I have an ibook g4 1.33ghz (mid 05) laptop and have bout a bigger harddrive for it. I am in the process of cloning my hard drive. I have gotten as far as putting the clone on the new hard drive via a hard drive USB enclosure. I know now that g4's cannot boot from this kind of enclosure. So my question is if I were to just install the new hard drive into my ibook will it just boot up from that disk now or will it not work right?
I have a Mac Pro from 2006, and it has hard drives in all four bays. The first drive is the 250gb default drive from Apple. The rest are Seagate and Samsung. The setup is: 250 (Mac) / 320 (Empty) / 750 (Backup) / 1000 (Media) The 250gb is getting full every once in a while, and I might wish to replace it with another 1000 or even the new seagate 1.5TB one. Whatever .. but since it only has the OS + Program files and some stuff in /home, I want to use the bigger drives for the data. And use the 320gb as the boot drive.
Move (clone) the 250gb to the 320gb Reboot and boot from the 320gb, replacing the 250gb. Which I can then make empty and use until I replace it with a 1000gb drive. I can use CCC to clone the 250gb to the 320gb. But is that enough? How can I then reboot and have the 320gb as if it was the 250gb,. And how can I be certain it is booting from the cloned 320gb, or the original 250gb once I am back into OSX? And can I then repartition the 250gb and still reboot, or will this ruin the master boot record or boot menu setup, etc?
I have no experience with this (yet). And am afraid to end up with a non booting system and a long night of trying to restore using the retail disk for leopard. I hope I am making sense. I just want to move my boot to the 320, and get more space for my boot hd.
I have a problem of a slow boot (3-4 minutes) with my MacBook Pro. Bought my first iMac 27" in December 2013 and going great. Decided to buy a 13" MacBook Pro retina with ssd in May and thought I would clone my iMac to the Pro. Before cloning Pro would boot up fast but after the clone it takes 3-4 minutes.
I want to do some upgrade things with my macbook and need to know if all is correct.My current internal hd is 80gb. I'm on 10.4.11. I plan on going to Snow Leopard but I want to keep my 10.4.11 system too to use. Almost 2 year old intel macbook.
I have superduper. I just got a new 500gb drive for the macbook. I also got a usb external 2.5" enclosure. I haven't done anything yet.What I want to do.... I want to partition the new hd into two. Probably 120gb to clone my current system on (with some room for growth) and the remainder to do a whole new fresh install + various applications of Snow Leopard.
Firstly, is it OK for me to have two separate OS's to boot from?
Secondly, cloning procedure.... should I take out my current hd and put it into the external enclosure, then put in the new hd, then boot from my former drive via usb and clone it onto the newly installed drive?
OR...put the new drive first into the enclosure, clone my system onto it, then switch out the drives? Does it matter which way?
Thirdly, since I'm not going to be doing any upgrading of my 10.4 system to SL....I'm leaving it intact as is.....and then doing a completely new install of SL....is there anything weird I should look out for. I dunno....my admin account...or not being able to have Logic installed more than once on the same machine...or anything else I should be aware of?
On my new MBP I fired and set-up the system, and SL was already installed. I followed the procedure of cloning my Leopard HD on to a local back-up drive, using CCC, plugged it in to the MBP and booted from the clone.It has booted up without any noticeable issues but when I go to open Disk Utility, or any other program on the cloned disk, I get the '...application X quit unexpectedly' dialogue box
I got a new hard drive and put it in an external enclosure. When i plug it in, i get a notice saying that the new device is not readable. what i'm trying to do is clone my old drive to the new one using SuperDuper, then take the new drive out of the external enclosure and put it in my macbook. someone told me i need to set up your new drive with Mac OS Extended (Journaled) with a GUID partition map scheme before you try to clone to it as clones don't work with the PC format/partition map that they normally come with new.
i recently decided to dust off my old PC to play some of the games that I have been feeling nostalgic for and have run into a nit of a problem. One of the game discs is in pretty bad shape due to years of use and abuse and won't install the game. out of curiosity I threw the disc into my MPB's higher quality drive and it can see right through all the scratches and such. So I was wondering how to copy the old disc on to a fresh new one and have it still be usable by the old XP box.
