I recently put a 320gb drive into my macbook and partitioned it into 3 drives one for the OS, one for apps and one for data, eg photos, music etc. Is this necessary? It's what i do on windows based pc's but not sure whether i need to do this on the MAc in quite thae same way. Does anybody have any recomendations for partitionig this drive, i don't intend runnig bootcamp or similar, just snow leopard.
so i'm going to be a freshman in college and have decided to buy a 13" Macbook Pro laptop. I'd be getting the cheapest one ($1199) and using it for the internet, writing papers, storing music and photos, and whatever else I may become interested in while i'm in college. My question is, when ordering, for $40 I can bump the hard drive up from 250GB to 320GB...is it worth it for what i'd be using the computer for?
I'm looking to upgrade the 320gb hard drive that came with my 2.66ghz MBP. I was just wondering what's the quickest 500gb 2.5" drive around now? I would love to get the scorpio blue 640gb but I can't really justify the fact its like double the price of most of the 500gb's.lso does anyone know a good website to buy from inside the UK for stuff like hard drives and Ram, because newegg seem good but I don't think they ship here
Because of the re-introduction of the matte displays, I'm thinking about purchasing a 2.8ghz Macbook Pro. To make up for the 50$ of non-conformist-punishment-tax for the matte option I'd like to downgrade to the 320gb 7200 RPM drive. I've read about the issues with the 500gb drives - does the 320gb version also have the chirp / beep issue?
My external WD 320GB hard drive wont show up on Finder when I connect it up. Ive been having this problem ever since I pulled it out without ejecting it - I know thats bad but my macbook froze and I had no choice.
Now my external hard drive wont show up on Finder, I even tried disk utility and I was able to verify the disk & then repair it, but its like I cant use the hard drive anymore. Every time I try to add files to it or remove files my laptop freezes and I cant do anything.
Its got to the point where all I want to do now is get all my files off this external hard drive somewhow, Is there a way to get my files off this hard drive before its too late if isnt already so.
I'm looking at a MBP on CL and the seller has swapped out the HD and put in this WD Scorpio 320gb 7200 rpm HD. I'm wondering if any of you have this hard drive and can confirm it's quality or claim that it is of poor quality?
So I've just purchased a mid 2011 Macbook Pro 13" used via eBay. Was advertised as having 500gb hard drive and 6gb ram. I checked the ram and it was all legit, checked the hd capacity and it was all correct as well. So I made a new login for myself and deleted the previous owner's. Now my hard drive shows up as 320gb. Even in disk utility and terminal.
i been reading up on the drive limitations of a powermac g4 gigabit models and it seems the most it can handle with out any user intervention is a 120gig hdd. now i wanna put a 320gig in that sucker how would i go about doing it?
I recently put an upgraded hard drive in my new aluminum unibody MBP. I replaced the stock 5400rpm drive with a 7200 RPM 320 GB drive - a Western Digital Scorpio Black. I can feel a lot more vibration and I'm just wondering if this is normal. The drive upgrade and subsequent install went fine. It's mounted correctly and tight in the case. Has anyone else done this? Can you feel the vibration on your wrists more when typing? It's not annoying really, but a lot more noticeable. I took it in to the Apple Store recently and a genius commented that it was noticeable, but they don't have much experience with the new MB's and MBP's with 7200rpm drives yet, so he couldn't tell me if it was normal or not.
On another note - I get two ACL errors every time I run disk permissions. They say ACL not expected but found in "Applications" and "Library". They never go away not matter how many times I repair disk permissions. The genius said to ignore it, it's not a problem, and the web says the same thing pretty much. It's still annoying, and repairing permissions can take 5-10 minutes with this new drive.
I have a Quicksilver 933 with 1.5GB ram and 2 internal hard drives (WD 320GB, Maxtor 80Gb). Operating system is 10.4.11, Boot ROM is 4.2.5f1. It's my understanding that some QS were produced with the ability to use larger hard drives. Mine does not and I am wondering what I can do to correct this. Computer sees and writes to both drives. The 80 is fully usable but 320 only allows 128 of storage. Disk utility sees whole drive as just under 300Gb but I can't use more than 128. I have ATA HiCap driver that will allow me to partition into sections but it's a pain. Is that my only option or buying a card?
