OS X :: Repairing Permission In SL - Getting Errors
Sep 1, 2009
I just did a clean install, and load my backup from Time Machine. When I tried to repair permission, I got lots of errors. It says it is being repaired.. but the next time I run, the problem retains. And there is also one SUID problem that has not been repaired..
Repairing permissions for "Macintosh HD"
ACL found but not expected on "private/etc/apache2/httpd.conf".
Repaired "private/etc/apache2/httpd.conf".
ACL found but not expected on "private/etc/apache2/users".
Repaired "private/etc/apache2/users".
ACL found but not expected on "private/etc/postfix/main.cf".
Repaired "private/etc/postfix/main.cf".
ACL found but not expected on "private/etc/postfix/main.cf.default".
Repaired "private/etc/postfix/main.cf.default".
ACL found but not expected on "Library/Preferences/Audio".
Repaired "Library/Preferences/Audio".
ACL found but not expected on "Library/Preferences/com.apple.alf.plist".
Repaired "Library/Preferences/com.apple.alf.plist".
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
ACL found but not expected on "System/Library/Keychains/X509Anchors".
Repaired "System/Library/Keychains/X509Anchors".
ACL found but not expected on "private/etc/hostconfig".
Repaired "private/etc/hostconfig".
ACL found but not expected on "private/var/db/launchd.db/com.apple.launchd".
Repaired "private/var/db/launchd.db/com.apple.launchd".
ACL found but not expected on "private/var/yp/binding".
Repaired "private/var/yp/binding".
Permissions repair complete
I've just done a fresh install of Leopard to see if it would clear off some of these permission errors. Does anyone have any suggestions? I've tried OnyX, booting off Install CD.
In fact I'm getting a grey screen when I just try to restart. Have run Disk Utility (which always finds Permissions errors - even though it appears to make repairs. Also, after erasing my hard disk and recovering my user data from Time Capsule). When I restart I don't get beyond a grey screen (with moving cursor). I can't install the update as obviously I need to restart in order to start the install process.
Whenever I verify disk permissions/disk on Disk Utility, it tells me the volume needs to be repaired, and to do this I must insert the Mac OS X start-up disk
The only problem is, my slot where you put CDs is completely wrecked (I'm very hard on my computer). Is there any other way to fix this?
I have a an old G4 running Mac 10.3.5 that I need to update to 10.3.9 to run a program. The machine has a long boot time so I'm worried it might die soon.
Anyways I am wondering if I should click "repair permissions" and/or "verify permissions" before I do the 10.3.9 combo update. Will this increase the chances that the 10.3.9 update will not cause problems? Or can repairing permissions itself cause trouble?
I have never repaired or verified permissions on this machine.
I tried to repair my HD but it said that I needed to boot from my install disc and repair then using disk utility. If I boot from the Snow Leopard install disc and then repair my HD, am I going to have to re-install Snow Leopard?
I cannot install any updates. Get a "run preflight script" error. I've tried repairing my disc permissions to no avail. I want to repair with the disc that came with my MBP. Will I be able to just repair the OS without reformatting and reinstalling? I ask this because I have SO MANY progs (as well as parallels with winXP) and such on the mac and it would take an entire day to reinstall everything. Just wanted to know if I could avoid that.
I have a 1.8Ghz G5 (2.5Gb RAM) PowerMac here, running Leopard 10.5.8, which is used as a file server. The drives aren't RAIDed or anything. I am going to add a 2nd internal drive to it, and as a maintenance I decided to repair pemrissions before shutting it down.However, when I ran Disk Utility, I found that I cound't repair permissions at all. I could select the drive, click the botton, and the progression bar would go to the 'striped barber pole' effect that comes up as it is preparing to do something, but then it just stays there. I can cancel it, but no repairs happen.Any ideas how to get this to work or should I just use a 3rd party solution like Leopard Cache Cleaner? I'm not sure whether other software would just come up against the same issue.
