My iMac will only print in black and white. I can't find any setting to fix the problem. I know it's a computer problem because I have hooked the iMac up to more than one color printer but only prints in black and white. Where else can I look?
View 7 RepliesAt first I thought it was my printer, but come to find out, it is my macbook.It cannot print in color
Info:MacBook, Mac OS X (10.6.8)
I recently upgraded to Snow Leopard and now my printer won't print color...everything comes out grayscale. What gives?
I have an HP 5850 connected via ethernet and on a router. Worked fine in 10.5
Program doesn't matter. Web, Word, Photoshop, Illustrator..
What setting do I need to change to print in color on a color printer - everything is printing B/W?
Info:
MacBook Pro, Mac OS X (10.6.8)
I have an HP Laserjet 1525nw. When I try to print any PDF that has color, in the print preview, the page(s) is white. If I go ahead and print, it will print a blank page. Black and white will print fine. My printer is very low on color ink but full on black. If anything, shouldn't it default to grayscale for color. My windows computer uses the same printer but will print anything.
View 2 Replies View RelatedEpson 835 is only printing in B&W since I updated to yosemite. I recently did the update as well.
Info:
MacBook Air, OS X Yosemite (10.10.1), can't print in color
All software/firmware/drivers are up to date. I restarted my imac and the printer with no luck. Even the "clean print heads" feature only comes out in black.
p.s. All my inks are quite full.
Info:
iMac, Mac OS X (10.7.3), mobile me, Time Capsule
I currently have the Lion OS X working on my MacBook Pro and a HP Deskjet F4180 and I can't print in color. What changes do I need to make to enable this feature
Info:
MacBookPro, Mac OS X (10.7.3), Printer worked fine on Snow Leopard
My hp printers will only print b+w over my network. My 9650 is too old I guess there are no drivers from hp but my 6980 has lion drivers.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
My HP printer won't print in color on my iMac 10.6.8
Info:iMac, Mac OS X (10.6.8)
I cannot install the Canon LBP 5000 laser color print on Mac OS LIOX.
Info:
iMac, Mac OS X (10.7.1)
before switching to Mac, I used an "X-Rite Eye One Display 2" color meter device with software. You can find them most places like Amazon for about $150. The device should still work, but I can't find any software for it for the Mac. After going to the X-Rite web site, I could find no software at all for the Mac as it is only windows based.
Surely someone out there has used a color meter such as this one as they are quite popular especially for graphics artists that use professional graphic monitors. I am hoping someone can tell me how to use my color meter (USB), what software for Mac Leopard I need and how to save the color profile in the Mac OS.
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.
I have an 09 Mac Pro Nehalem, with nvida gt120 graphics card running 10.6.2 with the latest mac pro 1.4 efi and two 23 inch Apple cinema displays (the older DVI kind)
I go into system preferences>displays>color and try to adjust color on my monitors but selecting different color settings on either monitor only affects ONE monitor, the other monitor is essentially stuck at whatever color setting it is set to.
When starting the iMac in the mornings, the upper strip of the desktop appears in the screen color instead of white. What could this be?
Info:
iMac, OS X Mountain Lion (10.8.2)
i really want to customize my macbook. i want to change the color logo to apple classic color. (but not for a while) the main thing i want to do is something like this [URL] the second picture to last. the guy with a suit and a hat, being covered with the apple logo. i want something like that, only not that image. you get the idea though. where can i get something like this? are they stickers as well? or are they laser engraved? i do not want it permanent on my macbook, since i get easily bored with the same look
View 3 Replies View RelatedI installed iwork 08 and everytime i type the letters come in white. I tried changing the color font and everytime i try putting black it always comes up white but when i do it dark blue for example it shows dark blue, it shows every color except for black.
View 2 Replies View RelatedIs there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies View RelatedWhen I print multiple checks they print in the wrong sequence. If I have checks 401, 402 and 403 in the printer in that order, they print 403, 402 and 401. How can I change this to print not collated?
Info:
Mac Pro, Mac OS X (10.7.4)
I'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
I have had difficulty in attaching my HP Photosmart C5580 printer to my new MacBookPro (OSX 10.6) through my Netgear WGPS606 print server. After much searching I found previous posts here which advised me to add the Gutenprint driver 5.2.6 which I did. That finally DID successfully attach the printer through the server.
However, there is a lag of many seconds (sometimes minutes) between the SEND command and the starting of the printer. Is this the new normal that I need to expect or is there a fix?
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies View RelatedThe Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
i'm trying to print some stuff off using adobe and some parts are printing, but some aren't. I've had this problem before i would print of some formula sheets for my finance class and basically if it wasn't a letter it wouldn't print it off but now it's taking out a lot more.
in the first picture you can see how i went through and wrote the stuff in, wasn't that big of a deal.
second picture is one page from the file that printed out fine
third picture, the entire top part is supposed to have a paragraph on it.
I have a 2GHz unibody Macbook. I don't know how to figure out my color profile but I thought this a bit.
I compared my color to my friend's iMac and I noticed his colors were more bright and deep. Is there any way I can upload another color profile and make it look better?
Is there any thing available that will allow me to print to a PDF file? I'm trying to export something to a PDF file that does not have the feature as standard. I know it can be done in Windows as there are a few Print to PDF applications. but I can't find a Mac one.
View 2 Replies View RelatedAs a new Mac user, I'm not quite sure what these do, or effectively how to use them. I've noticed them in Ubuntu 9.04 too. What benefit do they offer to organization?
View 1 Replies View Relatedfor only one user on the system, the colour scheme has gone negative. Backgrounds, files, programs, etc. have all been affected. I can't find anywhere that would have this effect - it's not in system preferences or anything like. How can I fix this?
View 2 Replies View Related