Mac Pro :: Mouse Only Works In Safe Mode?
May 14, 2012
Intel core 2 duo mac pro with two monitors, OSX 10.7+. Mouse only will reside in upper right of the monitor. Move the mouse and it immediatley returns to the the point of origin. Boot into safe mode and all is fine. First time this happended about one week ago, I disconnected both monitors after shutdown and unlpuged the power from the mac pro. let sit for a while and re-plugged all back in and all was fine on normal boot up.Â
View 3 Replies
ADVERTISEMENT
Aug 21, 2014
I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies
View Related
Dec 16, 2009
I cannot seem to upload images onto the web from my macbook (10.6.2). It usually stops in the middle of the load, freezes with the rainbow wheel turning and either two things happen:
1. I have to force quite or
2. I get a messages stating a network error has occurred.
If they happen to work, I am getting lines on my pictures, almost like the whole thing didn't load or "skipped".
Here are a few examples:
I have tried everything. Cleaned my cache, run utilities, updated java, flash. I have tried every web browser out there. The computer did a clean sweep and told me everything is fine. Tried going from WiFi to ethernet, reset my browsers, nothing works except when I run the computer in Safe Mode. I don't get it. I have had a mac for over 10 years and I am stumped. I can run the computer in safe mode, but then a lot of my stuff doesn't work right.
View 2 Replies
View Related
Jun 20, 2009
I have a new IMac 24" and it has started to freeze and not respond. At one point it would only work in Safe mode. After working with Apple for several hours, we did a complete ease and reload of the OS. It would only install the first disk. We called Apple again and made an appointment at the local store. Brought it in and it booted right up. He even reinstalled the OS for us. We brought it back home, plugged everything in and it worked. It then started having the same issues after 4 days. I forced shut it down and unplugged everything. Plugged in the keyboard and mouse and everything works. The only think we have is a Lexmark printer - X5320. The strange thing is everything was working fine for 3 months and with my Mac Mini before that. Could it be a power issue? It is plugged into a APC UPS. All hardware tests pass.
View 7 Replies
View Related
Mar 18, 2010
I've got a G5. After a short while I turn on the computer, the computer will freeze.If I boot in Safe mode the computer is working fine. I removed few items from the start up,I used disk utilities to verify and repair permissions, but no it keeps freezing when I start up normally.
View 2 Replies
View Related
May 7, 2012
My macbook (early 2008 model). Looks like my disk drive isn't working correctly; I put in a new hard drive. I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard (with firewire); and downloaded lion from app store. Is there a way to wipe clean and start over? There is nothing on the computer that I need. I keep all my important files on an external hard drive. My big concern is I don't know how to do it and second since I don't have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 1, 2012
I've read the posts regarding this issue and have
1) Reset the PRAM
2) Successfully viewed the choice of both of my startup disks
3) Had success starting up in Safe Mode
When I restart after Safe Boot, I get the same no-go. What now?
Info:
iMac, Mac OS X (10.6.8)
View 6 Replies
View Related
Apr 4, 2012
in safe mode works normal, but usually start after a while leopard hangs, I've done hardware test dvd and normal passes through the test okay what do I do
Info:
MacBook, Mac OS X (10.5.8)
View 2 Replies
View Related
Apr 13, 2012
Been having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs.  Was able to run through safe mode boot once but now seems to hang about 20% in everytime.  Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info:
Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
View 9 Replies
View Related
Jul 6, 2010
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
View 2 Replies
View Related
Sep 3, 2014
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
View 2 Replies
View Related
Jun 5, 2014
My Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
View 3 Replies
View Related
Apr 6, 2012
I have been unable to restart me computer after a software update (White screen/apple logo/spinning wheel continuously). I have tried to start up in safe mode (holding down shift key) but it hasn't worked.
Info:
MacBook, Mac OS X (10.4.6)
View 2 Replies
View Related
Aug 28, 2010
One day I was using my MBP open and external monitor hooked up. Everything was fine until the internet went down suddenly while I was using iChat.
My airport wouldn't see a network and after a couple restarts and a few resets my airport finally connected to my network. Once connected it would only issue a self-assigned IP, which obviously wouldn't work.
I was able to get around this by manually entering in the correct info but the speeds were low at best, usually pausing and stalling every minute.
After frustratingly trying get it to work, I entered clamshell mode because there was no reason at the time to have dual monitors. Once I did, viola, the airport kicked in and started working full force. It's been this way for about a month now.
