Ok, so I am running an external time machine backup HDD, so now I would like to Sync that drive with another external the same size to put in my fire safe for safe keeping.What is the best Applicatin to Sync the two drives together?I had a Time Machine failure then internal drive failure so I know what it is like to lose almost everything and I do not want to be in this situation ever again.
View 2 RepliesI have a 15" MacBook Pro 2.0 GHz from a couple of years ago. It has a 75 GB harddrive which I am upgrading to 500 GB. My plan has been to simply clone the drive using the enclosure I purchased. But after reading some posts here, I see I have a few options.
1. I could clone. This sounds the least risky since theoretically I should end up with everything exactly the same. I do wonder about how it clones the files the operating system is using at the time, but I guess I'll just trust it knows what its doing.
2. A fresh install sounds ideal. I have had my laptop for a couple of years, so I imagine a fresh install would do it some good. But what does that mean exactly? Is it basically starting from scratch? Would I have to reinstall everything, not just the OS but also all of my programs, individually? And then transfer all of my data (music, photos, etc) given that I can find it all? That sounds a bit laborious and what if I missed something? Or am I misunderstanding the process?
3. A few months ago I purchased a Time Machine and I have been using it to back up my laptop and my external harddrive. Can I really restore my entire internal harddrive from Time Machine? I'm pretty sure I would have set my Time Machine to back up everything especially since it's a 1 TB drive. Any drawbacks to doing it this way?
I'm going to be swapping the 250 GB drive in my 2008 MBP Penryn (17) for a Seagate Momentus 500/7200rpm drive. There are two ways to go. One is to put the new drive in an enclosure and use SuperDuper or CCC to clone the main HD and then swap them. The other is to use Time Machine. That means installing the new drive blank, boot from the OS disk and format. Then go to the most recent TM state and restore. My available external HD is the FW800 Western Digital Studio. It has space for a partition big enough for the cloning. The case coming with the Seagate is the Other World Express USB2. I have good pdfs on the install procedure. Need to remember to print them, first.
View 8 Replies View RelatedI'd like to place a Time Machine and Clone backup on the same HDD, which I understand is possible. However, if I'd like the Clone backup to be bootable, does it need to reside in it's own partition or can I simply plop it onto the HDD alongside the Time Machine backup on the same partition. (I've never made an image/clone backup or a partition before.)
View 2 Replies View RelatedIs there a way to update a super duper clone that I have on a portable external from my Time machine backups? It would simplify my backup protocol a lot, I travel with a live clone in case my system crashes.
When I'm at home I backup tirelessly to a time machine drive connected to my server. I would love to be able to just dock my portable with my server and be able to update my clone easily.
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
I what I would like to do is Clone the internal hard drive of my Mac Pro (I believe its a Mac Pro 1,1. 2.66 dual core Xeon), and use the clone in the current model Mac Pro Dual core 2.66 thats out now.
I need to have both machines running everything the same as both my studio's are in two different locations.
I want to clone my hard drive to use on my new one. i dont have an external hd enclosure, though, and would be happy if i didnt have to buy one. i was hoping i could make a clone onto my networked time capsule, then replace the hard drives and somehow boot from the clone from my time capsule.
View 6 Replies View RelatedI have a Macbook running on snow leopard and I wanna upgrade my internal hard drive as it is currently too small. I downloaded Carbon Copy Cloner and cloned my entire hard drive to an EXTERNAL HARD DRIVE. Now, I have that new internal hard drive from wester digital. What do I do with it? replace the current internal hard drive with the new harddrive and then how do I get the data from the external hard drive with my cloned data to the fresh western digital? Do I boot first from external hard drive etc? I am not sure what to do now?when I was given the option which hard drive to clone (or which part of the hard drive to clone) there was also the option to clone "Install Disk". I don't need to clone that, right?
View 3 Replies View Relatedcan't open the program time machine located in the folder /applications/time machine anymore, message says program ain't working for unknown reaason, but I still can open time machine in the menu bar. any clues what the trouble might be? and/or is there any way to reinstall time machine only on os x 10.7.3?
btw., on the system backup hd which is a mirror of the imac system, the programm still works
Info:
iMac, Mac OS X (10.7.3)
I cannot enter the time machine when I press the time machine icon. I press and nothing happens, so I'm not sure even if it is backing up at this point. When i go to my Tme Capsule it has the folder there for back-ups and the most recent, but no access from the icon.
View 1 Replies View RelatedHave installed an 120GB SSD in my Macbook Pro 2010 but have had a couple of problems. Sometimes when you try to enter time machine and or Finder the machine freezes. Also the only way out of this is to hold the power button down and reboot. I have been informed by Apple that there are slight differences between the 2009 and 2010 models. Another odd thing is Skype will not load up automatically on startup, despite making sure this option is ticked. Most other things seem to work. Reinstall original hard drive and all OK.I have tried this with OCZ and Crucial SSDs and get same result. I have also installed the SSDs by cloning and by direct original OS X disk.
