OS X Yosemite :: Flex Showing Up As Connected / Don't Have A Fitbit
Dec 8, 2014
Since Yosemite I've been leaving Bluetooth on (for Handoff), and I've noticed nearly every day that a device called "Flex" connects. After a quick Google search it seems to be a Fitbit. I don't have a Fitbit, but live in an apartment complex, so I assume it's one of my neighbors. I can disconnect it, but it keeps connecting again. I've never had a Fitbit, Is there any way I can block it from connecting?
Info:
MacBook Pro (Retina, Mid 2012), OS X Mountain Lion
My email messages for one Google account no longer show up in my OS X Mail client.Case info:This may have occurred after I enabled the 'All Mail' to Apple Mail for the account, then removed it once I saw it was adding every single message I deleted since the beginning of time. Still, that doesn't explain the following...My email messages for another Google account does show up in my OS X Mail client. They have exactly the same IMAP settings other than username and password.My email messages for the account that doesn't work, shows up fine on my iPhone/iOS and gmail.com.None of the messages in the inbox or folders/labels show up. The count is zero. However they all show up fine in folders in iOS and on gmail.com.There is an indicator for one new message in the inbox, but none show.
Info: MacBook Pro, OS X Yosemite (10.10.1), Mid-2010
I have installed the fitbit program a few weeks ago on my mac book pro and now i want to uninstall the program and i dont now how and i cant work out how to, as I am new to the mac books?
I just recently noticed on my Macbook (black rev. C 2.1ghz) that there is some slight flex where the palms rest to the left and right of the trackpad. This isn't a big deal, but what made me notice this was the fact that pressing down enough on the palm rests (either side) actually registers a click with the mouse.
I noticed when I was typing and some reason the words would get highlighted. After awhile I tried pressing down on the palm rest area and it would show a click on the screen. Anyone else have this issue? It's not happening all the time and there's not major flex but it happens.
It's not a big deal, but a bit annoying so far when I'm typing and it would either click somewhere else or highlight the word and delete what I'm typing. As of now I just lifted my wrists off the rest (which I should be doing anyway). If it matters I also have the MacAlly microfiber/felt laid over the palm rest. Makes me wish I had a unibody!
i have connected cable to tv but it is just showing (mac screen purple space stars picture if you know what i mean) on the hdtv as when you first turn your mac on. but my mac is working normal can use everything
I'm on Yosemite; on both my iMac and MB Pro, I can't put the computers to sleep when it's connected to the wi-fi; I have to turn the wi-fi off, and then it'll go to sleep. I'd like to be able to keep the internet connected when want to do this.
12 Months ago I bought an external hard drive WD My Book. After I download Yosemite, successfully, I have been getting messages that that my Time Machine was not backing up. When I open Time Machine I get a message Time Machine disc not connected. Also the Oldest Backup 28th Sept October 2013 - Latest Backup 28th October 2014. I have checked My Book and that is working OK. What is happening with Time Machine.
I usually connect my iPad as soon as I've heard the startup chimes, but since upgrading to Yosemite, whenever the iPad is connected, iPhoto opens. Usually, nothing will open until all my extension things like Dropbox are happy, but iPhoto somehow manages to kick off. Now, I don't like iPhoto. I don't understand it and it rarely does anything I want it to, so I don't often use it and I particularly do not want it to open, slowing up starting and serving no purpose.
OS 10.10.1 iMac 3.4 GHz Intel Core i7 Memory: 2 GB 1333 MHz DDR3 Model Name: iMac Model Identifier: iMac12,2 Processor Name: Intel Core i7 Processor Speed: 3.4 GHz Number of Processors: 1 Total Number of Cores: 4 L2 Cache (per Core): 256 KB L3 Cache: 8 MB Memory: 2 GB Boot ROM Version: IM121.0047.B1F SMC Version (system): 1.72f2
Info: iMac, OS X Mountain Lion (10.8.4), May only relate to Preview
I successfully installed OS 10.10.1 on my IMac (and it shows as being installed) however there is another line item that shows an available update for 10.10.1...how to get rid of the available update ... that is already installed?
I have been using Apple Calendar for quite some time but after I upgraded to Yosemite All day events does not show in the calendar any more. Other events in my calendar is showing.
Environment:
1: I'm on Macbook Pro Retina, running Yosemite 10.10.1
2: Calendar is version 8.0 (2026)
3: I am using Google Calendar, added as account to Calendar
Problem/Bug:
This has been working fine on Maverick until this upgrade and I think it is a bug in Calendar.
1. I tried to add an all day event from Calendar, using my Google account calendar
2. Event is saved, but once saved it isn't shown in Calendar.
3. When I login to my Google account calendar, the event I created just created is shown nicely there!
I then tried adding a new calendar using my iCloud account, but same thing happened:
1. I tried to add an all day event from Calendar, using my iCloud account calendar
2. Event is saved, but once saved it isn't shown in Calendar
3. I once again try, this time by logging into my iCloud account, the event I created just created is shown!
This is really weird and a major issue as all-day events are kind of important to see when you are planning and scheduling meetings.
One additional thing, I'm not sure if it is related, I have Time zone support turned on as I am working across multiple time zones.
Info: MacBook Pro with Retina display, OS X Yosemite (10.10.1)
Was activating FileVault on a new MacBook Pro until I received a message that it paused because it thinks the power adapter is not connected...even though it was. I unplugged the power adapter for about 12 seconds and then plugged it back in. But the error message persists. FileVault hasn't completed its process and not generated an encryption / recovery key. If I reboot do I risk being unable to access my Mac?
