If I use Target Mode or Boot Camp on my iMac, I need to hold down a key during startup to activate them. But my wireless keyboard doesn't get recognised by the iMac till late on in the startup process, so it doesn't realise I'm holding down the key until way too late, and just boots up normally. Is there a way around this, or do I need a USB keyboard?
View 2 RepliesCan we target disk mode through usb 2.1 into the new MacBooks?
View 6 Replies View RelatedI have an iMac G3 that I suspect has a bad hard drive and am trying to recover a few remaining files from it but cannot seem to access the hard drive no matter what I do.
I got a FireWire and am trying to start it up in target mode. It's connected to my MacBook, but when I power it on with the T key down, it starts to boot up for a few seconds but then shuts down to a black screen.
I have a 2010 mac book i'm trying to zero out. But it will not boot to target mode connected t my mac book pro via fire wire 800 ( im using a thunder bolt>firewire 800 adapter)
View 2 Replies View RelatedI just bought an 800 MHz iMac G4 , and whenever I try to boot into target disk mode it shuts itself down. I am connecting to an intel iMac, and the g4 has no OS installed on it (I am trying to install tiger using my dvd install dvd, the one with the black background and grey x which the G4 won't read). Does anyone know what could be causing this issue? I've already tried reseting the PMU and PRAM.
View 11 Replies View RelatedI have a bit of a problem: I cant access my Mac because I lost the password. I recently changed my passwords on several macs, including an old PPC PowerMac G5 from ca 2005. I run 10.5.8 on this and it works flawlessly. I need to use this machine for important work.
So this is what I have tried so far:
1) Tested with all known passwords I have used in the past.
2) Tried to boot from a 10.6 install DVD
3) Tried to boot from just C and later Command C
4) Tried a different install DVD 10.4 (I dont have the original 10.5 DVD)
5) Tried to use T and Target Disk Mode from an iMac with Lion. (disconnected all other FW disks etc.)
6) Tried different Firewire cables
7) Tried different Firewire connections.
It starts obediently and show every sign of Mac-Happiness. But I simply can't get the darn thing to boot. I think it normally should have booted using 10.6?
My iMac won't boot up. I think its HDD is dead . Is there a way for me to use target disk mode to boot from my laptop HDD so that I can rescue my iMac HDD?
Info:
iMac, Mac OS X (10.6)
i have installed 10.5 on a new mac mini, based on target disc mode install, now the mini only will boot in target disc mode with other mac attatched, how can i get this little guy to boot on his own without any other mac attatched.
View 7 Replies View RelatedWe have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.
I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?
I tried running the disk utility. It finds the hard drive but wont let me verify/repair permissions (the option is grayed out). It will only let me verify/repair the disk, but it finds no errors. The installer cannot find the disk at all.
We have more than one hard drive in the G4's and the target disk mode will only mount the system drive, it doesnt see the others, so we cannot retrieve out information. Whats going on. Never had this problem before.
Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.
How do I get the G4 to not start up in Target Disk Mode?
Info:
iMac
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
The wireless on my boot camp side (XP) won't connect to my home router when is is security-enabled. It will connect fine when I take the WPA off and leave it open.My Mac side works fine in either. I've had this issue for 6 months, I just can't figure out why it won't work. A fresh windows install did not fix the issue.Anybody have any ideas?
View 5 Replies View RelatedTroubleshooting a broken display on a 13MBP with OSX Lion. Target is 2011 27' iMac running Mavericks.
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.3), Office for Mac
I've been using boot camp to run windows on my new mac pro (2009) but the internet has been really slow. On the mac side the internet connects at full bars but the PC side says low.
View 1 Replies View Related i just bought this kick ass new display, 20 inches 1680x1050 for only $120.00! its a really good deal you guys should check it out... [URL]
anyhooser, i followed the instructions for clamshell mode and i still cant get it to work. i have a wireless logitech mouse and keyboard, and i cant make them wakeup the computer when it's closed. i think i tricked it into working once or twice but i cant get it to work consistently.
