I have Western Digital Studio II (2x1TB, configured as 2TB). As I don't feel secure and wanted to make a backup of this HDD, I bought an identical HDD for backup.
Questions:
1) If I were to get a chance to start over, can I configure these two drives as a RAID cluster, so that whatever written on 1st disk, automatically mirrored to 2nd disk? Bear in mind, I'm using FW800 for both HDD in daisy-chained setup.
2) How reliable is RAID mirroring (software in leopard) using FW800 external drives, as it may subject to different 'connection/attachment' time to my iMac. Internal drives always on at the same time.
3) I tried to use CCC to clone the disk, the sustained speed is disappointingly at 30MB/sec read and write. If I did a copy from my internal HDD to external disk, I get easily 50-60 MB/sec.
I have a white macbook which I purchased in 2007 ( it is the version that only goes to 2MB of Ram total). In anycase I have a Hard Drive that i want switch into it. The question I have is there any benefit to just reinstalling a fresh copy of Leopard vs using a cloning software (SuperDuper or Carbon Copy)? Here is why I ask:
I cant remember ever defragging the current drive ( if that possibility even exists in Leopard.
I dont remember running any system tool like utility.
I have basically kept computer on ( or on sleep) for the time Ive used it. It is the best computer i have ever had. It is VERY low maintainance.
So with that said....does cloning copy over every characteristic ( an fragmented drive...slowness {of which none really exists}....or the time to launch the OS when it is rebooted)?
With all of this said, I dont use this computer for much storage. I have a couple of MP3s on there which can be ported off of there with a USB flash drive....and a couple of documents. Everything else is pretty much expendable.
I dont know...something tells me that its just better to freshly install the OS.
If I want to make a bootable clone of my boot drive onto an external FW hard drive which I can restore from if my internal boot drive becomes corrupted, do I need 3rd party software like Carbon Copy Cloner, or can I just create an image of the boot disk in Apple's Disk Utility and save that to the external FW hard drive?
Apart from incremental updating, what is the difference between these two methods in terms of being able to restore my computer to a previous state with all my applications installed? (I keep my data stored on a 2nd internal hard drive and am happy with manually backing this up to another external HD). So my reason for wanting to make a clone of my boot drive is so that I don't need to waste time re-installing all of my applications from DVD...
I'm planning of sending in my white macbook to AppleCare for a few repairs regarding the white casing (cracks) but do not want to send in my Western Digital 500GB Hard Drive.
I called AppleCare and they said they prefer it when you send in the original hard drive, for whatever reason they stated. My personal reason why I don't want to send in my 500GB Hard Drive is that I have a ton of files in there that are important and don't have another 300+ hard drive lying around to back everything up. Another reason is that my Leopard Family Pack disc I purchase years ago is at my parent's house in New York and I live in California, so getting it would be a huge hassle considering it's somewhere in boxes of storage and my folks are in Venice till the 15th of June.
Look, essentially what I'm freaking out over is that I've heard many cases that when you send in your computer to applecare, its not uncommon to get a macbook back with an erased hard drive.
I just don't wanna deal with the hassle. So am looking to avoid it altogether. Doing so bytaking out my 500GB HD and popping in the original 80GB HD that the Mac came with. I thought I had Leopard in there but when I put in the 80GB HD in the Macbook and turned on the Mac, a confused faced folder came on and turned off.
I want to send in my Macbook with the 80GB HD and that HD to have Leopard on it...so I decided to do the same method I used when I transferred everything from my 80GB HD to my 500GB HD when I first purchased it.
I used SuperDuper! application, free version...but it didn't work.
I set it up to "Copy: Mac HD to Untitled" (Untitled was the name of the 80GB since I erased it when I got my 500GB HD hoping to use it for Time Machine but never did)
I tried this twice, each time taking about 2 hours to transfer and copy to the untitled HD. I tried "back up all files" & "back up user files." But after this process was done and I popped in the untitled HD into the Mac I continued to get the same confused folder face..twice.
Any help on the matter is really appreciated as I'm highly considering not even sending my Macbook in with the 500GB HD to completely avoid any possible frustation if that HD was to magically erased.