I picked up an ibook g4 14", and everything was working fine. Today, the hard drive failed, so I picked up a 320gb western digital PATA hard drive and installed it. Disk utility recognizes it, but when I go to install panther (the original restore disk), it says it can't install on that volume... no matter what size the partition is. I also have a tiger (legit), but only have access to a copy of it. I can't seem to get the ibook to boot from the tiger disk, it just goes into open firmware. I only have access to the ibook as far as macs go, but i have two pc's... any ideas? I'm trying to get this going for my daughter tomorrow morning.
I have been searching the internet for 3 days and finally gave up, besides buying another hard drive. Ill try to keep this short. i got Macbook C2D / OSX 10.4 / 80GB HDD What happened: I wanted to free up space on my macbook, so I removed my bootcamp partition buy using the bootcamp installer to merge the osx and winxp partition back together. The installer froze for 30min and i decided to manually restart (holding power button). What a mistake i made, on reboot i only get the folder with the "?" icon. Symptoms: OSX installer does not see a drive. None of the bootable linux recovery disk Ive tried can see the drive. WinXP, Win98 recover disks do not see the drive. Terminal "diskutil list" shows=
The standard HD that came with my Mac Pro was a 320GB which I thought would be big enough. I also added a 500GB in bay two for all of my work files. As I migrate all of my files onto the Mac now, I'm realizing that the 320GB is quickly running out of space with all the photos, music, etc. and my work files currently take up about 50GB so the 320Gb would have been better for that. Is there an easy way to swap my 320GB boot disk files with the 500GB data drive?
So I just partitioned my drive to install Windows and noticed that my hard drive is now making that "crunching" sound that some hard drives make. It started during my Windows installation, and it happens regularly in Windows.
I also briefly hear it while OSX is starting up, but it doesn't seem to happen much in OSX. I've launched a bunch of applications and it is still pretty much silent.
Any ideas what could cause this? Could it be NTFS? I have several hard drives in my PC that don't make that sound. I am using a 17" MacBook Pro unibody with the regular 320gb 5400rpm drive that it comes with.
I am thinking about partitioning my internal hard drive with Bootcamp and then installing Windows so that I can run some software that requires Windows (ARCGIS is the particular software). my Mac runs smoothly and I want to keep it that way. I am afraid that if I partition and install Windows.Are there any such risks to partitioning internal hard drive and installing Windows?
In the effort to use Time Machine, I want to partition my external drive. I have 500 gig external, and would like to have one partition of 480 and one around 20. This way, Time Machine will only back up onto the smaller partition, not endlessly backing up until all 500 gigs are used. The reason I need to partition without erasing is my 170 gig iTunes library. Its too large to transfer to my internal HD, and I have no other drive to store it on.
I tried to use Bootcamp to install Windows XP Professional. When trying to partition through bootcamp I got this error:
"The disk cannot be partitioned because some files cannot be moved. Backup the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) Volume. Restore your info to the disk and try using bootcamp assistant again."
I tried to create a journaled partition after using the disk utility to fix any problems which it found none. The problem was that the partitioning never stopped it went on for hours till I finally canceled it. I also have a problem with VMware Fusion which you can find here: [URL]
I'm on a 15" macbook; 128 SSD with a single MAC OS Extended (Journaled) partition of size 120.99GB with 44.52GB of free space.I would like to install Windows 7 on my computer, and so I went to make a small partition for it. Using Bootcamp in an attempt to create a 30GB partition, I got an error message saying that some files could not be moved, and so the partition failed. I have no idea what those unmovable things might be.Using Disk Utility, trying to partition the drive results in a failure. In response to some threads I was able to find, I tried partitioning the new drive as free space, as well as trying for 30GB, 25GB, and 20GB... all met with failure.I have a time capsule, but my attempt to back up my computer seems to stall at the point of checking for changes (no change after 30 minutes, get pinwheel, tried repeatedly)How can I go about making a little partition for a Windows install? I've never felt so failed by OS X
Does anyone know if I can partition a hard drive to put Tiger on the new MBP along with leopard. I want to maintain funcitonality of my old Minolta Film Scanner that only works with Tiger.
