Is there any software that can check if a NTFS hard drive is working properly and repair it if necessary?
I tried programs like Disk Warrior, TechTool Pro and Drive Genius. All seem to be good programs but none of them support NTFS even though my MBP can read/write NTFS.
I would format my external hard drives to mac format but I need those drives to be accessible on a PC as well.
I need to recover some deleted pictures from my friends PC. Is there any program that will be able to read the NTFS formatted HDD?
View 4 Replies View Relatedi have a 1tb lacie external hard drive with 2 partitions. 1 hfs+ and 1 ntfs with 33 gig. i wanted to put windows 7 on the ntfs disk and followed a guide and did
SELECT DISK 1, CLEAN, CREATE PARTITION PRIMARY, SELECT PARTITION 1,ACTIVE, FORMAT FS=NTFS, ASSIGN, EXIT
When it was done my whole hd was ntfs and my hfs partition was gone. i tried Testdisk and did a quick search and a deep search (took me 2 days), but no result. i also used Mac File Recovery to find a lose volume or lost files but no result. Now i'm using r-studio and performing a scan but i think it won't find my lost HFS+ partition.
Is there a way to save my HFS partition? My entire photo life is on it. should i bring it to a recovery specialist? or does someone has the answer? maybe reformat it as hfs?
I know that when I delete a file the data is still recoverable from the hard drive until it is replaced by other data.
So I'm looking for a program that wipes any data (preferably with the Gutmann Wipe method) off of the rewritable parts of the hard drive. Is there such a program for the Mac?
This is a thread for anyone who is experiencing a large slowdown and/or intermittent 10-60 second freezes on Mac OSX Snow Leopard, where the freezes are completely unrelated to anything you're doing, any app you're using, or whether the system is under heavy or little use. I found the issue stems from the use of Mac Fuse (with NTFS-3G installed) and/or Paragon NTFS for Mac OSX, the combination of these 2 apps essentially doing the same job (NTFS write support), conflicts and causes the hard drive to be under constant (although very little) use, which can randomly cause 30-60 second freezes. If anyone is experiencing these same freezes, uninstall either one app or the other, or both, and that might help remedy the situation. EDIT: updated because I didn't specifically mention which macFUSE plugin I had installed....
View 5 Replies View RelatedI have 2 external HDDs that I am sharing with other PCs/Macs over the network. Interestingly, when I look up the info for each volume, only one shows as NTFS-3G whereas the other one shows as just NTFS. And this NTFS volume is causing so much trouble. It doesn't wake up after it goes to sleep, and when I power-cycle it, the data I have put in previously is gone! It doesn't seem to save the data properly. Perhaps because it's just NTFS, not NTFS-3G, I cannot run "Disk Repair" from the Disk Utility app. The button is disabled whereas for other volumes, the button is enabled.
At one time, I had to connect it to a PC to run the disk repair and was able to recover some of the lost data. What the heck is going on? Howcome it is showing as NTFS opposed to NTFS-3G? Both HDDs were formatted from PCs as NTFS. Only difference is that the NTFS is 750GB one, and NTFS-3G one is just 300GB. Does NTFS-3G has size limit?
My Mac partition recently got corrupted to the point of needing a fresh install. I just starting installing my utilities again and downloaded the newest version of NTFS-3G. While doing this, I noticed that there was a "professional" version of NTFS-3G sold by Tuxera (who makes NTFS-3G). I tried to find information comparing the two, but can't; Even on their own website. Does anyone know what the major differences between them are? Is worth the $31 for a normal user (meaning someone who has a BootCamp partition, but doesn't always copy to and from it)?
View 21 Replies View RelatedI previously used NTFS-3G to write to my NTFS (Boot Camp) volume. Now, I would like to can it, and just use Apple's internal read-only NTFS stuff.. But the drive refuses to mount, if I disable or remove NTFS-3G.. If I try to mount it manually in Disk Utility, it just says "The disk could not be mounted. Try running First Aid".. I tried that, and it did not work (as expected). I have tried to create an empty file with TOUCH command in the root of my NTFS drive, called "ntfs-readonly". I have also tried to put that file in a directory called ".NTFS-3G" in the root. According to this site, it should tell NTFS-3G to mount that drive with Apples read-only driver. But this failed to work as well - getting the same error as above, when trying to mount it manually.
An interresting thing is, that when NTFS-3G is running, the format of the NTFS drive reads "Windows NT Filesystem (NTFS-3G)" - fine, that sounds logical. BUT.. When NTFS-3G is disabled, the format reads "MS-DOS (FAT32)".. Which, of course, is not true. Is Apples NTFS mounter broken on my system, maybe? If so, how can I fix that? I recall, that I removed NTFS-3G and Mac Fuse manually some time ago, using this site as guidance. That involved deleting the files it was using. I was very careful, but MAYBE I deleted one or more files, that Apples internal NTFS read-only driver needed... Can somebody perhaps assist me in some way? What can I try (apart from re-installing OS X using my Time Machine backup..)..?
Just started my forray into the whole Apple OSX life. Which app is better in your eyes?
View 10 Replies View RelatedThis doesn't have to do with OS X as much as it does my ISP (Comcast 15Mbps/3Mbps Down/Up). Comcast states you get speeds "Up to" those advertised which basically means you will never get those speeds but once in a blue moon it could happen.