I am trying to do clone the system only from my current hard drive to a smaller internal SSD. Tried with SuperDuper but the resulting drive was not bootable even though it had the system folder. Has anyone done this successfully?
View 3 Replies View RelatedI have today received my shiny new macbook pro - very excited!I currently have a macbook, and I previously upgraded the hard drive to 320 GB (same as the new Macbook Pro). What I wanted to do was just swap the hard drives - however when I put the macbook hard drive in the macbook pro it didnt boot. Pressing ALT on startup it sees the hard drive but just hangs (doesnt even show the apple sign).I dont have all the application disks so dont really want to start from a fresh install - I was thinking of cloning the disk with super duper, but that probably will have the same effect of swapping the disk!
View 2 Replies View RelatedI have a 250 GB disk in my MacBook Pro, and I would like to buy a bigger one (500 GB, probably). In my previous experience from the Windows environment, there was an application called Norton Ghost, in which you could easily clone the disk, and when the cloned one was inserted into your PC, the OS could not tell the difference. Is there something similar for the Mac OS X, so that I can replicate my hard drive and thus install the new one in my Macbook without any hassle? I know that Time Machine is a possibility, but after restoring my system through TM once, I found out that after the restore there were some minor additional steps that had to be taken; however, the cloning technique means that you plug your disk and you are ready to go, so this is what I am looking for. I have one more additional question: I currently use a 500 GB external firewire disk for Time Machine. Will its size be sufficient for backing up the new 500 GB drive?
View 7 Replies View RelatedHow should I go about cloning my noisy Maxtor 500 GB 7200 RPM to a newer quieter Western Digital 500 GB 7200 RPM?
View 5 Replies View RelatedI have a 2.16G (black) macbook that I will be upgrading to Snow Leopard. Since I've had the computer for over three years, I want to perform a clean installation of 10.6. I don't have a ton of files on my macbook and--apart from some large Garageband files--what I do have are relatively small (Word documents, Excel spreadsheets, music, photos) so I've always backed up by saving things to CDs/DVDs. Not the best plan, I know, which is why I recently purchased a Lacie 1TB external drive so that I can have a clone.
I would like to install OSX onto the external drive but I'm not sure how things should be sequenced. I've never partitioned a HD before; should this be performed first? How's this for a sequence:
1) partition the external HD first
2) install Snow Leopard onto the external HD
3) make the clone of my system and
4) do a clean install of Snow Leopard on my internal macbook HD
Does this make sense or is there a better way for me to approach this? Also, is there anything different I'd have to do to install the 10.6 on the external drive?
I've tried using the Leopard-appropriate version of CCC twice now for making a mirror of my MacBook Pro. The data is saved, yet the drive it's saved to is not bootable. I'm working with a friend who's used CCC with Tiger successfully in past. Are there any special tricks for getting CCC to make a bootable copy from a Leopard computer? The external drive I'm using is a LaCie d2 quadra, btw.
View 7 Replies View Relatedwhen i clone my mac book pro (snow leopard os) hard drive using SUPER DUPER, the cloned external drive doesn't match the mac hd in gigabytes. my mac hd is max 250 gigabytes, my external drive clone is max 320. however the mac hd reads as 233.71 gb used, and the cloned ext. drive reads as 216.54 gb copied. shouldn't a cloned drive be exactly the same size as the original drive (mac hd) that's being cloned?
View 4 Replies View RelatedI am trying to back up my 2 year old Mini (160GB drive, 90GB used, Core 2 Duo chip at 2.0GHz). I have used Carbon Copy Cloner but found that it is extremely slow (4+ hours) backing up my 90GB of used disk space to a disk image file on an USB hard drive.
View 24 Replies View RelatedI have searched the forum for a method of making a complete bootable clone of my hard disk. Just about every one seems to recommend CCC or Superduper!. From what I gather, after using either one of the programs, the system will boot, but no one has indicated whether all of the programs will still run. Since OS X is UNIX based, I was led to believe that programs are referenced to the original mounted disk they were installed on. Since the new disk cannot have the exact same name as any other mounted disk I will have to use a name other than Mackintosh HD to clone the original disk to the new one. I also have a concern that on my current boot disk is Windows XP running under parallels. Will these programs also copy the Windows partition (NTFS) as well?
