OS X V10.5 Leopard :: DU Not Repairing Permissions
May 17, 2012
I have a 1.8Ghz G5 (2.5Gb RAM) PowerMac here, running Leopard 10.5.8, which is used as a file server. The drives aren't RAIDed or anything. I am going to add a 2nd internal drive to it, and as a maintenance I decided to repair pemrissions before shutting it down.However, when I ran Disk Utility, I found that I cound't repair permissions at all. I could select the drive, click the botton, and the progression bar would go to the 'striped barber pole' effect that comes up as it is preparing to do something, but then it just stays there. I can cancel it, but no repairs happen.Any ideas how to get this to work or should I just use a 3rd party solution like Leopard Cache Cleaner? I'm not sure whether other software would just come up against the same issue.
Info:
iMac, Mac OS X (10.7.3), 2.5 Ghz Intel i5, 4Gb RAM (work)
I am getting this when repairing permissions : "Warning: SUID file System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired."
When running Repair Permissions in Disk Utility, it reports that there are errors and that it's fixed them but if I run it again, the same errors keep appearing.
I've noticed that the current permissions on the errors are lrw-rw-rw- which I assume means that they are symbolic links and not the actual files which Disk Utility is expecting. Any idea what's going on?
I have a an old G4 running Mac 10.3.5 that I need to update to 10.3.9 to run a program. The machine has a long boot time so I'm worried it might die soon.
Anyways I am wondering if I should click "repair permissions" and/or "verify permissions" before I do the 10.3.9 combo update. Will this increase the chances that the 10.3.9 update will not cause problems? Or can repairing permissions itself cause trouble?
I have never repaired or verified permissions on this machine.
I am running a MacBook 2.4GHz Intel Core Duo, 4GB SDRAM on Snow Leopard 10.6 and when repairing permissions, I get this message: Warning SUID 'system/library/core services/remote management/ ARDAgent app/contents/ Mac OS/ ARDAgent' has been modified and will not be repaired.
Ok, so I go to repair permissions and I get these files repaired. So, 10 minutes later I did repair permissions again (I had a hunch), and the same EXACT files get repaired.
And this happens everytime. I don't even do anything in between the repairs (I don't launch new apps or even move my mouse).
Is this normal because I never had this happen before on my Mac?
Lately I've noticed that when I repair permissions, it's the same files that keep appearing the log of files being "repaired"... which leads me to believe they're not actually being repaired at all.
It's at the point where I can repair permissions once, generating a log of repaired files, and then if I repair permissions again immediately afterwards (whether I've closed and reopened Disk Utility in the mean time or not), the same exact list of files appears as being repaired.
I've been having some real odd things going on with Snow Leopard. I thought that repairing permissions and repairing the disk may help. I ran the tests, but there are errors that look like they cannot be fixed. Below I posted the log file from Disk Utility:
Code: 2009-12-16 15:44:25 -0700: Disk Utility started. 2009-12-16 15:45:12 -0700: Repairing permissions for "Macintosh HD" 2009-12-16 15:46:43 -0700: Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x . 2009-12-16 15:46:43 -0700: Repaired "usr/share/derby". 2009-12-16 15:47:09 -0700: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired. 2009-12-16 15:48:55 -0700: 2009-12-16 15:48:55 -0700: Permissions repair complete 2009-12-16 15:48:55 -0700:
What I should do since Disk Utility won't repair the problem?
To repair permissions I just click a little "Repair Permissions" button. Don't know why nor what it actually does, but I understand that I should do it from time to time.
But if it's so important, why doesn't OS X just do it automatically?
I am trying to figure out why my early 2008 macbook pro is lagging. I tried to repair disc permissions but it always repairs the same ones. The other thought I had was that the video card may be on its way out, but not sure how to check that.
After reading on the internet that you should repair disk permissions around once a month or something I decided to do it after not doing it for ages, so I go and do it, then shut it off and leave it for a bit, and then when I turn it on I open Safari and I notice that its taking a really long time to load Apple's Start Page, so I think nothing of it and turn it off again, then a bit later I turn on and I find the internet on it still just as slow.
So I am wondering if its cause I did it or because of my router.
I recently ran Disk Utility on my MacBook (OS 10.4.11), and it said the node structure was invalid. The next day, I repaired the disk with DiskWarrior (I didn't have an OS X disk around, so I couldn't use Disk Utility).
