I am running a MacBook 2.4GHz Intel Core Duo, 4GB SDRAM on Snow Leopard 10.6 and when repairing permissions, I get this message: Warning SUID 'system/library/core services/remote management/ ARDAgent app/contents/ Mac OS/ ARDAgent' has been modified and will not be repaired.
View 1 RepliesI am getting this when repairing permissions : "Warning: SUID file System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired."
Doesn't look like permissions get fixed.
What can I do?
Using OS X 10.5.6
When running Repair Permissions in Disk Utility, it reports that there are errors and that it's fixed them but if I run it again, the same errors keep appearing.
I've noticed that the current permissions on the errors are lrw-rw-rw- which I assume means that they are symbolic links and not the actual files which Disk Utility is expecting. Any idea what's going on?
I have a an old G4 running Mac 10.3.5 that I need to update to 10.3.9 to run a program. The machine has a long boot time so I'm worried it might die soon.
Anyways I am wondering if I should click "repair permissions" and/or "verify permissions" before I do the 10.3.9 combo update. Will this increase the chances that the 10.3.9 update will not cause problems? Or can repairing permissions itself cause trouble?
I have never repaired or verified permissions on this machine.
I have a 1.8Ghz G5 (2.5Gb RAM) PowerMac here, running Leopard 10.5.8, which is used as a file server. The drives aren't RAIDed or anything. I am going to add a 2nd internal drive to it, and as a maintenance I decided to repair pemrissions before shutting it down.However, when I ran Disk Utility, I found that I cound't repair permissions at all. I could select the drive, click the botton, and the progression bar would go to the 'striped barber pole' effect that comes up as it is preparing to do something, but then it just stays there. I can cancel it, but no repairs happen.Any ideas how to get this to work or should I just use a 3rd party solution like Leopard Cache Cleaner? I'm not sure whether other software would just come up against the same issue.
Info:
iMac, Mac OS X (10.7.3), 2.5 Ghz Intel i5, 4Gb RAM (work)
when repairing permissions what in disk utility app. do you pick . I usually only repair the mac HD . Should there be any others ?
View 1 Replies View RelatedOk, so I go to repair permissions and I get these files repaired. So, 10 minutes later I did repair permissions again (I had a hunch), and the same EXACT files get repaired.
And this happens everytime. I don't even do anything in between the repairs (I don't launch new apps or even move my mouse).
Is this normal because I never had this happen before on my Mac?
Lately I've noticed that when I repair permissions, it's the same files that keep appearing the log of files being "repaired"... which leads me to believe they're not actually being repaired at all.
It's at the point where I can repair permissions once, generating a log of repaired files, and then if I repair permissions again immediately afterwards (whether I've closed and reopened Disk Utility in the mean time or not), the same exact list of files appears as being repaired.
I've been having some real odd things going on with Snow Leopard. I thought that repairing permissions and repairing the disk may help. I ran the tests, but there are errors that look like they cannot be fixed. Below I posted the log file from Disk Utility:
Code:
2009-12-16 15:44:25 -0700: Disk Utility started.
2009-12-16 15:45:12 -0700: Repairing permissions for "Macintosh HD"
2009-12-16 15:46:43 -0700: Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x .
2009-12-16 15:46:43 -0700: Repaired "usr/share/derby".
2009-12-16 15:47:09 -0700: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
2009-12-16 15:48:55 -0700:
2009-12-16 15:48:55 -0700: Permissions repair complete
2009-12-16 15:48:55 -0700:
What I should do since Disk Utility won't repair the problem?
To repair permissions I just click a little "Repair Permissions" button. Don't know why nor what it actually does, but I understand that I should do it from time to time.
But if it's so important, why doesn't OS X just do it automatically?
I am trying to figure out why my early 2008 macbook pro is lagging. I tried to repair disc permissions but it always repairs the same ones. The other thought I had was that the video card may be on its way out, but not sure how to check that.
Info:
MacBook Pro, Mac OS X (10.7.4)
Is it ok to browse while your mac is repairing permissions?
View 5 Replies View RelatedAfter reading on the internet that you should repair disk permissions around once a month or something I decided to do it after not doing it for ages, so I go and do it, then shut it off and leave it for a bit, and then when I turn it on I open Safari and I notice that its taking a really long time to load Apple's Start Page, so I think nothing of it and turn it off again, then a bit later I turn on and I find the internet on it still just as slow.
So I am wondering if its cause I did it or because of my router.
I am repairing permissions and it has been 3 hours! Is something wrong?
I have had it take an hour before but this is making me nervous. It is however making that ticking clicking sound. What should I do?
I recently ran Disk Utility on my MacBook (OS 10.4.11), and it said the node structure was invalid. The next day, I repaired the disk with DiskWarrior (I didn't have an OS X disk around, so I couldn't use Disk Utility).
