OS X :: WindozeXP - Sudden Blank Screen On Bootcamp
Sep 26, 2009
I've been using a Windows partition with no problems at all. I started also using it via vmware and i would boot into win XP from both bootcamp and vmware without any problems. Suddently, one day, it was like the display drivers just stopped working... The mac would boot to the Bootscreen, and after i choose the windows partition the screen remains blank (not just black, theres no signal sent to the monitor). I can tell that windows are running fine on the background, i just can't see anything. 2 notes here: in the past, again all of a sudden, the windows logo just dissapeared, it was blank, but after that i was able to see my desktop and work on it. One more note, in the past, yes yet again without any reason, the keyboard stopped working while in the windows partition.... i discovered that i had some windows updates left and not installed, i installed them and it fixed the problem. Windows are so weird... Got bootcamp 2.1 drivers, the latest ati drivers for my graphics card (although i can't reinstall them from vmware because ati can't see my graphics card
To begin with, I own a MBP Intel Core Duo 2.0/2 Gigs of ram. I've had this laptop for roughly 18 months and do not have Applecare. I take extreme good care of all my stuff and still baby it till this day. I have NEVER bumped the laptop against anything, accidently dropped it too hard on the desk or anything similar along the lines. Essentially, looking new. About 2 days ago, I was working with my laptop and I closed the lid which made the computer go to sleep. Everything all normal & no appearance of anything! Around mid-night, I opened the MBP's lid to check my email. (Computer awakes, I can hear the Superdrive awake) then boom, a blank screen. The monitor did not turn on then burn out, it was always off. Similar to if you dim your monitor all the way. I can still see the desktop however, there is no light. If I take my flashlight and point it to the desktop, I can see everything. I called a few places, and they described it is the Inverter board or could be the fluorescent bulb that is damaged. My reasoning for the inverter board is faulty is because when a fluorescent bulb goes out it, it tends to flicker at first. Researching this forum, I noticed most MBP users LCD's that go out, they flicker but, mine just went out and I can still see the desktop. Where can I order the inverter board? I tried [URL] but they're out of stock. I will change the inverter board myself because it will be quicker and I need to use my laptop. It is currently hooked up to an external monitor until I can get this fixed.
All of the sudden my Mac Pro wont read blank CD-R's and blank DVD-R's. It will read burned disc and software just fine. I was burning with these same disc fine a few days ago.
I get this "This disc cannot be used because it is not recognized."
I tried rebooting with no luck! The only thing that I've done to my Mac lately is add a 1 TB External HD (Western Digital) to my mac through the 800 plug.
For some reason I don't have the screen at top of screen where I type www. whatever screen or the arrows to go back one screen. It use to be there all the time. I don't know what I did.Â
My Mac screen is weird. Yesterday my Mac was making beeping nosies <--fixed. But today when I turn on my Mac the screen is divided by two... And it also has like weird lines all over the screen. I put in my pass word and the screen all of sudden just the screen is divided by two
My bootable drive is a JBOD (concatenated array) of two internal disks. Therefore I cannot use Bootcamp. I have placed a third blank drive in the third hard drive bay. I have my download of the Windows 7 beta, which I burned to a bootable disk using Disk Utility (.cdr file). Now, might any of you in the audience be able to inform me of what I should do to get the Windows OS from the bootable disk onto the completely blank internal drive?
I am on a brand new 3.06 GHz iMac. Installed Snow Leopard, 10.6.1. In general I don't experience any of the problems other people seem to have. But twice now my screen has turned blue while I am in the middle of something. All the open apps disappear and the Finder seems to relaunch. It only takes a few seconds. I don't have steps to reproduce it. Both times I had several apps open and had video/DVD running in the background.
Has anybody seen this?
I am a notorious file-saver which means I haven't lost much work through this but if it keeps happening I might have to go back to Leopard.
I don't know if it depends by a latest update I did to Itunes but after an uncertain amount of time my MacBook Pro 2.2Ghz Santa Rosa start to flicker. I have posted a video in youtube [URL] so you can see what happend. For a small amount of time while flickering is started the mouse can move around then it stuck and lock me out of the system. I have to reset many time PVRAM and SMC then it will restart until it lock it down again. It worked flawlessly until yesterday after if I don't remember wrong one or more software update. I use Snow Leopard (official licence). I downloaded the Combo Update for Snow Leopard and ran it. I still have to test it again. Since I need to do some work in the next 48 hours I can't full test it. After the hard reset an image pop out and It won't let me start up the system again ever if I reset many times PVRAM and SMC Then I use bootcamp to "unlock" the MBP. I do run windows under BootCamp. It will run but I can't see anything since the video remain black (I hear the HDD until stop working) Then I push the power down button and I turn off the windows Then after a long time it will log into Snow Leopard! I'm getting crazy the last two days
I have been experiencing a problem lately. Once a while my MBP '10 screen will have a sudden drop of brightness and then back to normal. Does anyone have similar problem?