View 2 Replies View RelatedThis is my first MBA so I am wondering about a backup strategy. On my iMac I use SuperDuper! and TimeMachine. On my MacBook I just use SuperDuper! I do not backup my MacBook as often as my iMac because most of my content creation is on the iMac. I am thinking of just using the same strategy as I currently use on my MacBook. What strategies are you using?
View 11 Replies View RelatedBefore I got rid of my SR MBP (2007 model) running Leopard in April, I used SuperDuper to create a clone backup on an external hard drive. Moreover, I used Time Machine to make a backup on an additional drive. When I got the MBP 2010 model (running Snow Leopard), I used migration assistant to move the stuffs originated from my SR MBP to the MBP 2010. It has been 2.5 months and things "seem" to be running fine. Is it ok to remove the backup made by Super Duper and use the drive for other purposes? (For example, clone the new MBP HD or use it to backup my PC, etc). Can you think of any situation that I should still keep the backup made by Super Duper?
View 4 Replies View RelatedI'd like to set up a backup strategy for my rev A MBA SSD. Can this be done with a 64gb usb flash drive?
View 4 Replies View RelatedI'm going to get an external drive to use with my MBP and Time Machine. I'm also going to store clone backups on an external drive that I'm going to keep away from my house. I'm planning on using SuperDuper for the clone backups. I'm going to have image backups of other Windows machines on that external drive as well. So, will I have to create a special partition for the Mac to store SuperDuper backups? Or can it save them to the same partition where I'm storing my Windows image backups?
View 6 Replies View RelatedRecently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
Information:
MacBook Pro
Mac OS X (10.5.8)
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
Running Disk Utility's Repair Disk function from DVD, how long should this take to complete with a 1 TB drive? It's been nearly 24 hours so far. I booted the computer from the DVD, and after verifying the disk was told the disk needed repair.
Info:
iMac G5, Mac OS X (10.4.3)
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies View RelatedI am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
I have an old Macbook via 2007 and I'm trying to update my operating system (currently OS 10.5.8) to Snow Leopard, but the disk is not reading in the disk drive. And unfortunately, Snow Leopard is only on a DVD, it can't be downloaded.I figure I have 2 choices:
1) take it in and spend $49 to have them do diagnostics and then tell me they probably need to replace the superdrive
2) I could buy an external optical drive. But I would need to know which one would be compatable with my old *** Macbook.
Info:
Macbook
please help tried everything dont have correct install disk but have macbook disk. utility cant repair.
Info:
iMac, Mac OS X (10.7)
Can I add and extra APP. to my backup cloned HD without affecting the boot-able properties.... I have just upgraded my bowser to opera 10.10 and cant bothered to re clone the whole thing.
View 5 Replies View RelatedI got a new hard drive and put it in an external enclosure. When i plug it in, i get a notice saying that the new device is not readable. what i'm trying to do is clone my old drive to the new one using SuperDuper, then take the new drive out of the external enclosure and put it in my macbook. someone told me i need to set up your new drive with Mac OS Extended (Journaled) with a GUID partition map scheme before you try to clone to it as clones don't work with the PC format/partition map that they normally come with new.
View 1 Replies View RelatedI have an ibook g4 1.33ghz (mid 05) laptop and have bout a bigger harddrive for it. I am in the process of cloning my hard drive. I have gotten as far as putting the clone on the new hard drive via a hard drive USB enclosure. I know now that g4's cannot boot from this kind of enclosure. So my question is if I were to just install the new hard drive into my ibook will it just boot up from that disk now or will it not work right?
View 9 Replies View Relatedi recently decided to dust off my old PC to play some of the games that I have been feeling nostalgic for and have run into a nit of a problem. One of the game discs is in pretty bad shape due to years of use and abuse and won't install the game. out of curiosity I threw the disc into my MPB's higher quality drive and it can see right through all the scratches and such. So I was wondering how to copy the old disc on to a fresh new one and have it still be usable by the old XP box.
View 8 Replies View Related
