When using Boot Camp to boot into Windows, what key on a Windows keyboard do you press to move into Windows? I use the option key on my Mac keyboard which gives the alternative of Windows or Snow Leopard.
I seem to be having problems syncing up the mouse and keyboard on the new iMac with boot-camp. For some reason the keyboard is not working at all, and reinstalling boot-camp drivers does nothing. The mouse is recognised however scrolling does not work.
I had this problem before and downloaded microsoft sidewinder mouse. This solved the problem before, but now it doesn't do anything.
I was wondering if anybody knows exactly what the drivers are called for the keyboard and mouse, and how to get the mouse scrolling working? Also once I get the keyboard synced, how do I change the settings so that (for example) the volume controls work.
This is really confusing me, because I'm pretty sure when I installed Windows the scrolling WAS working, but then when I went back to it (admittedly after linking the formatted drive with Parallels) it simply doesn't work properly.
Just partitioned 150gb for bootcamp on my 1TB HDD. I installed XP Media Center OEM without a problem at all. I then put the snow leopard disk in and it autoexec'd and then looked like it was installing stuff. Then it went to screensaver and would not respond to keyboard or mouse input.
View 3 Replies View RelatedI am running windows xp with bootcamp on my mac laptop and I want to use a usb mouse so It will be easier for me to play games with my laptop. But when I plug the usb mouse in it does not register.
I am also running service pack 2
Would have checked this myself but I haven't gotten around to installing Boot Camp 3.1 yet.
Anyone with a uMBP try to see if Boot Camp 3.1 allows the keyboard light to completely shut off in Windows 7?
I described it more here.
I recently purcahsed an Apple Magic Mouse to use with my MacBook Pro. I was able successfully pair and configure the Magic Mouse on the Mac OS X side, as well as use it on the Windows 7 partition through Parallels. However, when I try to use the Magic Mouse on the Windows side through Boot Camp, it doesn't work. When I select the option to add a new Bluetooth device in Windows, the Magic Mouse is not found, therefore, cannot be set up. I believe I have the most recent version of Boot Camp (3.1). The Windows OS has been completely updated as well.
Has anyone run into this problem? If so, is there a solution for it?
I got Mac Mini and i installed Windows 7 on it with Boot Camp, After i installed drivers and everything. Everything worked includes the Magic Mouse. After i did a restart my Magic Mouse didn't work anymore. I tried turning the Mouse off and on and it still doesn't work.
The new blue tooth key board does not work in windows 7 boot camp, Windows cant locate the divice... New iMac blue tooth key board does not work in windows 7 boot camp!
View 4 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have for some time been looking for a bluetooth mouse for my MBP, but I am still stuck between the new Magic Mouse and Logitech m555b.
I will mainly be using it for travel/mobility use, as when my MBP is on the desk, I use my ageing - but loved - Logitech MX1000.
I am not a gamer. But I think that the ability to do 360 scrolling e.g. in Lightroom could be great.
I will mainly be working in Snow Leopard, but sometimes I might need boot camp for .NET development etc.
Does current boot camp drives support borth left and right click as it was a normal mouse on the magic mouse?
Is scrolling working?How is battery life?
Is there any way of invoking Expos� or DashBoard on the Magic Mouse?
Price difference between the 2 mice is not important.
i have a mac pro with boot camp. when i hold option i get the normal screen that allows to chose between my mac disk and my windows disk. so when i choose windows i then go to another screen since i have both xp and vista on one hard drive.its a black screen with white fonts, 30 secs to choose to boot into vista or an earlier version of windows etc you can use the up and down arrow to select the os
View 8 Replies View RelatedI have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedHave the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
If I use Target Mode or Boot Camp on my iMac, I need to hold down a key during startup to activate them. But my wireless keyboard doesn't get recognised by the iMac till late on in the startup process, so it doesn't realise I'm holding down the key until way too late, and just boots up normally. Is there a way around this, or do I need a USB keyboard?
View 2 Replies View RelatedI just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies View RelatedI use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
View 2 Replies View RelatedThis is my first post here... even though, I've read a lot of the things on this forum, but never decided to post a question 'til now... now that i bought a macbook pro that is.
Actually I have some sort of annoyance with boot camp. It works as it's intended (with windows 7, which is a miracle, because everyone complains about that combination). But whenever I boot up and press "alt" to select the hard drive i want to boot, it always shows Windows. Can i change it for something else? and, how can I do it? Both of my partitions have names of their own... they're not generic... but still, they are not working, what can I do??
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies View RelatedI have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple
2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?
View 20 Replies View RelatedSo i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies View RelatedI am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