My Macbook Pro display all of a sudden went to the 'white screen of death' as I've heard others refer to it as. I've tried zapping PRAM, resetting SMC etc. to no avail. When I connect an external monitor, I am able to use the Macbook without problem, so I know it is video card/controller/display related issue. I'm going to send the Mac in for repairs. But before doing so, I'd like to erase my hard drive so I'm not sending them all of my data with the computer. I've done a time machine backup, so all is fine there as well.Â
My problem, is that in order to erase the hard drive, I need to boot from the OSX install disk. No matter what I try, I can't do this with my external display. If I insert the disk, and hold down the C, my Mac never recognizes the external display plugged in and so I cannot see to get to the disk utility tools on my OSX install disk. I've tried using Command-display dim button, to no avail.Â
I've tried simulating a clamshell mode boot where I close the lid as soon as the boot starts (with the OSX install disk in the drive) and I get a kernel panic every time. Even if I didn't, I don't see how I can close the lid at startup and hold down the C key at the same time. Â
I have faced some known symptoms of a problem for which I was not able to find any sound resolution. I have an account with which I am unable to login. When I enter login details for a session, the system immediately kicks me out showing a blue screen, logs out and goes back to the login window. An interesting observation during a sudden logout is that I spotted a vague image or window of an open application (probably Finder) at the background which is like 95% transparent in comparison to the Mac's desktop and therefore barely visible. The white-ish edges of that window is more distingushable though for a short duration.Â
I can ssh to this username and work remotely. But there is another username which has not been affected with this issue and works fine. The console logs show that loginwindow process is crashing everytime. Look at the output below. There have been notes with similar effects but with specific causes (e.g. MS Excel 2004 inc Rosetta, Blootooth peripherials, eBook Studio, Photoshop CS3 etc.) which might be related cases.
[URL]
I have already tried booting in Safe Mode, deleting loginwindow.plist without success.
Process:Â Â Â Â Â Â Â Â loginwindow [52] Path:Â Â Â Â Â Â Â Â Â Â Â /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow Identifier:Â Â Â Â Â loginwindow Version:Â Â Â Â Â Â Â Â ??? (???)
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
When finished, I normally put my mac into standby mode instead of turning the power off. Last night, I did the same. When I tried to power on today it seems like my mac is working (the buttons beep when pressed and hear the hardrive), however, the screen is blank (never turned on). I believe if I can actually turn my mac off and on again it may fix it, however, I have already tried taking the battery out and putting back in to no avail and I think everytime I try by pressing the power button it goes into standby mode. Is there a way i can force my mac to turn off instead of going into stanby mode by pressing certain buttons since I can't see the screen?
Got this mac friday but haven't really played with it before yesterday. My problem is:
1) Yesterday I went for logging in to facebook, but suddenly the screen went green? Had to close the mac down and start it again. 2) After I had turned it on and was on the desktop the screen (with me doing nothing) went white, and I had to do the same again. 3) This morning when I wanted to turn the mac on, it wouldn't! But few hours later I tried again and there I could turn it on by pressing esc + start button.
Should I call for a replacement? (Already had two - 1 with dead pixel and 1 with creaking).
I was using it in my bedroom, it was plugged in. I went to make some food, and upon my return I am greeted by a blank screen, probably just a hiccup right? So I held the power button down expecting it to spring back in to life. But it didn't. It wouldn't turn back on. At all. Luckily, I thought, I have my old 2006 Macbook that I keep as a back up just for times like this. As it hasn't been turned on for a while, the low battery warning comes on, so I plug it in. 10 seconds later, it hibernates. I switch it back on, but it keeps hibernating for no good reason. So I think restarting it will solve the problem. It didn't. It too, now wouldn't turn back on. At all.
In the space of a few minutes, they both completely died. I've tried resetting SMC, PRAM, everything I've found on Apple's support page and forums like this. Nothing has worked. The light on the power cable glows orange when plugged in, so it is still charging, and the battery indicator lights on the side of the MBP work fine. Aside from that, they are both completely lifeless...........
I've got a 15in aluminium powerbook, a couple of years old. So far I've had nearly everything go wrong with it. replaced screen, knackered hd, ram port failiure, and a battery that lasts 10 minutes.
I recently replaced the harddrive, as the standard issue one packed up a few times. I followed the instructions on ifixit.com website. To my delight I actually managed to do it, and the pb worked well for a few weeks. Then suddenly, the screen froze and faded to white. So far I've tried everything -
Resetting the pmu. Resetting the pram and nvram. Opened it up to check I reconnected everything. and checked to see if the hd is still working starting it up from another computer, and it works fine. Everythings still there. Someone also said if you hold 'R' key down on start up it resets the lcd. BUT STILL BLANK!!!!!!!!!