However! Before I tried using DiskWarrior, I repaired permissions in Disk Utility, figuring that it was good routine maintenance. Disk Utility changed some permissions, and ever since, the Finder immediately quits and restarts when I navigate to certain folders. The "bad folders" seem to vary with no apparent cause: for a while it only cared about a certain folder inside my home folder, but now it's started to quit whenever I navigate to my home folder (which means I can't use Command-N, though I can make new windows by clicking on the hard drive's desktop icon). Occasionally it lets me go to my home folder for no apparent reason, and sometimes I can get to otherwise "bad" folders by clicking on my shortcuts on the leftmost panel of the finder window (though not always). In short, it's not very consistent, and changes over time. It's still doing this even after repairing the disk, zapping PRAM, and trying fsck (which said the disk was OK). Both Disk Utility and DiskWarrior think my permissions are fine.
I bought this G5 with consistant startup problems but after replacing the hard drive,installing a fresh operating system, re-seating the ram, checking the Pram battery, etc, it was running fine. I now realize that when trying to repair the disk permissions, the same list keeps coming back even though it shows it's been repaired. Also, occasionally it may freeze or go into kernal panic on startup. If the hard drive is new, does it sound like a possible hardware problem? Does repairing disk permissions involve anything hardware?
Basically, all the general information about it.. I've been reading people's problems and I see this all the time, and I'm totally confused on what it.
I am running snow leopard, have 8 GB RAM and 320GB hard drive
I've had the computer 5 months, and today randomly decided to "repair disk permissions" on disk utility.
Estimated time remaining is 32 mins. So far there is already a huge list of details, mostly things that are supposed to be set at 95 or 1 but are set to 0 (not sure what this means).
Is it supposed to take this long? What exactly is it fixing, and how did these problems arise from simple regular use? Will I notice a difference in my computer's speed afterwords?
I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?
I am concerned about my MacBook Pro that I am running Lion on... recently I had to force quit the finder. Everything seemed to check out using TechTool Pro 6. Repairing permissions takes a very long time.
I cannot install any updates. Get a "run preflight script" error. I've tried repairing my disc permissions to no avail. I want to repair with the disc that came with my MBP. Will I be able to just repair the OS without reformatting and reinstalling? I ask this because I have SO MANY progs (as well as parallels with winXP) and such on the mac and it would take an entire day to reinstall everything. Just wanted to know if I could avoid that.
i got a white screen when i booted up last night, so i saw it as an opportunity to upgrade rather than trying to fix it. I popped in a fresh copy of snow leopard, it made my white screen boot up. before installing, i opened disk utility and erased my hard drive, and it automatically made a single partition, titled "untitled" and mounted it. i installed to "untitled" and turned install log, and the progress bar is empty. time remaining: about 30 minutes log: checking catalog file is the last line, and it's been there for over 1 hour. i restarted and now it says "volume headers need minor repairs" "repairing volume" and hangs there now.
Disk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
After getting a replacement IMac and restoring all my files, applications, etc., from a Time Machine backup, I went to run a game I have which attempted to install a patch, but the patch would not apply, why, file permissions I'm sure. It looks like when Time Machine restored my computer it also restored my previous user account. I had to login as the restored user account to apply the patch. Now this brings up some questions.
My new user account is an admin, why wouldn't it be able to apply the patch. I logged into my old account to give my new account read/write permission on the game folder, but still couldn't apply the patch? Do I have to be the owner? Any good links about file permissions in Snow Leopard. I'm thinking I may have to re-install these apps to fix the permissions.
After some various installations and file copy from/to external hard drives i ran the repair permissions on the bootup hard drive.
There was a listing about a mile long. Whoa, that does not look good to me.
So, i ran the persmissions repair again: another mile long listing: yikes.
Yep, ran another permissions repair and same thing.
How many times do you have to run permissions until it just show a few permissions that had to be corrected ? Or is this a sign that the system is in trouble.
This was an external FW drive with Leopard run by iMac 3.06GHz.
OK in Leopard I could always select a bunch of files, right click and get info, then change the permissions to Read and Write for Everyone and Leopard would apply it to all files selected. Now, when I try the same thing in Snow Leopard it actually opens the get info window for every individual file selected and I have to manually apply it to each one. Does anyone know how to go back to the old way?
I've noticed a quirk in SW. If one deletes an account (for example, the original Admin account) and answers that he would like to delete the home folder, more often than not, he is asked for the permission of an Admin account. However, if one doesn't enter the credentials and presses cancel, the account (and home folder) disappear anyway. Is this normal? Or is there data residue hiding somewhere.Â
