Is there a way to update a super duper clone that I have on a portable external from my Time machine backups? It would simplify my backup protocol a lot, I travel with a live clone in case my system crashes.
When I'm at home I backup tirelessly to a time machine drive connected to my server. I would love to be able to just dock my portable with my server and be able to update my clone easily.
I just did and automatic update that consisted of about 6 items, now my external hard drive is not even recognized! Long story short, Time Machine can not find my external to do a backup. I have already done all the unplugging and restarting and searching for the disk... Nothing! my external is Lit and seemingly functioning.
Info:
Logic Pro, Mac OS X (10.7.3)
I'd like to place a Time Machine and Clone backup on the same HDD, which I understand is possible. However, if I'd like the Clone backup to be bootable, does it need to reside in it's own partition or can I simply plop it onto the HDD alongside the Time Machine backup on the same partition. (I've never made an image/clone backup or a partition before.)
View 2 Replies View RelatedI have a Mac Pro with Snow Leopard (10.6.8) with three internal hard drives. I'm using one of these hard drives for backup (not the best set up, as I would prefer something external, but hey, better than nothing). So I created a sparsebundle on one of my 1 TB drives with a max size of 700 GB, following the directions here: [URL]..(except that mine is not a network drive). But now I am faced with two problems: (1) Time Machine does not back up unless I manually tell it to. (2) Time Machine only keeps the most recent backup. It no longer keeps incremental backups, now that I'm using a sparsebundle. Prior to using a sparsebundle, neither of these problems occurred. Is this normal? Has anybody else had this issue, and how do I resolve it?
Info:
Mac Pro, Mac OS X (10.6.8)
I had to reset my iPad due to the home button issue (this by the way seems to be a hardware issue since it did not dissapear after the reset :-( )
Unfortunately iTunes created a new back-up of my iPad at the end of this reset procedure (i.e. it is a back-up of an empty ipad).
Now I would like to re-install and configure my iPad based on a back-up couple weeks ago.
If I open Time Machine, what do I need to do find and use this particular older iPad-back-up for reinstalling my ipad?
Info:
iPad 2 Wi-Fi + 3G, iOS 7.1.1
There are 3 macs:
A: an old macbook (the white one)
B: a modern macbook pro (retina)
C: another modern macbook pro (TBD)
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
So my mom comes into town and I offer to update her OS to Lion.
I go to have a look and her main internal HD is marked as the time machine backup?
How is this possiable and how do I change this? Lion won't let me install as "this disk is used or time machine backups"
After I upgraded to Yosemite, my MAC Time Machine backup drive is no longer recognized and the process freezes when I try to re-install the drive from the drive's software.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
i've been doing a lot of backups recently and was wondering which is better to use for frequent backups.
View 11 Replies View RelatedI received my new 24" iMac a few days ago, and have spent the last few days setting it up and getting acquainted with the new features.
I purchased a MyBook Studio 1TB drive to use with Time Machine, as it sounded like a good way to keep everything backed up.
Everything seemed to be working well, until I started flicking through some of my folders in TM. I noticed that the files I had added an hour or so earlier hadn't backed up. I had just recently set an exclusion on a single folder, so decided to try removing it. TM then backed a few GB of files up.
I decided to add some test files to a folder, and run TM again. Again, it didn't back the new files up.
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
Ok, so I am running an external time machine backup HDD, so now I would like to Sync that drive with another external the same size to put in my fire safe for safe keeping.What is the best Applicatin to Sync the two drives together?I had a Time Machine failure then internal drive failure so I know what it is like to lose almost everything and I do not want to be in this situation ever again.
View 2 Replies View RelatedI want to clone my iMac's internal HDD to an external one, erase the internal one, then restore the clone to it (to solve a Bootcamp partition error).
So in Super Duper, do I want to cope the HDD to a disk image, or to the external HDD?
As I understand it, when I have my back-up ready on my external, I need to reboot with the Leopard installer, open Disk Utility, select Restore, choose the source Disk Image (on my external HDD), then select the internal as the destination.
What would be the best way to apply back the clone created by Carbon Copy or Super Duper to Mac Pro
1. Boot from Mac Pro and then restore from the clone, or
2. Boot from the clone and then restore
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
I have a 15" MacBook Pro 2.0 GHz from a couple of years ago. It has a 75 GB harddrive which I am upgrading to 500 GB. My plan has been to simply clone the drive using the enclosure I purchased. But after reading some posts here, I see I have a few options.
1. I could clone. This sounds the least risky since theoretically I should end up with everything exactly the same. I do wonder about how it clones the files the operating system is using at the time, but I guess I'll just trust it knows what its doing.
2. A fresh install sounds ideal. I have had my laptop for a couple of years, so I imagine a fresh install would do it some good. But what does that mean exactly? Is it basically starting from scratch? Would I have to reinstall everything, not just the OS but also all of my programs, individually? And then transfer all of my data (music, photos, etc) given that I can find it all? That sounds a bit laborious and what if I missed something? Or am I misunderstanding the process?
3. A few months ago I purchased a Time Machine and I have been using it to back up my laptop and my external harddrive. Can I really restore my entire internal harddrive from Time Machine? I'm pretty sure I would have set my Time Machine to back up everything especially since it's a 1 TB drive. Any drawbacks to doing it this way?
I'm going to be swapping the 250 GB drive in my 2008 MBP Penryn (17) for a Seagate Momentus 500/7200rpm drive. There are two ways to go. One is to put the new drive in an enclosure and use SuperDuper or CCC to clone the main HD and then swap them. The other is to use Time Machine. That means installing the new drive blank, boot from the OS disk and format. Then go to the most recent TM state and restore. My available external HD is the FW800 Western Digital Studio. It has space for a partition big enough for the cloning. The case coming with the Seagate is the Other World Express USB2. I have good pdfs on the install procedure. Need to remember to print them, first.
View 8 Replies View RelatedI was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
Info:
iMac, Mac OS X (10.7.3)
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some quick screenshots:
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
Info:
Time Machine, Mac OS X (10.7.3)
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
