Mac Pro :: Vista Boot Camp Software Raid?
May 9, 2008
I'd like to set up a separate 3-drive striped software Raid0 solution in Vista to increase write performance for FRAPS capturing, but need guidance on how to proceed.
Mac Pro 8-core 2.8GHz "Early 2008" 14GB RAM WD 640GB x4
Drive1 - Mac OS 10.5.2 / Windows Vista Home Premium 64-bit (Boot Camp 2.1)
Drive2 - Striped Raid0 1/3
Drive3 - Striped Raid0 2/3
Drive4 - Striped Raid0 3/3
The 3 latter drives is what I'm trying to configure, but don't know how to do so for my Vista partition. Is this even possible? If so, does Vista have this built-in capability, or would I need to download a third-party software raid utility?
View 8 Replies
ADVERTISEMENT
Dec 25, 2008
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
View 4 Replies
View Related
Feb 19, 2010
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies
View Related
Jun 23, 2009
Can anyone please suggest a RAID card for a MAC Pro that will also let me get into Boot Camp.
I have a Rocketraid 2644 connected to an external box with a RAID 0 array but it forces me to boot into OS X and nothing else
View 7 Replies
View Related
Jun 5, 2010
Can you just install a vanilla PC raid card into a MP, stripe a few empty drives in a RAID 0 config, and make OS X ignore both the RAID card and the NTFS striped drives when switching to and from Leopard?
View 20 Replies
View Related
Jul 10, 2008
Can vista 64 bit use all 8 cores of the mac pro when running under boot camp? And can you set how many cores vista uses if running under vm ware? Looking at getting one end of the year but need performance on windows still.
View 14 Replies
View Related
Nov 19, 2008
I have recently installed a version of Vista on my Macbook to use an online test-taking software that my university insists on using. Everything seems to work well. I set the default partition to OS X and can easily get into Vista if I need to (which fortunately isn't very often).
However, today I noticed an issue that is annoying. When I open Vista, the time is off by about 6 hours. It's set to Central time (where I live) and everything seems fine, but is just off by 6 hours. I didn't think anything of it, so I changed the clock to the correct time.
Then when I was finished using Windows, I restarted back into OS X and everything seemed flawless. Everything was working exactly as I left it. However, after a few minutes I noticed the clock in OS X was off by exactly the same amount I had to change it in Windows.
How could this be? I thought that by partitioning my hard drive I was unable to access the portion I am not currently using. For example, I can't save a file to the Window portion of my hard drive when using OS X. Likewise, I can't access Word files, photos, or anything on my OS X portion of my hard drive when using Windows.
How is it that when I change the time in Windows it changes it in OS X? And why are they different? Not this is a huge problem, but just a pain in the a**, and a little discomforting.
View 10 Replies
View Related
Apr 18, 2009
I'm trying to install Windows Vista Home Premium using Boot Camp on my MacBook Pro 15". I partition the Mac HD and I gave myself plenty of space on the Windows partition (52 GB) because I want to install large games on it.
When it comes to installing Vista I insert the DVD and click 'start installation'. It looks like it's going to work for a few seconds then it says that it can't recognize the DVD and the disc just ejects itself.
I tried to partition the HD then restart and hold down the 'C' key to boot from the DVD. The same thing happened, the disc just ejects itself...
get Vista installed? Will I have the same problems trying to install XP because if not then I will just install that. I would prefer Vista because of the DX10 compatibility for Crysis.
View 4 Replies
View Related
Feb 6, 2010
there i have a macbook pro and i have recently installed windows vista 32 on it using boot camp. also recently i have updated boot camp to 3.1 and my sound seems to have stopped working.
Although the red light in my headphone jack is gone my speaker icon on the right hand corner has a x on it and i cannot hear anyhting now. i have cheaked my sound driver and it is up to date cirrus logic cirrus logic cs4206a
View 11 Replies
View Related
Apr 15, 2010
So I installed Vista and then popped in the OS X Disc 1 to install the drivers, like I did with Win XP before. All I get on screen is the window where I get to choose whether to install OS X on my MBAir or install disc sharing....no drivers.
Do i need a specific version of Vista to be able to install boot camp drivers ? SP1 or SP2 maybe ?
I remember I had the same issue with Win XP SP3, which seemed weird since it's supposed to be even more complete then the previous version, right ?