Info: iMac, Mac OS X (10.7.3), 2.5 Ghz Intel i5, 4Gb RAM (work)
I am running a MacBook 2.4GHz Intel Core Duo, 4GB SDRAM on Snow Leopard 10.6 and when repairing permissions, I get this message: Warning SUID 'system/library/core services/remote management/ ARDAgent app/contents/ Mac OS/ ARDAgent' has been modified and will not be repaired.
I've had little luck with getting uniform backlighting on the LED Cinema Displays, and after my second exchange, Apple wants to start taking a look at my display before I exchange again. Unfortunately I live a long way away from any Apple Stores, so driving up to one isn't really an option.
But in any case, getting a good display seems to be somewhat of a lottery - I've been wondering if perhaps a repair is a better option. I'm going to be moving to a city with an Apple store later this year - since that will fall within my 1 year warranty, do you think they'd repair my display later in the year? And can the ACDs even be repaired, or is it more of a replacement?
Ok, so I go to repair permissions and I get these files repaired. So, 10 minutes later I did repair permissions again (I had a hunch), and the same EXACT files get repaired.
And this happens everytime. I don't even do anything in between the repairs (I don't launch new apps or even move my mouse).
Is this normal because I never had this happen before on my Mac?
Lately I've noticed that when I repair permissions, it's the same files that keep appearing the log of files being "repaired"... which leads me to believe they're not actually being repaired at all.
It's at the point where I can repair permissions once, generating a log of repaired files, and then if I repair permissions again immediately afterwards (whether I've closed and reopened Disk Utility in the mean time or not), the same exact list of files appears as being repaired.
I've been having some real odd things going on with Snow Leopard. I thought that repairing permissions and repairing the disk may help. I ran the tests, but there are errors that look like they cannot be fixed. Below I posted the log file from Disk Utility:
Code: 2009-12-16 15:44:25 -0700: Disk Utility started. 2009-12-16 15:45:12 -0700: Repairing permissions for "Macintosh HD" 2009-12-16 15:46:43 -0700: Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x . 2009-12-16 15:46:43 -0700: Repaired "usr/share/derby". 2009-12-16 15:47:09 -0700: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired. 2009-12-16 15:48:55 -0700: 2009-12-16 15:48:55 -0700: Permissions repair complete 2009-12-16 15:48:55 -0700:
What I should do since Disk Utility won't repair the problem?
To repair permissions I just click a little "Repair Permissions" button. Don't know why nor what it actually does, but I understand that I should do it from time to time.
But if it's so important, why doesn't OS X just do it automatically?
I am trying to figure out why my early 2008 macbook pro is lagging. I tried to repair disc permissions but it always repairs the same ones. The other thought I had was that the video card may be on its way out, but not sure how to check that.
After reading on the internet that you should repair disk permissions around once a month or something I decided to do it after not doing it for ages, so I go and do it, then shut it off and leave it for a bit, and then when I turn it on I open Safari and I notice that its taking a really long time to load Apple's Start Page, so I think nothing of it and turn it off again, then a bit later I turn on and I find the internet on it still just as slow.
So I am wondering if its cause I did it or because of my router.
I had to cold boot my macbook after a freezeup. Everything runs fine except disk utility showed a verifying disk result of "needs repair." Unfortunately my dvd drive is broken. Is there anyway for me to boot it from the CD with a broken DVD drive? I have a iMac at home to if there is anyway to use its drive to bootup my macbook....
I recently ran Disk Utility on my MacBook (OS 10.4.11), and it said the node structure was invalid. The next day, I repaired the disk with DiskWarrior (I didn't have an OS X disk around, so I couldn't use Disk Utility).
However! Before I tried using DiskWarrior, I repaired permissions in Disk Utility, figuring that it was good routine maintenance. Disk Utility changed some permissions, and ever since, the Finder immediately quits and restarts when I navigate to certain folders. The "bad folders" seem to vary with no apparent cause: for a while it only cared about a certain folder inside my home folder, but now it's started to quit whenever I navigate to my home folder (which means I can't use Command-N, though I can make new windows by clicking on the hard drive's desktop icon). Occasionally it lets me go to my home folder for no apparent reason, and sometimes I can get to otherwise "bad" folders by clicking on my shortcuts on the leftmost panel of the finder window (though not always). In short, it's not very consistent, and changes over time. It's still doing this even after repairing the disk, zapping PRAM, and trying fsck (which said the disk was OK). Both Disk Utility and DiskWarrior think my permissions are fine.