I've been watching my Router activity for a few minutes (see Top graph of the attached image) and I never get near either of those advertised speeds as expected. I am downloading Xcode DMG from Apple and a few torrents are running with no bandwidth restrictions.
My question is currently I'm getting about 50% of my advertised bandwidth, if I reduced down to the 1.5 Mbps Comcast package would I probably still only get 50% of that bandwidth? I think I already know the answer but was curious what you guys thought.
How do I check the frame rate of a video on Snow Leopard?
View 2 Replies View RelatedI actually never used a tool to check bad sectors on a hdd but I decided to now since I just bought a couple external Hdds and am going to be using one for time machine.
What's the best software on a Mac I can use to check bad sectors on my external hdds.
And can they be fixed?
My tibook has been having kernel panics (Both with the polite message telling you to shut down your screen, and the one where a bunch of code rolls down the screen and it freezes). Also the computer sometimes just plain freezes sometimes and it also just shutsdown randomly. What could be the problem? i tried both sticks independently and it still happens, unless both the ram sticks are bad.How would i go about checking if my ram was within specs?
View 4 Replies View RelatedSo I have this weird occurrence when I open a Finder window and view files on one of my Mac Pro's internal harddrives.
A bunch of the Files and Folders have a Date Created of Dec 31, 1903 8:00PM.
The Date Modified is correct.
It's not every file/folder either. Mostly contained in one directory I have with client files in it.
I have:
- Reset PRAM
- Reset SMC
- Verified Permissions, Disks
- Deleted Finder's plist
So far, still happening.
Anyone have a clue as to what to check next?
I'm trying to figure out when this happened.....only noticed it today.
Could it have anything to do with sharing files from an XP machine.
Is there a way or an application I can download so I can spell check without right clicking on words? (I want to do it via the keyboard)
[URL]
I recently tried to transfer about 13,000 mp3s to my friends HDD and after about 1 hour the transfer stopped because one file was corrupt. This ruined the whole process.. Can anyone suggest a program that I can run on all the files on that HDD and verify if they are good files?
View 2 Replies View RelatedI just put in a 1GB memory upgrade in my ibook g4 1.2 ghz. How do I tell if it works?
View 11 Replies View RelatedIn the Table below (attached), Bare Feats and OWC have reported the following results for the Copy, Scale, Add, and Triad functions of STREAM to produce a single speed rating in gigabytes per second.
Are you seeing compatible results when running Geekbench?
I have 16GB installed on a 3.2GHz 8-core. 8 x 2GB using all 8 slots, but only seeing 3.5GB/s
It take 10 seconds until the blue bar even moves is this normal??
View 3 Replies View Relatedwhat is the best soft wear for virus checking and increase performance of mac
Info:
PowerBook
Is there a way to check my hard disk for bad sectors? I dropped my MacBook off a 2nd floor balcony onto grass and I don't want to get a nasty surprise sometime in the future when it tries to write to a bad sector.
Please don't say fsck because there's nothing wrong with the file system because I dropped it when it was off.
I've had my macbook for under three months, and using the iStat Pro widget, my battery health is at 89%. Is this to be expected? It seems awfully low..
View 11 Replies View RelatedIs there a way to check how fast my internet is? I remember there being a website for the iphone where you just go to and it'll tell you the speed. is there anything like that for the macbook? And if so what should the normal connection speed be?
View 3 Replies View RelatedWhat would be an ideal diagnostics/ system check up to run? I have Tool Tech Deluxe, Drive Genius 2, and Onyx.
View 4 Replies View RelatedGot XP on my MBP which has an 8600M GT, i know the supplied Bootcamp Drivers for the GPU are terrible, so i want on laptopvideo2go, and downloaded the latest driver, but im not sure it installed right, so how do i check?
Also is the latest Driver the best version? I Know sometimes a previous version gives better performance, which is why im asking
How do I check the real date of file creation in Mac OS X.
All files, I receive (mail, ...) have the created date, when I copied them in their respective folder.
My Software Update has suddenly stopped working. It hangs at "Checking for new software" and the progress bar is at about 10%. I've searched all over and have done a few things, but can't seem to get it working. I've tried removing com.apple.SoftwareUpdate.plist and removing everything in /Library/Updates. I've tried clearing cache files and repairing permissions (via Cocktail.) I've used Disk Utility to check my drive for errors and it didn't find anything. I also ran the hardware test on my original Tiger restore disc and that didn't find any errors. It is similar to this thread: [URL]. I've tried just about everything I can find and can't get it to work.
View 1 Replies View RelatedI am trying to figure out in my logs if my machine rebooted or shutdown uncleanly. I have been searching the web and these forums but I can't find what exactly to look for in Console.
View 1 Replies View Relatedwhen I write in German, I copy the text into Firefox and use the German spell checker, then copy my work back.Today I had a massive "duh" moment, when I realised that OSX has built in spell checking.Now, I am writing an email in German, and I would like to change the language of the email to German and have the spelling checked automatically instead of me having to go through each word and telling OSX that it's a German word
View 2 Replies View RelatedHow can I check to see whether my computer is connected via b, g, or n? I just got the belkin n+ router and wanted to check how my comp is connected. Also, how can I see how fast the connection is (i.e. 54mbps, 300, etc.)
View 1 Replies View Related