OS X :: Uploading Photos On Web Only Works In Safe Mode
Dec 16, 2009
I cannot seem to upload images onto the web from my macbook (10.6.2). It usually stops in the middle of the load, freezes with the rainbow wheel turning and either two things happen:
1. I have to force quite or
2. I get a messages stating a network error has occurred.
If they happen to work, I am getting lines on my pictures, almost like the whole thing didn't load or "skipped".
Here are a few examples:
I have tried everything. Cleaned my cache, run utilities, updated java, flash. I have tried every web browser out there. The computer did a clean sweep and told me everything is fine. Tried going from WiFi to ethernet, reset my browsers, nothing works except when I run the computer in Safe Mode. I don't get it. I have had a mac for over 10 years and I am stumped. I can run the computer in safe mode, but then a lot of my stuff doesn't work right.
Intel core 2 duo mac pro with two monitors, OSX 10.7+. Mouse only will reside in upper right of the monitor. Move the mouse and it immediatley returns to the the point of origin. Boot into safe mode and all is fine. First time this happended about one week ago, I disconnected both monitors after shutdown and unlpuged the power from the mac pro. let sit for a while and re-plugged all back in and all was fine on normal boot up.Â
I have a new IMac 24" and it has started to freeze and not respond. At one point it would only work in Safe mode. After working with Apple for several hours, we did a complete ease and reload of the OS. It would only install the first disk. We called Apple again and made an appointment at the local store. Brought it in and it booted right up. He even reinstalled the OS for us. We brought it back home, plugged everything in and it worked. It then started having the same issues after 4 days. I forced shut it down and unplugged everything. Plugged in the keyboard and mouse and everything works. The only think we have is a Lexmark printer - X5320. The strange thing is everything was working fine for 3 months and with my Mac Mini before that. Could it be a power issue? It is plugged into a APC UPS. All hardware tests pass.
I've got a G5. After a short while I turn on the computer, the computer will freeze.If I boot in Safe mode the computer is working fine. I removed few items from the start up,I used disk utilities to verify and repair permissions, but no it keeps freezing when I start up normally.
My macbook (early 2008 model). Looks like my disk drive isn't working correctly; I put in a new hard drive. I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard (with firewire); and downloaded lion from app store. Is there a way to wipe clean and start over? There is nothing on the computer that I need. I keep all my important files on an external hard drive. My big concern is I don't know how to do it and second since I don't have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.
Info: MacBook (13-inch Early 2008), Mac OS X (10.7.3)
in safe mode works normal, but usually start after a while leopard hangs, I've done hardware test dvd and normal passes through the test okay what do I do
Been having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs.  Was able to run through safe mode boot once but now seems to hang about 20% in everytime.  Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info: Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
who is used to using a PC and getting used to the Mac.Â
I'm trying to load a photo onto twitter and it asks me to select photo and then shows me the finder but where are the photos that I have stored in iPhoto? - I can't see them anywhere.Â
I then save the photo I want onto the desk top and this works but the file is too big and I can't work out how to save it as a web sized version.Â
First post and want to say this web site has already been great in answering questions. New Mac user (first 60 days) and had really been wishing that I bought the 1:1 service as the transition from a PC has been hard. Watched all of the iPhoto and Finder on line tutorials last couple of days then found this great site via Google. Wish I had found this about 45 days ago. I have done some searches and I am down to a few last questions / confirmations re: iPhoto. - IPhoto library / pictures in the library are not to be accessed using Finder... it is a finder, not a doer and that is how you end up with those pictures with and ! in them. Correct? I admit that I was thinking finder was like windows explorer and you could do things to photo files, copies, move them around, etc. - Go to many different Forum sites and I need to upload photos to those site. I can't seem to use the "browse for a file" function from these sites and see any of the photo files in the iPhoto library? From posts and a lot of trial and error is the best way to do is just to export the photos out of iPhoto library to a desk top folder? Seems like a work around. Am I missing something?............
My Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
I have been unable to restart me computer after a software update (White screen/apple logo/spinning wheel continuously). I have tried to start up in safe mode (holding down shift key) but it hasn't worked.
One day I was using my MBP open and external monitor hooked up. Everything was fine until the internet went down suddenly while I was using iChat.
My airport wouldn't see a network and after a couple restarts and a few resets my airport finally connected to my network. Once connected it would only issue a self-assigned IP, which obviously wouldn't work.
I was able to get around this by manually entering in the correct info but the speeds were low at best, usually pausing and stalling every minute.
After frustratingly trying get it to work, I entered clamshell mode because there was no reason at the time to have dual monitors. Once I did, viola, the airport kicked in and started working full force. It's been this way for about a month now.
My laptop is a MacBookPro5,1 with a 2.8 GHz processor and 4 GBs of RAM.
I've read that airports will have serious degradation issues if overheated and while that may be the issue, it doesn't seem to be the case.
I have smcFanControl installed and the MBP seems to be relatively cool to the touch. The fans never seem to be loudly kicking in and I have it raised on a fan powered cooling pad.
I do, though, use pretty much every port on my MBP. External monitor, speakers, both USBs, and firewire 800 are all in use, so maybe this is a resource issue or a very area specific heat issue.
my computer wont run in regular mode. The problem occurred when I was changing my resolution and I pressed the wrong one. The screen went blank so I restarted, then the screen turned black after the apple logo. Now I can only run in safe boot. Is there any way to change the res. for the regular boot in the safe boo mode?