View 1 Replies
View Related
Mar 8, 2010
I've been looking at the Mac Mini server for my next computer purchase, but I've had a few things confuse about the set up. I've seen at least one thread where someone got their Mini server to use RAID 1 settings on the dual internal drive set up.
What I want to know is will a RAID 1 configuration play nice with Boot Camp?
Is it even possible to use boot camp on a RAID 1 configuration?and if it is possible, would the RAID 1 duplicate the Bootcamp Partition too?
These are three important questions because I like the idea of the RAID 1 security and because I'll be pairing it with a Blu-ray drive I'd most likely have to install Windows via Boot Camp to watch them.
View 2 Replies
View Related
Feb 24, 2008
I am currently in the process of selling my gaming pc, in order to buy a mac pro. My old system was an intel core 2 quad, 4GB PC2-6400 low latency, and an 8800 GTX. I've had a macbook for about 18 months now, and i will never go back, hence my recent idea to move my desktop computing to the mac pro. However i am concerned about graphics power in gaming on OS X and on boot camp Vista/XP.
I am looking for some advice on what you think the best solution might be, and whether you think the 2 x 2600XT's will be powerful enough for the recent game s in the market (Crysis, COD4:MW). Also wondering if it is possible to use upgrade the mac pro to an 8800 gtx myself, and whether the 2 x 2600XT's needs just simply uses crossfire drivers on bootcamp windows. I am assuming the motherboard does not have an SLi controller, hence the lack of 2 x 8800GT's.
View 7 Replies
View Related
Mar 9, 2008
I just got Vista Ultimate x64 running under Boot Camp (under 10.5.2) and want to improve the graphics. FYI - sees my 16 GB RAM, network, and sound card, but not any of the drives on my MacPro (any thoughts on that?) Can I install the NVidia Windows Vista 64x bit drivers while running Vista under Boot Camp?
View 5 Replies
View Related
Jan 25, 2009
I've been reading up on ways to install Leopard from an external HDD image (.dmg), and I'm wondering if it is possible to do a similar function, but with Vista in boot camp. I'd like to backup both installers to an external HDD and make them mountable if the disks have a snafu.
Can you install Vista from an external HDD via Boot Camp? I imagine this would be an .iso or similar file type.
View 1 Replies
View Related
Mar 24, 2009
I was wondering if you can play Windows only game on a mac if you use -Windows Vista, Boot Camp(To install Vista) Then after you do that go to Vista side of you mac. And then install a windows only game onto it with a game CD OR download a torrent for windows on the windows side.
View 3 Replies
View Related
Mar 29, 2009
I just installed Windows Vista x64 on my 2.4Ghz Unibody Macbook this morning for some software development, and I accidently left my install DVD at home - I'm at college right now. Is there any site I can download the drivers for from? Or could somebody possibly send me a link to a download? I tried the 2.1 download on Apple's website, but it doesn't start up.
View 8 Replies
View Related
Jun 21, 2009
I'm trying to run Boot Camp Vista through Parallels but i don't know how to set it up and can't find a guide anywhere. There's one in the settings but that skips over the most complicated bits. Anybody know of a guide for doing this or know how to do this?
View 13 Replies
View Related
Aug 14, 2009
Everything seems to be working well except there is no sound from speakers on the Vista side. Still OK on Mac (of course).
I have iMac 3.06gHz
Checked that sound is not muted etc.
It does seem to have two volume controls (Vista) in the dock? One Realtek and one Mixer. Neither are muted. Device Manager says all is ok and running latest software.
One other small matter is that I can't seem to load a network adapter. It finds new hardware everytime I open but can't find any software and as I don't know what I'm looking for I am sort of stuck.
View 6 Replies
View Related
Jan 3, 2010
in an effort to load windows vista into my machine I partitioned my harddrive and put the windows installer into my machine. When I didn't have enough space to load (partitioned 5gbs, needed 6.9 or something) I was unable to remove the disk from the drive for 30 minutes! I looked up these types of forums and couldn't find a solution.
View 1 Replies
View Related
Feb 2, 2009
I've had a Vista 32 PC and it booted pretty fast. I now have a fully loaded iMac (newest one available) and Vista takes abnormally long to start. OS X boots very fast, and once Vista is loaded, it runs normal, no problems. I'm just wondering if there is a way to reduce the boot time, and why it would take longer to boot on this more powerful computer than my last generic PC, or if that's just a drawback of boot camp.