My MacBook Pro 13" (Mid 2010) doesn't go to sleep, when I close the lid or when I try to activate sleep under the Apple menu. I haven't changed nothing in the system preferences. I already tried the following: unplugged all USB devices plugged and unplugged external display closed all applications (except of Finder of course) resetted all energy saving preferences deactivated bluetooth checked share options (everything is deactivated)
Then I unplugged it from the power supply and after I closed the lid, it went to sleep. Then plugged in power supply again and sleep didn't work.
My notification pop up within os x is not displaying font correctly and instead showing font with this format "[A]" and don't know what to do. I have messaged apple.
Info: MacBook Pro with Retina display, OS X Yosemite (10.10.1)
There was one time where my wi-fi wasn't connecting so I tried to turn it back on. A window popped up but I had alrdy clicked enter before I read it, but it said something like "...will change settings, is that okay...?" And then wi-fi still would not connect. So I tried restarting my computer, but when it turned on, my user account did not show up and all there was on the screen was two boxes that asked for name and password. I was the only person using my macbook so I never set up a password for it.
I just converted a few of my Bluehost-hosted email accounts from POP to IMAP. These accounts and Apple Mail, itself, is on my hard drive (not in iCloud). For some reason, after about five minutes of sitting untouched in my Yosemite Apple Mail inbox, emails sent to these three addresses appear to be "read." The blue dots disappear, even though I haven't clicked on them. Seriously, they haven't been touched. That's not true of the email accounts I have with two other providers (CoreComm and GoDaddy) that I left as POP accounts. They stay marked as unread until I actually click on them. What could be causing this to happen?
New iMac and Yosemite -I can't get my Canon scanner to behave nicely. It's an 8800F. I have installed the latest Canon drivers (today) and MP-Navigator and I can at least scan OK. But I would like to be able to scan directly within applications (as I was able to on my old OSX 10.6 system), ie, by selecting the scanner as a device within the application.
But the scanner does not show as a device in applications, or within Image Capture.
Our internet provider just changed their email system from the Google partner program to something else. I made new accounts using the info that they provided and everything works well. It's just that my login information for the email account didn't automatically get entered into Keychain Access and I was wondering why. I have OS X 10.10 yosemite .
Info: MacBook Pro, OS X Yosemite (10.10), 17 in, 4GB
For some reason, the time of my events stopped showing in iCal. I get the event, but the time doesn't show unless I click on the event. The time does show in week view, but I prefer to use month view. This has not been an issue in the past, so I don't know what happened or if I clicked on something accidentally. I tried going to iCal preferences, but I don't see anything that allows me to select "show time in month view" which has been suggested by other usI'm using OS X Yosemite.
With a sharp fingernail I seem to have damages the internal ribbon cable that connects the audio card in my 2009 Mac Mini, and am looking to source a replacement, preferably in the EU. I'm currently in the UK.The part number is 922-8809.
A Google search reveals a few parts suppliers in Europeland, but they are all charging silly prices for the cable, and US suppliers impose ridiculously high postage charges.
I consider myself very good at all things Mac. But this one has me stumped.
I've just arrived home with a WD My Book Home Edition 1TB external drive. Formatted for Windows it mounted correctly via FireWire and USB.
First things first: I formatted it for the Mac... Mac OS Extended (Journaled), two GUID partition tables. So far so good. Each partition is recognized, each mounts like it should.
Time Machine then backed up my Intel iMac... again, everything's normal. No odd or unusual behavior.
Here's where things get strange.
For whatever reason I formatted the drive via USB. But my intention hereafter is to connect via FireWire... I need each USB port for peripherals.
But the drive isn't recognized through FireWire. I'm asked if I want to initialize it. When reconnected through USB the drive mounts again.
What's going on? Why is the drive recognized when connected via USB but not when connected via FireWire?
The little icon on the lower right corner of my XP partition shows that I am connected to my internet, and the connection is very strong. But when I open up Firefox or Steam or AIM, it all says I'm offline and asks if I would like to connect. I tried restarting, repairing the connection, and almost everything else I can think of.
I have a 13" MacBook Pro and it is not connecting to the internet! Airport says im connected to my internet connection, but safari won't load the internet. I tried Firefox and still, the same result. I resetted the modem and the router, but still nothing. The internet connection on my other computer works fine. So I got on the Windows partition and it connects to the internet! So it's just OSX that won't let me connect cause my Windows partition works fine.
I just plugged headphones into the headphone port on my iMac(dual core 2.4) I went to system preferences, sound, then output and only the internal speakers show up. I rebooted the machine and still, same thing.
I tried the same headphones on the eMac sitting next to it, and it worked just fine. Still confused about the iMac
I just connected my MacBook to an HDTV using the mini DVI -> DVI cable, and then the DVI -> HDMI cable, but I can't do anything from there. An input channel shows up on the TV, and then it displays my desktop picture (no icons), but I can't get anything else to show. I'm trying to play an .avi file stored on my hard drive.
So I am using Cisco VPN client, and when connected to the VPN network I get files but can no longer use the internet! I tried once to use macs built in VPN but there are options in Cisco that I didn't see on the mac version, and it did not work at all. I am using Cisco version 4.9.01, on a mac pro 10.5.6.
Ive been looking around the internet for a few hours now and can not find a thing that works. let me explain my set up. Im running a mac mini with the client version of 10.6 and I have a folder that I share with my friends to transfer files between each other. They Connect to it from there homes by command k and enter the ip address and prompts them to log in with the user name and password i gave them. now on my mac mini i have sharing only account for them to log in with everything works great except that i can not for the life of me find an way to see who is connect to the server. I just want an easy way to monitor what user is connect a list a log a widget something. It seems like such a easy thing but i cant find anything.