So I've got a unibody MBP and connected to this I have a 320gb external drive I use to back up, but I only back up music, movies and documents so it's got 50 free gigabytes. I was hoping to partition off say 30gigs, install tinyxp and play games off this partition. But when I try and partition off 30, 25 or even 20 gigs Disk Utility tells me there's no free space on the hard drive.
So my questions are, how can I solve this issues, and would this idea work for playing games through windows anyway? I initially tried to get a bootcamp partition on my main Macintosh HD, but apparently there are files that cannot be moved in the way, and the only way to solve said issue is a complete reinstall of leopard, which I can't be bothered with seeing as snow leopards only a couple of months away.
What I have set up at the moment on my macbook is a single partition. One for my mac and a 20GB one for windows XP. What I want to do is create a new partition (by taking space out of the mac side) to create a new drive that my current windows partition can see (as I understand you cant make an existing partition bigger so that would be my solution) This is just for the existing windows drive to store files on. Is that possible and would the current windows disk see the new drive? I just need it to because I have run out of room on the windows side. I am running more programs than I thought I would need to!
I'm looking to use a single external hard drive to use as a backup for my files between my two laptops. One MBP, one Dell. I need some help with how to partition the drives correctly.
I will be moving files over 4GB, so FAT32 is not an option, plus the drive will be at least 500GB, and I know FAT32 sometimes has issues when partitioned that large. So FAT32 is out. What I'm looking to do is have half of the drive formatted to NTFS, and half formatted to HSF+.
I'm about to partition my WD passport into two section . It's 120 gigs and I'm going to use 100 gigs to back up all by media on my mac (pictures music video) and then I'd like to have a 20 gig section for extra flexible storage/transporting files from computer to computer, including PCs. So carbon copy cloner says the drive has to be formatted to HFS+ but in disc utility I don't see HFS+ under partition/format. also for the smaller partition what would be the best format for what I described above?
I have a 1TB drive thats NTFS formatted and containing files. How can i make another partition so i can format it HFS+ but without deleting my already stored files?
I've already partitioned my hard drive into two sections, one that I would like to run tiger on and the other leopard...I'm using a .dmg file to install leopard so I used a method utilizing disk utility that has me mount the image then restore it to the partition I want to install it on, but every time I try to restore it I get a message... "An error (16) occured while copying. (Resource Busy)" A few other times I tried it gave me different error messages but I can't remember what they are...and now my other partition I tried to restore it to appears as "Mac OS X Install DVD", the file name of the.
I have been having awesome experience using OS X and Xp at the same time! But lately when I try to run the games on VMware... its starting to lack in graphics and memory. So, I was thinking of installing bootcamp. My first question is will I have stuff that I have installed in VMware Xp in Xp installed on Bootcamp? Secondly, if bootcamp is partitioning the HD then is that mean when I want to reinstall the OS X and wipe the HD will I only have the part that had OS X? Sorry I am pretty new to Mac and I never was brave enough to install xp on Bootcamp xD.
I have an intel iMac (non-aluminum) without an operating system. But there are lots of important files on the iMac's hard drive. Can I install OS X Tiger on it without erasing any files, and still have them be accessible on the computer? If so, how?
My drives for all 3 imacs i have gone through so far were dead silent until I Partitioned them, then they made the classic stomach growl noises. I was just wondering if others with the noise problem had a partition or not, ause it seems making a partition should not effect the noise. Say I am crazy cause to me it sounds crazy but I swear the first two imacs were fine till I partitioned them. I am now afraid to partition this new one I have cause its quiet and I do not want to go back to the store again! Anyway others who have had this issue did you have a partition?
I bought a 27" iMac i7 with 8gb of ram. fully loaded and after partitioning my drive started getting pinwheel problems with the default 5400 rpm harddrive. I did a fresh install and didnt have the problems anymore. Again I put bootcamp on and there are still pinwheel issues. I went to apple and they replaced the harddrive a saying that partitions take a pie like slice out of your drive and it shouldnt effect speed. They replaced with with a 7200 rpm harddrive. All was well until I partitioned the drive again. The weirdest part is that windows runs at 10000 mph where 10.6 pinwheels no matter what I do. I am fairly tech savvy and feel like this is maybe a defragmenting issue. I believe osx defragments files under 20mb. could this be it? It is driving me bonkers. I use both windows and osx and need to boot completely into the OSs as I am using primarily post programs like after effects.