We recently purchased a MacBook Air for a family member. She was using an old MacBook with Snow Leopard. Tried Migration Assistant, but after running overnight, the process hung with "less than a minute remaining." After waiting several hours, we decided to shut down both computers and start over. MacBook Air started up fine, and we were able to migrate from a Time Machine backup. No problems there. The old MacBook was greatly affected. The computer will not start up. The grey screen with the progress bar shows up on boot, but never moves beyond the spinning process circle. I tried booting from the OS install disk to use disk utility to repair it... but the machine seems to not accept the DVD and ejects it.Â
The only mode that I can boot into is single-user mode. I have tried using fsck to repair the disk, but even after many repeated attempts, it exits with "The volume could not be repaired." I think that this is an issue with the B-tree, which must have been damaged during the improper shut down during the migration. Are there any other options for recovering the computer? Again, this will not boot from the install disk, and the only mode that I can seem to access is single-user mode.Â
I bought this G5 with consistant startup problems but after replacing the hard drive,installing a fresh operating system, re-seating the ram, checking the Pram battery, etc, it was running fine. I now realize that when trying to repair the disk permissions, the same list keeps coming back even though it shows it's been repaired. Also, occasionally it may freeze or go into kernal panic on startup. If the hard drive is new, does it sound like a possible hardware problem? Does repairing disk permissions involve anything hardware?
have been repairing a 1.25 GHz eMac with the documented capacitor plague problem, and have managed to replace the capcitors within the logic board, however now when I attempt to boot up the eMac it gives 3 beeps and will not start, having looked up the condition I found it meant that it could detect no good RAM, so I purchased a 1GB DIMM from OWC and replaced the 2 x 512MB sticks in there previously, however the problem still persists and the machine won't boot.
Basically, all the general information about it.. I've been reading people's problems and I see this all the time, and I'm totally confused on what it.
I am running snow leopard, have 8 GB RAM and 320GB hard drive
I've had the computer 5 months, and today randomly decided to "repair disk permissions" on disk utility.
Estimated time remaining is 32 mins. So far there is already a huge list of details, mostly things that are supposed to be set at 95 or 1 but are set to 0 (not sure what this means).
Is it supposed to take this long? What exactly is it fixing, and how did these problems arise from simple regular use? Will I notice a difference in my computer's speed afterwords?
i got a white screen when i booted up last night, so i saw it as an opportunity to upgrade rather than trying to fix it. I popped in a fresh copy of snow leopard, it made my white screen boot up. before installing, i opened disk utility and erased my hard drive, and it automatically made a single partition, titled "untitled" and mounted it. i installed to "untitled" and turned install log, and the progress bar is empty. time remaining: about 30 minutes log: checking catalog file is the last line, and it's been there for over 1 hour. i restarted and now it says "volume headers need minor repairs" "repairing volume" and hangs there now.
I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?
i wrote a thread last week about some pixel issues. i've now figured out the cause of the faint pixel lines that have mysteriously begun to appear on the far left part of my screen. the pixel lines appear where i have had application windows up for an extended amount of time. saturday i had safari open for only an hour or two and a line developed on the left edge of the window, which remained there for several hours afterwards. i've also noticed lines develop on the bottom of the window as well. the pixel lines stay burned in for a couple hours and then slowly fade to normal. this makes my claim a little more tricky i think.
i've tried switching from a dark desktop background to a lighter grey, but the ghost lines still manage to show up if the computer gets used for more than just a brief period of time.
it's annoying and will probably only get worse, so i think it's time to head up to the apple store. what are my chances of them repairing/replacing my iMac? (it's less than a year old and therefore under warranty.)