My laptop is a MacBookPro5,1 with a 2.8 GHz processor and 4 GBs of RAM.
I've read that airports will have serious degradation issues if overheated and while that may be the issue, it doesn't seem to be the case.
I have smcFanControl installed and the MBP seems to be relatively cool to the touch. The fans never seem to be loudly kicking in and I have it raised on a fan powered cooling pad.
I do, though, use pretty much every port on my MBP. External monitor, speakers, both USBs, and firewire 800 are all in use, so maybe this is a resource issue or a very area specific heat issue.
View 2 Replies
View Related
Nov 30, 2008
my computer wont run in regular mode. The problem occurred when I was changing my resolution and I pressed the wrong one. The screen went blank so I restarted, then the screen turned black after the apple logo. Now I can only run in safe boot. Is there any way to change the res. for the regular boot in the safe boo mode?
View 1 Replies
View Related
Jun 27, 2014
Every once in a while the mouse pad will stop working. A wireless mouse will work in its place. The keyboard will also act extremely slow during this time. It seems like the buffer is full and it moves on to the next letter i type without using the previously typed letter.Â
Macbook pro intel i5 2.4 Ghz
8gb 1600 Mhz DDR3
Version 10.9.3
View 1 Replies
View Related
Jan 11, 2010
I have been using a Wacom Bamboo for a while now and always have it in Mouse mode.
Since I upgraded my iMac to SnowLeopard, the Bamboo Pen/Mouse mode always resets back to Pen Mode after I have booted my iMac which is verrrry annoying - especially since I have a dual-monitor setup!
I have already tried to install the latest drivers for the Bamboo but this has not resolved my problem.
Has anyone else seen this problem and possibly know how to solve it?
View 1 Replies
View Related
Sep 25, 2009
Just wondering.
View 8 Replies
View Related
May 17, 2010
I have a 08 MacBook pro (not unibody) and it is now not booting up. I recently installed a Hitachi 500gb hard drive on the computer and restored through time machine and it worked fine for about 2 weeks and now wont boot and I'm wondering if its probably the hard drive. When I click power the light on the front of the computer will come on and it will sound like it is about to boot then a clicking noise seems to come from the computer and it instantly shuts off. I have gotten it to turn on a couple times since it happened by slamming the comp on the bed then for some reason it will work but as soon as I shut it, it wont turnback on. Any ideas?
Oh and PS the screen never comes on and can't boot in safe mode.
View 3 Replies
View Related
Jun 22, 2010
I was getting a error code 36 on my mac so I decided to try to boot up in safe mode now my macbook pro will not stop trying to boot to safe mode. I am on snow leopard.
View 2 Replies
View Related
May 3, 2012
i need help cause my brother logged in to the guest mode and since then it goes to guest mode automatically with out giving me the chance to log in the only way i can get back in to my account i have to hold the shift key down at boot, yet when i let the mac boot up normal way it goes straight to that safari web browser.
Info:
MacBookPro, iOS 5.1
View 2 Replies
View Related
Oct 8, 2010
I have a 21.5 inch iMac and am running Snow Leopard. I am familiar with Safe Mode and I understand that it does a disk check and repair and also does some cache clearing during a startup process that allows the user to startup into a system where certain kernel extensions, etc, are disabled to allow for trouble shooting. Then the user can do a restart and end up back in normal mode.
My question is whether starting up into Safe Mode could prove beneficial as some sort of routine maintenance?
View 3 Replies
View Related
Feb 12, 2008
Leopoard 10.5.2 - Quad Core Mac Pro.
I'm trying to start up in safe mode, per a recommendation from Objective Development, for a Little Snitch upgrade. I'm following these steps perfectly, and I see no indication that I'm running in safe mode. Of course, I've never seen safe mode, so I'm not sure what it looks like, but I'm guessing I ain't in it because I never see the "Safe boot at the login window".
Quote:
To start up into Safe Mode, do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key (the Shift key should be held as soon as possible after the startup tone but not before).
4. Release the Shift key when you see the gray Apple and the spinning gear. Please be patient, booting in Safe Mode may take some while.
During the startup you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
View 2 Replies
View Related
Jun 11, 2008
I started (because I wanted to) my MBA into safe mode. Just hadn't tried it before. It took, what seemed, an inordinate amount of time to boot.