View 6 Replies
View Related
Dec 11, 2010
I tried to install Windows Vista (64bit) using Boot Camp. I get to the window where you select the disk partition you want to install Windows on, and there aren't any options. How can I get the newly created partition (the one I made with Boot Camp Setup Assistant before restarting) to show up on that list? Or, where do I find the "driver" that it requests instead?
View 12 Replies
View Related
Aug 6, 2008
I downloaded the 2.1 update for Vista and when i try to open the .exe in Vista i say agree to let the program open and then it just doesn't do anything.
View 20 Replies
View Related
Jun 29, 2010
i'm a HUGE gamer, so the first thing I did once I loaded this new computer up was install my copy of Windows Vista on it using Boot Camp Assistant. The installation went completely smoothly, so I then proceeded to install the Boot Camp Drivers onto my new and fresh and clean Windows Installation.
I restarted the computer and everything seemed to be in working order...but there are two relatively MAJOR problems:
One, the one that is the most pressing, is the sound. When I started up after installing all of the boot camp drivers, I couldn't get a single audio device to get recognized by my Vista Home Premium installation. I tried disabling and re-disabling other drivers in the Device Manager, and when I try to download new drivers for the one audio device that has an error sign next to it, Vista claims that it is already updated to the latest drivers, so it will not install new ones. I even went onto cirrus' website to download their official drivers, and the same thing happened.
View 4 Replies
View Related
May 22, 2010
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
View 4 Replies
View Related
Apr 10, 2009
I was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
View 5 Replies
View Related
Oct 9, 2009
I've installed the drivers, and when I start up in Windows, neither the internet or the wireless pick up.
Using Windows Vista Home Premium. The little wireless icon in the tray just has the big X, so it's literally picking up nothing. I also can't connect via ethernet.
View 6 Replies
View Related
Nov 21, 2010
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
View 7 Replies
View Related
Sep 11, 2010
Looking for some specific but simple advice on buying a raid. If you could teach or share your thoughts, but fair warning I am not a tech and get easily confused. But seriously, port multipliers, pci card bottle necks, quad eSata ports, enclosures with raid and esata interface, pci-x? raid and port multipliers, hardware/software raids? What cables go where.
My specific needs and specs:
I am looking for a fast drive configuration for use with my Intel 2008 macPro (Haprertown) OS: osx and windows vista.
Needs to be compatible with both operating platforms.
External solution please, the raid will be used with one box and will not need to be shared with other computers.
Used for Video editing and high-resolution image sequence playback.
I am looking to reach up to 300mbs if I have the budget, but that speed requirement might be too expensive for me, I am not sure?
No redundancy or security required, everything is non critical.
I will only need to run Raid 0
I do not want to do internal storage.
To help with cost, I can get away with 250-500gigs, as space is not necessary. Think, speed, speed, speed.
Price, Can I do this for $450?
The homework I have done thus far:
The SSD drives are perfect for me but the price point is a little pricy when I can do similar speeds for less cash. Unfortunately I have ruled out SSDs. I think I am going the way of an eSata raid, just don't know how to configure something close to 300mbs? Do I do a pci raid card? Do I build a raid and buy a card? External, High speed Raid 0, no redundancy,(300mbs). Low storage capacity (to drive down cost for me if it is relevant?) Compatible with my Intel mac pro OSX Harpertown dual quad. Disk solution can be formatted to be used for either OS (vista or osx).
View 18 Replies
View Related
Jan 25, 2009
I decided that I couldn't wait for Gainestown and ordered a 2.8x8 MP today. I'm going to get another 8GB of RAM (I assume 10GB in matched pairs will still perform at full speed). My real dilemma is a Boot/Storage solution-I'm moving from a Dual 867 G4, so all my current drives, both internal and external are IDE, which basically means I'm starting over as far as internal drives goes. The G4 power supply gave out so I'm getting this external enclosure to put my old drives into for file recovery. As far as new drives go, I can't figure out what to do. I'll spare you my million iterations of drive configs I've sketched over the past two days.
View 14 Replies
View Related
Oct 13, 2010
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
View 8 Replies
View Related