View 11 Replies View RelatedI just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
My MacBook Pro locks up and shows the message "Please reboot your computer by holding down the power button" every time that Time Machine tries to run a backup. I turned off Time Machine and no more crashes... Sorta makes my 500 Gig Time Capsule useless.
View 8 Replies View RelatedI have my data saved on an external hard drive (OS 10.7) as I sold my previous Mac and am thinking about buying a power pc iMac using Leopard - does anyone know whether this will be able to open and transfer my data to the older Mac?
View 3 Replies View RelatedYesterday I used Migration Assistant to recover the contents of a failed MacBook Pro (Snow Leopard) from a Time Machine backup to a new MacBook Air (10.7.4). Using the same external disk for backups, I now have a folder for both the old and new machines in
/Volumes/time_machine/Backups.backupdb/
The instructions here
[URL]
explain how to reconnect time machine to the old machine's backups. Once I've done this and checked that I can access the old backups, can I simply delete the new machine folder to save space?
Info:
MacBook Air, Mac OS X (10.7.4)
I have been running Time Machine on my iMac since I got it. I installed server and now I notice that the server app has Time Machine as well but its turned off. My oringinal Time Machine in system preferences seems to be running like it always has. What is the difference between the two?
View 2 Replies View RelatedI tried backing up my macbook for the first time, using time machine, to a new portable external hard drive formatted for p.c. The screen said do you want to erase the disc and i did. It said nothing about formatting for mac, but began to appear to be backing up my computer, and was running for 3-4 hours doing that. I walked away from the computer and came back an hour or two later, and there was a message on the screen saying error, could not create directory. I don't know if this was related to the initial backup, or if an hour later it tried updating the backup and it referred to that. How do I know if my computer is backed up properly. What do I do about the message about the directory. If I don't need this program to update the backup every hour, how do I change that. Also, I have a 1 terabyte external hard drive on which I store all my raw photography files, can I plug that in and plug in another new external hard drive and back up the external hard drive to the other external hard drive using time machine as well?
Info:
macbook, Mac OS X (10.5.8)
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
I will be getting my new Macbook Pro in the near future and am very interested in using Time Machine to wireless back up my data to an external hard drive. I know I can use Time Capsule to do this, but also hear a mention of just getting an Airport Extreme and my own ext. hd. My question is that I have Verizon FIOS Internet and my modem also functions as a wireless router. How would the Time Capsule/Airport Extreme work with this? Is it possible? I do not believe that the Verizon router supports wireless N, and I would like to take advantage of the faster speeds. If I were to connect a Airport Extreme to the wireless router, would I then have 2 routers to choose from and just use the Airport Extreme to use the wireless N? I'm very confused as to how I could make this work.
View 3 Replies View RelatedAs my 160N series Linksys router neither has gigabit ports, usb connector or dual band networking, I am looking for a replacement.
When it comes to Apple routers I am looking at 2 options - either the base station with an external USB drive or get a 1TB capsule with the buildt in drive and worries regarding reliability.
What I like about the Time Capsule is that it is neat to have all in one, takes up less space and only has 1 plug to attach, while Iike the idea that I can just connect a bigger drive later on the base station solution.
1. Will the connected USB drive function just like the internal drive in the Time Capsule for Time Machine use?
2. Will everything be transparent to Snow Leopard?
3. In case of both units with an attached USB drive - can I control who actually can see the drive and access it?
4. Do they support this DNLA thing so that e.g . PS3 can access an attached drive??
I plan to 'clean up' my Time Machine/Time capsule completely, whereby I want to make it impossible for third parties to recover all or part of these old backups.After I have accompished this I want to start from scratch backing up my Mac.
Info:
iMac 27" i7, Mac OS X (10.6.6)
I just switched from hdd to ssd and i want to resume my Timechine backups, but it says that I have incorrect date and time set in my mac.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
Info:
Time Machine, Mac OS X (10.7.3)
I understand Time Machine taking a longer time initially when first installed, however my Time Machine seems to always be running, backing up ALL my files each time not just the newer ones. i.e. "it" (Time Machine) is always running.
View 1 Replies View RelatedMacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
I have a desktop G5 that I'm in the process of selling. I have been using Time Machine for my backups and am picking up a MacBook Pro to replace it as my requirements are now much more mobile.
My question is simply this; can I restore my system, backed up from my G5, to my new MacBook?
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
Info:
iMac, Mac OS X (10.6.2)
So I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry
2. No matter how many times I reformat it, it always fails
3. I tried one trick I googled - deleting the "inprogress" file - does NOT help
4. SMART status is verified
5. There are no problems if I verify/repair the disk.