When using Boot Camp to boot into Windows, what key on a Windows keyboard do you press to move into Windows? I use the option key on my Mac keyboard which gives the alternative of Windows or Snow Leopard.
i have a mac pro with boot camp. when i hold option i get the normal screen that allows to chose between my mac disk and my windows disk. so when i choose windows i then go to another screen since i have both xp and vista on one hard drive.its a black screen with white fonts, 30 secs to choose to boot into vista or an earlier version of windows etc you can use the up and down arrow to select the os
View 8 Replies View RelatedI seem to be having problems syncing up the mouse and keyboard on the new iMac with boot-camp. For some reason the keyboard is not working at all, and reinstalling boot-camp drivers does nothing. The mouse is recognised however scrolling does not work.
I had this problem before and downloaded microsoft sidewinder mouse. This solved the problem before, but now it doesn't do anything.
I was wondering if anybody knows exactly what the drivers are called for the keyboard and mouse, and how to get the mouse scrolling working? Also once I get the keyboard synced, how do I change the settings so that (for example) the volume controls work.
This is really confusing me, because I'm pretty sure when I installed Windows the scrolling WAS working, but then when I went back to it (admittedly after linking the formatted drive with Parallels) it simply doesn't work properly.
The new blue tooth key board does not work in windows 7 boot camp, Windows cant locate the divice... New iMac blue tooth key board does not work in windows 7 boot camp!
View 4 Replies View RelatedJust partitioned 150gb for bootcamp on my 1TB HDD. I installed XP Media Center OEM without a problem at all. I then put the snow leopard disk in and it autoexec'd and then looked like it was installing stuff. Then it went to screensaver and would not respond to keyboard or mouse input.
View 3 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
Is there a way to boot in Target Mode in the new Mac laptops, ie, there are no firewire ports?
View 1 Replies View Relatedthis isnt fully a mac problem but my windows 7 laptop cant see my g5 in target disk mode any ideas how to make it work? i have macdrive installed so even the hfs hd should show up
View 1 Replies View Relatedhow do you connect 2 macs via firewire WITHOUT target disk mode? i repeat WITHOUT TARGET DISK MODE.
View 9 Replies View RelatedOk well i got my mac pro and i want to target disk all my old documents over from the second hard drive, that is not the boot drive. On my power book when i did target disk mode both hard drives showed up but on my mac pro only the boot drive showed up. Is there a setting or something i'm missing? What can i do to fix it?
View 2 Replies View RelatedI need some pictures from my g4 digital audio onto my macbook, so I started the power mac up in target disk mode with the firewire cable attached, and it didn't mount. I have restarted both computers, and still the disks don't show up in disk utility. Could I have a bad cable, or is something else the problem?
View 1 Replies View RelatedI was convinced that I'd find an answer to this question on the forum, but even mroogle couldn't help me. I often have to use firewire target mode with my wife's MacBook (or friends' computers), and most of them only have firewire 400 ports. My new Mac Pro only has firewire 800 ports (which I find completely insane, considering the very useful FWTDM and the near ubiquity of FW400 on Macs...). Since FW400 PCI cards are so cheap (at least those on eBay), I thought it would be easier to install such a card in my Mac Pro. But the question remains: can all FW400 cards allow the target mode?
View 10 Replies View RelatedI'm purchasing a new MBP and I'd like to migrate my files using target disk mode, rather than Migration Assistant. Are there any good support articles online that outline best procedures for doing this?
Transferring my documents should be pretty simple, but I just want to make sure that when I transfer my iPhoto/iTunes libraries and the like that I'm transferring the right files to reconstruct those libraries, without transferring over any old files that are unnecessary from my previous system.
Is it possible to boot a macbook pro retina using an external usb3 hdd (=hdd of my previous macbook pro), and boot via target disk mode, so I can carbon copy everything to the flash memory of the new macbook ?
In principle it sounds simple, but does anyone know if it can really happen? Can it boot from usb3 in the first place? (it's faster than usb2 and fw800 so I don't see why Apple wouldn't support it).
It's important to find out before I go ahead and buy the new laptop.