I recently transferred or am in the process of transferring my old info from a Mac Pro Tower to a new 2.8 i7 MBP. Previously, I had a 40GB SSD drive with my OS and Apps and it ran perfectly fine, however I needed more space. I ended up buying a Crucial M4 128GB SSD and upgraded the RAM to 16GB and have since had problems with the Crucial. I just now updated the firmware but that didn't seem to fix a thing.So what I've done is initialized the M4 SSD w/ Disk Utility via Mac OS Extended (Journaled) and I've done a clone using Time Machine (it worked but it was really slow and would occasionally lag for 30 seconds out of nowhere with a beach ball) and I've also done a clone using Carbon Copy and that was ridiculously slow (I would get a beach ball every 5-10 seconds and just opening a new window in the finder would cause a beach ball).
I don't know what could be the problem. I've since made a bootable SD card with both Leopard and Lion, thinking I'd just install a brand new OS onto the new SSD, but those aren't working for some reason.So yes, I'm currently using the previous and well-working 40GB SSD, but I'm lost Info: MacBook Pro, Mac OS X (10.6.8)
I am upgrading my MBP first gen unibody to an SSD drive. I just read that we should not clone an existing HDD to a SSD. The author did not give a reason why. So, my question is: will cloning my current HDD to a new SSD (using Super Duper) adversely affect the SSD performance? My initial plan for upgrading before reading this article was to clone my HDD to a new SSD in an enclosure (using Super Duper), then install the SSD. I thought this would save me a lot of effort restoring everything from scratch.
Is it possible to create a set of users accounts on one Mac and 'copy' them to another without having to do a full migration? I don't mean copying and pasting but using an application to clone them and place them on a target machine, if you know what I mean?
I want to clone my hard drive to use on my new one. i dont have an external hd enclosure, though, and would be happy if i didnt have to buy one. i was hoping i could make a clone onto my networked time capsule, then replace the hard drives and somehow boot from the clone from my time capsule.
what's the best way of cloning the hard drive? Since I have Snow Leopard, Windows, and Ubuntu on here, I could use Time Machine for SL, WinClone for Windows, and something else for Ubuntu. Is there anything that could make an exact copy of the hard drive (including the partitions)?
I am trying to do clone the system only from my current hard drive to a smaller internal SSD. Tried with SuperDuper but the resulting drive was not bootable even though it had the system folder. Has anyone done this successfully?
i need to clone and replace my internal hard drive. it's 150 GB and almost full, so I'm replacing it with a Seagate 500 GB so I can upgrade from Os x 10.4 to Snow Leopard, and generally have TONS more space
I'm attempting to do the cloning in Disk Utility- I've got the new internal hard drive connected via USB right now, however when i select it as the destination, the 'Restore' option remains greyed out...
I imagine I need to format my hard drive, however I impulsively clicked 'New Image' and it began creating a disk image of the new hard drive...
I have Western Digital Studio II (2x1TB, configured as 2TB). As I don't feel secure and wanted to make a backup of this HDD, I bought an identical HDD for backup.
1) If I were to get a chance to start over, can I configure these two drives as a RAID cluster, so that whatever written on 1st disk, automatically mirrored to 2nd disk? Bear in mind, I'm using FW800 for both HDD in daisy-chained setup.
2) How reliable is RAID mirroring (software in leopard) using FW800 external drives, as it may subject to different 'connection/attachment' time to my iMac. Internal drives always on at the same time.
3) I tried to use CCC to clone the disk, the sustained speed is disappointingly at 30MB/sec read and write. If I did a copy from my internal HDD to external disk, I get easily 50-60 MB/sec.
Quick question: I'm cloning/backing up my 250GB boot drive which has all my sys, apps and docs on it. I have a larger 320GB target drive to back up on. But I want to partition it up into 2 partitions. One for the boot clone and the other for other junk. When I go to disk utility it says the Total Capacity of my 250 is 238.1 GB. So, should I partition my target clone partition at say 240 GB (to get more out of the 2nd partition)(or is that inadequate when my source drive gets full up at a later date) or 250 GB or 256 GB (to be really safe)?