The screen still seems to turn black after a little while, indicating the energy saver is still on. I'm thinking I may have dislodged an lcd connection or something?
I have a problem with my mini/quicktime setup and i was hoping for some help from you all at macrumors...
Here is the setup
This system is setup for a admissions office in which we have a mac mini set up to a LCD screen that is all mounted on a wall.
we have the mini on timer to come on from 1230-5pm and when the mini comes on, quicktime is set to automatically open and play the admissions video.
Now here is the problem:
when I turn on the LCD every day, the screen is blank but Ican still hear the video, I figured it was in hibernation so i move the mouse and hit the keyboard and nothing. i need to push the power button and hold it for a couple seconds then the movie comes on but the video is choppy.
here are the specs on the mini: 1.25 power pc G4, 512 Ram.
its old but its only function is to play this video...
when I turn on my computer there is a blank screen. You can still hear the normal noises coming from the computer like any normal boot-up. But if I let my computer sit for a while without turning it on, it will turn on with weird almost static noises. If I force shut down then try again, I get the normal boot-up noises. I tried the safe boot-up method,holding down the shift button while turning the computer on, but no dice. I actually tried this method on both the good and static noise boot-up.
Yesterday I was working with my MBP in one of my client's office and the computer went blank. The screen turn to black and it was still ON. I had to press the ON/OFF button to shut the computer.
I am trying to set up boot camp on my new mac mini. The primary reason is that 10.6 intel macs don't support my version of mac photoshop (Photoshop 7). I have an XP version of photoshop installed on my old laptop, and want to boot XP on my mac and move it over. However, when I tried to install Boot Camp, and re-started with the windows CD in from Boot Camp, I had a gray screen for a bit, then a blank screen.
I have a brand new Mac Mini, with OS X 10.6, and I set up the boot camp partition successfully. My windows CD is XP with SP2 as apple claims is required.
Additionally, I have an external hard drive with a .bkf file on it from a backup of my old PC laptop that has photoshop in it, but I can't extract that to my BOOTCAMP drive, at least without windows already installed on it.
I tried some other windows CD's, and a windows DVD that are supposed to be bootable borrowed from friends, using the boot camp application, with the CD in, at least XP SP 2, and I still got a blank screen as it re-started, and thus have been unable to install windows.
Is there another way I could install windows? Perhaps from my .BKF file? Is there something I might be doing wrong? I do have an older monitor, a viewsonic 17 inch, and I'm using an apple adapter. Could it be that windows install CD's don't support my graphics card? If so, how am I supposed to install windows? Also, my keyboard doesn't seem to be recognized either. It is a macally ikey extended keyboard, and I can't even get the caps lock light to turn on while it is trying to load of the windows XP disk with boot camp.
Not even a week old!! Computer was asleep for about 2 days, woke it up the same way with a few taps on the keyboard and it just started to beep. Tried to turn it off but nothing. Nothing on the screen, just beeping. Pushed the power button and beeping. Unplugged it and waited 5 minutes and pushed power button and beeping with nothing on screen. Its sunday and it hurts my stomach to think about the lengthy process this will be to get a new one or get it fixed. My wife says to call, but I tell her that if there even isn't anything on the screen then what can they do over the phone. Is it possible the memory went bad. What would cause this? Its plugged in a power strip.
I need your opinions; since the 10.6.3 update my iMac has begun to freeze to a blank screen. I think this may be a sign of a dying logic board, however I question this as I don't have the freezing problem with 10.6.2. Picture of blank screen attached.
My Mac Pro arrived today and of the six or so times I've restarted this has happened three times:
I get the normal grey Apple logo screen then as it switches to the login screen the screen goes black. The monitor doesn't go into sleep mode, it thinks its getting a signal. If I hit the power button and put the Mac to sleep then wake it up the login screen appears.
I had a power outage while the computer was running, and now whenever I try to login as my admin, after the password part it just goes light blue. Full screen blank out. I can use my non-admin accounts and use the admin password to change permissions.
I have a MAC IBook (800 MHz 32VRAM) ibook and when I turned it on this morning I got a blank screen. I tried turning it off and on several times to no avail. I know the computer is on because when I touch the sound button (F5) I could hear the noise, but I have just a blank screen. I am assuming its a monitor problem or did I touch a function(s) key by mistake and it blanked the screen.
I'm trying to upgrade to LION to move to iCloud...the folks at the genius bar recommended that I go from 2gb ram to 4. They gave me the website to purchase the memory and told me how to load it. Prior to loading, I shutdown the computer and unplugged it. I then removed the 2 1 gb cards and replaced with 2gb cards. The loading seems to have gone fine, but all I get is a power light on the front of the case and a sound that makes me think it's running....the screen is totallly black though.