Just a quick question for those that already use iPhoto 11. Does Apple now enable uploading higher res photos to Facebook? iPhoto 09 is stuck with less than VGA res photos when uploading to Facebook.
I'm using iPhoto 08 (7.1.5). I just tried to upload a bunch of photos from a Canon Powershot camera. The previews showed up normally, I hit "import all," and they appeared to import normally. When it finished, it asked if I wanted to delete the originals on the camera, and I said yes. Then it gave me the "quit unexpectedly" message. When I reopened iPhoto, my new photos were not under Events, and "Last import" shows stuff I imported last week. But the photos were deleted from the camera. there's some way I can get the photos back! It did take the time to upload, so hopefully they're on my computer somewhere? I've uploaded photos with the same camera and version of iPhoto many times without problems--the only thing that's different is that this was more photos than I usually upload at once--about 150.
I am trying to upload photos to an outside vender and it requires JAVA (which I must not have the latest version of because the site directed me to install it). I am using Mac OS X version10.5.8. If I choose About Java Preferences it says I have Java 6 Standard Edition version 12.9.0. How to find the correct update.
I have a 08 MacBook pro (not unibody) and it is now not booting up. I recently installed a Hitachi 500gb hard drive on the computer and restored through time machine and it worked fine for about 2 weeks and now wont boot and I'm wondering if its probably the hard drive. When I click power the light on the front of the computer will come on and it will sound like it is about to boot then a clicking noise seems to come from the computer and it instantly shuts off. I have gotten it to turn on a couple times since it happened by slamming the comp on the bed then for some reason it will work but as soon as I shut it, it wont turnback on. Any ideas?
Oh and PS the screen never comes on and can't boot in safe mode.
I was getting a error code 36 on my mac so I decided to try to boot up in safe mode now my macbook pro will not stop trying to boot to safe mode. I am on snow leopard.
i need help cause my brother logged in to the guest mode and since then it goes to guest mode automatically with out giving me the chance to log in the only way i can get back in to my account i have to hold the shift key down at boot, yet when i let the mac boot up normal way it goes straight to that safari web browser.
I have a 21.5 inch iMac and am running Snow Leopard. I am familiar with Safe Mode and I understand that it does a disk check and repair and also does some cache clearing during a startup process that allows the user to startup into a system where certain kernel extensions, etc, are disabled to allow for trouble shooting. Then the user can do a restart and end up back in normal mode.
My question is whether starting up into Safe Mode could prove beneficial as some sort of routine maintenance?
I'm trying to start up in safe mode, per a recommendation from Objective Development, for a Little Snitch upgrade. I'm following these steps perfectly, and I see no indication that I'm running in safe mode. Of course, I've never seen safe mode, so I'm not sure what it looks like, but I'm guessing I ain't in it because I never see the "Safe boot at the login window".
Quote:
To start up into Safe Mode, do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key (the Shift key should be held as soon as possible after the startup tone but not before).
4. Release the Shift key when you see the gray Apple and the spinning gear. Please be patient, booting in Safe Mode may take some while.
During the startup you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
I started (because I wanted to) my MBA into safe mode. Just hadn't tried it before. It took, what seemed, an inordinate amount of time to boot.
I pressed the shift ket at the BONG and released at the spinning gear screen. Is this normal? Does OS X perform disc read/write, verification, cache handling, etc. that causes the lengthy boot.
on pc, when they get software related issues, i press F8 for Safe Mode and im in 9/10 times. on Mac, I've never gotten Safe Mode to work when there's a problem.
say i DID get into safe mode, whereas i couldn't get in regularly. what more could I do that I couldn't do from disk than Repair permissions?
I guess what i'm getting at is WHAT IS SAFE MODE GOOD FOR?
I've been running OSX 10.6.2 without any problem for the last six months until today....Now when I try to run applications (other than Safari which is working slow, but otherwise ok) the application icon will appear in the dock for 2-3 seconds and then disappears without opening the program. I'm not aware that I've added or changed anything that might have triggered this problem. I can however open the applications without any problem if I boot into safe mode. I've tried more than one user profile, disk utilities, resetting PRAM, running Onyx maintenance utilities etc.
I have a G4 533 and up till 3 weeks ago it worked wonderful for a mail server. I have 1.5gb and a 300gb hard drive which has been working wonderful with no conflicts. When restarting after a software update, I noticed on the start up screen that it restarted in "safe mode". I checked for a stuck shift key and of course they were just fine. I thought it might be a heat problem because the next day I started it back up and it started normally so I ran disk utility to make sure. The next time I started, no matter if it was cool or warm, it went straight to "safe mode" just for grins, I backed up all my information onto an external drive and attempted to re-install the 10.4 disk and it went straight to the black "kernel panic" screen. "OK" I said, so I took out the 300gb hard drive all together, installed a freshly "zeroed out" 120gb hard drive that I had and then tried to start it up and it went straight back to the "kernel panic" screen. Next, I not only unplugged the cord but also took out the battery which only then would it start up alright. So now that is the only way that I can get the machine to start up in anything other than "safe mode". At this point, it is a pain in the ass but so far it is working. Does anyone have any idea what I have overlooked or what is wrong? I would really like to use the box but it is just a pain in the a$$ to do this.