I pressed the shift ket at the BONG and released at the spinning gear screen. Is this normal? Does OS X perform disc read/write, verification, cache handling, etc. that causes the lengthy boot.
View 2 Replies
View Related
Dec 11, 2008
on pc, when they get software related issues, i press F8 for Safe Mode and im in 9/10 times. on Mac, I've never gotten Safe Mode to work when there's a problem.
say i DID get into safe mode, whereas i couldn't get in regularly. what more could I do that I couldn't do from disk than Repair permissions?
I guess what i'm getting at is WHAT IS SAFE MODE GOOD FOR?
View 3 Replies
View Related
Feb 28, 2010
I've been running OSX 10.6.2 without any problem for the last six months until today....Now when I try to run applications (other than Safari which is working slow, but otherwise ok) the application icon will appear in the dock for 2-3 seconds and then disappears without opening the program. I'm not aware that I've added or changed anything that might have triggered this problem. I can however open the applications without any problem if I boot into safe mode. I've tried more than one user profile, disk utilities, resetting PRAM, running Onyx maintenance utilities etc.
View 1 Replies
View Related
Jul 18, 2010
I have a G4 533 and up till 3 weeks ago it worked wonderful for a mail server. I have 1.5gb and a 300gb hard drive which has been working wonderful with no conflicts. When restarting after a software update, I noticed on the start up screen that it restarted in "safe mode". I checked for a stuck shift key and of course they were just fine. I thought it might be a heat problem because the next day I started it back up and it started normally so I ran disk utility to make sure. The next time I started, no matter if it was cool or warm, it went straight to "safe mode" just for grins, I backed up all my information onto an external drive and attempted to re-install the 10.4 disk and it went straight to the black "kernel panic" screen. "OK" I said, so I took out the 300gb hard drive all together, installed a freshly "zeroed out" 120gb hard drive that I had and then tried to start it up and it went straight back to the "kernel panic" screen. Next, I not only unplugged the cord but also took out the battery which only then would it start up alright. So now that is the only way that I can get the machine to start up in anything other than "safe mode". At this point, it is a pain in the ass but so far it is working. Does anyone have any idea what I have overlooked or what is wrong? I would really like to use the box but it is just a pain in the a$$ to do this.
View 2 Replies
View Related
Aug 23, 2010
Upon start up, I hear the chime, see the grey Apple load screen, but then after it just reaches the blue screen and stops. Cannot reach login screen, unless in safe mode.Steps I've tried:
-Reinstall tiger (erase and install)
-Replace CMOS battery (time now works correctly)
-Run Apple Hardware Test (no errors)
View 5 Replies
View Related
Apr 3, 2012
Did a Shift - Command-V and the black screen showing all the startup steps appeared and it all looked good except: AFL Alart Sockwed cant update and INIT Reboot transmit failed. All else looks good. I have tried this 3 times and never go past that point. Then the screen turns off white like it does when it starts normally before the apple appears and the last time the screen went black.
I have tried starting with just the Shift Key and computer starts up but not in safe mode. I have tired starting with the OS X disk and the C key and it will not recognize the disk.I used the #1 disk since the instructions are printed on the disk. Did not work so I tried disk 2 and I get a menu to start the OS or tools. If I click on either one the screen goes white and stays that way.
computer starts fine and provides a login window, and then the desktop screen with screen saver pictures in perfect color. As it goes through starting programs it starts the same programs that is had open when the computer originally crashed. Even when I close them, before it locks up again, and I am forced to restart the same programs open up to the same place. Its like the computer is frozen in one location and will not go beyond that point. Eventually the screen turns white and sometimes black and sometimes gray.
Tech support thought it was the video card, put a new one in but did not fix the problem and then said it was not that but that it was the monitor. I said that did not make sense since the monitor and desktop icons and pictures are beautiful and clear. They then said it was the inverter board on the monitor and Apple only replace the whole thing. I purchased an inverter board and replace it. No change. The tech person said that the computer works find without the monitor connected - I will see if that is correct next. Isn't that a more systimatic testing procedure then trying parts to see if it works? Oh I did do the complete long hardware test. Took about an hour and it passed! Isn't this strange?
Info:iMac, Mac OS X (10.5.8)
View 8 Replies
View Related
Apr 20, 2012
my Imac takes 5 minutes to start , most of the time it is a blue screen....
Info:
iMac, Mac OS X (10.6.4)
View 1 Replies
View Related