I'm using Carbon Copy Cloner and want to do a block level copy
My OS is 10.3.9 and I have my int. Hd cloned to a F/W ext. HD for back up. Normally I re-clone every month or two. Up until now when re cloning I've just thrown the old cloned Ext. HD into the trash, then empty, to make space for the new clone. This system "Seems" to work, as after a RAM crash, when looking for a solution I wiped the int. HD before I found it was a Ram problem. Finally I just replaced the RAM and rebooted from the Ext. HD then re-cloned back to the int HD. And everything is working fine. But now I'm wondering if just throwing the stuff into the trash is "politically correct?" If not, what is the correct procedure.
Pismo G3 10.3.9 // Iomega FireWire Ext. HD (partitioned) Clone app/ CCC
1) Have a bootable CD that only runs the backup program (OSX not running) 2) Create an image copy of my hard drive 3) Be able to browse through the image file when I am working in OSX so that I can pick out individual files if needed
This is how I use Acronis TruImage on my Windows systems. For whatever reason, I don't trust backups made while the operating system is running. Maybe this comes from my old days trying to backup servers with ArcServe and having to buy a special addon to help you backup open files. I think it's just cleaner if I run the backup from a "dos" environment. I think my Acronis TruImage disc boots PC-DOS and runs only the TruImage software.
i am getting a new replacement Imac from apple to replace my early 2008 24" 2.8 with a 2.93... I am a music producer with a ton of plugins as well as information that will take me days to reinstall... is there a way to clone the hard drive of my old imac to my new one so i dont have to reinstall all the software.. also by cloning do i have to reregister all my plugins
When I first got my Macbook Pro I cloned a 250Gb in the result of a major crash. Since then it has been sitting in a 2.5 enclosure in my drawer. I never imagined that I would use as my primary drive, it was just an afterthought. I wanted to switch to a larger drive and I was going to clone it to save time. Has anyone run into issues with a clone as their primary drive? In short is a cloned drive going perform the same as a fresh install?
Im going to be cloning My HDD in the near future, and Im going to be making a bootable clone. My one Question is whether or not my VM's will be cloned as well, and will be fully operational after the clone is complete?
OS X 10.6, 2 USB hard disks (magnetic, not SSDs), Data Rescue 3.
I used Data Rescue to clone a dying 120GB hard disk with a single partition to a healthy 500GB hard disk. The healthy disk now just reads as a 500GB hard disk with a SINGLE 120GB partition, as expected. I then aimed a deep scan at the 120GB PARTITION on the 500GB drive.
Question: Could the scan have picked up files that had been previously deleted on the healthy 500GB disk, WHICH WOULD CURRENTLY RESIDE OFF THE NEW RECOVERED PARTITION?
The reason I ask if because I don't want to mix files recovered from the dying hard disk with my own files that I previously may have had on the healthy 500GB disk.
Another quick question: are partitions continuous on a disk, or can they be on sectors physically scattered around the disk?
Time Machine, CCC, SuperDuper, etc. After my backup disk failed and I wiped all my previous time machine backups, I have been looking for a new backup/cloning utility to use for my production machine. Post your favorite backup/cloning software
I put a second hard drive in my Power Mac G4 Quicksilver 2002, and I decided to clone the old HDD to the new. The first time I tried it, it went on, never starting, just saying "calculating estimated time." In my foolishness, I closed the window, and ignored the warning. The second time I tried it, it went on for a good while, so I left it to it. When I came back the kernel panic screen was up. I restarted the computer, and checked the second HDD. It had about half of the Applications copied into it, so it was working initially. I booted with my install DVD, and ran disk utility and both disks were fine, no repairs needed.
This was the kernel panic info: Interval Since Last Panic Report: 25215 sec Panics Since Last Report: 1 Anonymous UUID: DBA4349C-EFC0-4AA9-83BD-CCE4AD0E89E3 Sun Apr 22 19:31:59 2012 Unresolved kernel trap(cpu 0): 0x300 - Data access .....
i'm cloning my mac hd (mac book pro, snow leopard) and though i've made successful clones, the sum of the hard drives (mac hd and external hd) don't match. for instance, my mac hd reads at: 233.71 GB, however the cloned external hd reads at: 216.54 GB. can anyone explain this discrepancy? are there certain things that don't go into the clone that are on the mac hd?
I just purchused a Hitachi 500GB Travelstar internal HD to replace the 250GB HD and I have a few questions about the directions on cloning. Do you need a FireWire or USB enclosure for the new drive? Do can you use disk utility or do you have to use a program like carbon copy cloner or super duper?