However! Before I tried using DiskWarrior, I repaired permissions in Disk Utility, figuring that it was good routine maintenance. Disk Utility changed some permissions, and ever since, the Finder immediately quits and restarts when I navigate to certain folders. The "bad folders" seem to vary with no apparent cause: for a while it only cared about a certain folder inside my home folder, but now it's started to quit whenever I navigate to my home folder (which means I can't use Command-N, though I can make new windows by clicking on the hard drive's desktop icon). Occasionally it lets me go to my home folder for no apparent reason, and sometimes I can get to otherwise "bad" folders by clicking on my shortcuts on the leftmost panel of the finder window (though not always). In short, it's not very consistent, and changes over time. It's still doing this even after repairing the disk, zapping PRAM, and trying fsck (which said the disk was OK). Both Disk Utility and DiskWarrior think my permissions are fine.
I bought this G5 with consistant startup problems but after replacing the hard drive,installing a fresh operating system, re-seating the ram, checking the Pram battery, etc, it was running fine. I now realize that when trying to repair the disk permissions, the same list keeps coming back even though it shows it's been repaired. Also, occasionally it may freeze or go into kernal panic on startup. If the hard drive is new, does it sound like a possible hardware problem? Does repairing disk permissions involve anything hardware?
Powermac G5 2 GHz
500G HD
4.5 G memory
What does everyone mean when they say this?
What does it do?
Basically, all the general information about it.. I've been reading people's problems and I see this all the time, and I'm totally confused on what it.
Also, what is PRAM? What does resetting it do?
I am running snow leopard, have 8 GB RAM and 320GB hard drive
I've had the computer 5 months, and today randomly decided to "repair disk permissions" on disk utility.
Estimated time remaining is 32 mins. So far there is already a huge list of details, mostly things that are supposed to be set at 95 or 1 but are set to 0 (not sure what this means).
Is it supposed to take this long? What exactly is it fixing, and how did these problems arise from simple regular use? Will I notice a difference in my computer's speed afterwords?
I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?
Info:
iMac, Mac OS X (10.7.1)
Is it better to boot in Safe Mode in Lion to repair permissions?
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
I am concerned about my MacBook Pro that I am running Lion on... recently I had to force quit the finder. Everything seemed to check out using TechTool Pro 6. Repairing permissions takes a very long time.
Info:
iMac, MacBook Pro, Mac OS X (10.6.1)
I've two Macs, a Mini and a Macbook. I've had no issues with wireless at all, but today when using my Macbook to connect to my network for the first time, I had a message pop up that I've never seen before and I'm not sure why. I checked the MAC address of my mini and it is not the one described in the warning message. I changed my wireless password immediately and do so regularly anyway ( weekly basis ) but the machine with the unknown [to me] MAC address is still connected when I look in the Attached Devices info pane in my router.
View 22 Replies View Related"You may have difficulty booting from this target volume, the underlying disk is not formatted with a partitioning scheme that Apple recommends for Intel Macs. See the "Getting Started with CCC" section of the CCC documentation for more information." My hard drive has three partitions: 1 time machine, 1 ccc (HFS+ journaled), 1 FAT drive.
View 4 Replies View RelatedI am attempting to install MySQL on my iMac. I downloaded the DMG packages and instaled them, then the instructions I was following from this [URL]. It told me to install a mysql connector (I am new to all of this so I dont know what a mysql connector is). This did not have a DMG package available, so I downloaded the tar.gz as it was my only option. Following the instructions I opened terminal and entered the following command (as shown in image above): sudo pico /etc/my.cnf. I am concerned about the warning message - this is a work computer and I cannot afford to replace it if something gets screwed up.
Info:
iMac, Mac OS X (10.7.3)
I am using a mac book pro 10.8.3. i7, 8gb ram, 2.3Ghz. I use this laptop mainly for producing music on a software called Ableton Live. I also have an audio interface connected to my laptop to avoid latency. The audio inter face is called 'Traktor Audio 2'. Â
Recently when im on the laptop a warning message pops and goes aways to quickly to even read what it is. Also if there is any sort of connection, my logitech mouse has also started to act weird. Whenever i click a single time it double clicks sometimes and sometimes it is normal. i don't understand why either. i did some research on this topic and people said to open up your console and check. I dont understand what it means so i've attached a pic down here.
I have MAC 10.5.8 and use Firefox 3.5.7. Whenever I download a file and try to open it, I get this warning: xxx is a web application which was downloaded from the internet. Are you sure you want to open it?Whereas "xxx" is the name of the file I downloaded.I want to get rid of this warning message. I could not find a way to do so in Firefox.
View 3 Replies View RelatedAnyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
I have a mac with os X. I have saved documents and photos on my computer and am now not able to open them. I get a message that tells To view or change permissions, select the item in the Finder and choose File > Get Info. I do that and it is not locked.Â
View 7 Replies View RelatedI'm seeing this show up when I do a permissions repair in Snow Leopard 10.6.2
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x
Repaired "usr/share/derby"
It shows up each time I do this. Anyone else seeing this?
i accidentally set permissions in the Mac HD Info window for Everyone to "No Access". of course it locked up. i have an external drive plugged in running Time Machine. i understand i can use that to restore...?
I ran disk utility - it failed because it could not locate the clip art folder in word (?wha?) repair disk permissions ran for 24 hours and couldn't complete. anyway - I know there is an easy solution here - i just want to be sure i'm doing it correctly so i dont make it worse than it already is...would some kind soul please provide me step-by-step instructions to either use Time Machine to repair - or something.
