After updating to OS X mavericks - itunes takes for ever to extract software to restore iphones - sometimes almost stands still. I restore many phones and this is bad!. I know I should not have updated but i did -
View 7 RepliesThere's a System Restore DVD I have which contains some .pkg files within a .pkg. However the disk does not give me the option to Show Package Contents like some other DVDs will. I tried using Pacifist to extract the .pkgs that are contained in the main .pkg file, but that literally extracts all the files within the .pkg I select, not the .pkg itself. Is there any way that I can just get the .pkg itself? I'm trying to figure this out and it's driving me nuts. If it's unclear what I'm trying to do, the only comparison I can think of is on Windows. If I have a zip file within a zip file, I can simply extract that one zip file intact without having the folders/files within it extracted. How can I do this with a .pkg within a .pkg? On a related note, is there a site that's good for learning commands on Terminal in OS X?
View 6 Replies View RelatedI am aware that .exe files are designed by and for Microsoft. Are there any solutions to open a self extracting zip file with the .exe extension on an older Mac OS such as OS X Tiger?
View 1 Replies View RelatedI got a question, right now when I extract a zip the extracted file appears ontop of another file/folder.Is there any way to stop this? I would like it to go to appear to the end of all the icons, instead of on another one.
View 6 Replies View RelatedRecently my 3 year old MBP has lost its video capability. I took it to my local Apple store and apparently its a logic board issue which is going to cost $1400 to fix. Unfortunately I can't justify spending even more dough then I already have on the notebook for service.
So.. what I'd like to do is extract my iTunes library and various other documents. This must be possible, but I'm not sure how to approach it.
Currently the MBP boots just fine, and the only issue is video - so I'm hoping I can still extract the information without having to resort to removing the HDD.
First post! I'm wondering what app out there will let me create self extracting zip files that can be used on all computers (ie Mac and PC).
View 6 Replies View RelatedHas anyone tried Mail 4 (Snow Leopard's Mail) on Leopard? If so does it work? I am thinking about extracting the mail installer from the snow leopard install disk and giving it a go. My company is upgrading to exchange 2007 servers and I want to get used to using mail to sync with them. I haven't really messed with it much yet though, I have barely even played with snow leopard so far.
View 7 Replies View RelatedI have 14 .rar files that should extract into an .iso image, but I can't get them to extract together. Each one gets extracted separately. Iv tried BetterZip, Unarchiver, and Stuffit.
View 10 Replies View RelatedI have a 24 page PDF that I want to extract the text and the formatting out of it. Is there software out there that will do this (free or paid). I will do this weekly and really don't want to have to copy and paste.
View 1 Replies View RelatedI don't' want to burn them. I want them extracted to a folder; select several aspects and trash the rest. I currently have Toast but I can't see an option for just extraction.
View 2 Replies View RelatedBest application for extracting audio from video?
View 8 Replies View RelatedIs it possible to extract a section of sound from a Quicktime movie, so that I can add it to my iTunes?
View 7 Replies View Related1. I want to know if there is any way I can extract the TC information from a QT file.
2. Is there a way I can paste the same on another file?
so I have 2 MBP's one has a broken superdrive. We installed SL and windows 7 via USB. Only problem is that Windows cant read the partition with the boot camp drivers. I tried the instructions in this thread: [URL:...] But the partitions as in the instructions don't appear. I put that command and I just get /dev/disk4 and that's it. Is there any other way to extract these drivers straight from the SL disc?
View 3 Replies View RelatedI'm trying to rip my blu-ray library with MakeMKV and convert it with Handbrake (which is the best option I've come across for a mac user like myself) but when it comes to extracting .srt files from the resulting .mkv file I come to a brick wall. When I've thought I successfully extracted them using MKVTools (the only way I'm aware of on a mac) I can't find them anywhere on my computer, thus I can't utilize the "add external .srt" option in Handbrake.
View 5 Replies View RelatedAnyone know how to best extract Adobe flash video from a website?
View 5 Replies View RelatedWhile reading long PDF documents I highlight text as I go. To assist reviewing and summarising the article once finished, I copy each section of highlighted text and past them onto a word document.
I am aware of the bar at the side which allows you to view a list of annotations, and I have "selected all", but the option of copying is not available. I would to know if there is a possibility of me having all the highlighted text copied and available to be pasted on a word document in one hit?
I am trying to extract only email addresses out of Mac Mail so I can then use as input into address book or a mass mailer app. I have about 10,000 emails that need to be scanned. I have found an applescript at[URL].. which seems to have the right intent but not being an applescript expert when I run it it only creates a new workbook with the correct column headings and no content. I point it at the right mailbox. I have about 7 different mailboxes which hold emails received about a particular product which is the title of the mailbox (eg red product, black product). I figure I can produce an excel file for each mailbox and then join them togetehr adding a new column called product and populating it for the added products.
Info:
Mail
What im trying to achieve is dowloading and saving a page of images as a web archive then going back and extracting the jpeg images from the folder where I have stored the web archives.Im not having much luck yet.
View 1 Replies View RelatedWhat im trying to achieve is dowloading and saving a page of images as a web archive then going back and extracting the jpeg images from the folder where I have stored the web archives.
View 1 Replies View RelatedTwo weeks ago, my SSD had been broken due to the "Invalid node structure" error. I cannot fix it by using `fdisk_hfs`. Then I have to format and re-install, but got another error: "Install Failed: OS X could not be installed on your computer. OS X can't be installed on the disk because a recovery system can't be created. Visit [URL] .... to learn more"
Visit that article, then resize the partition and try again but nothing changes.
There is no other way, I have to bring it to the warranty service. They said they replaced my SSD with a new one. But now my Mac boot quite slow:- 10s from console to Apple logo- 30s from Apple logo to login window
It used to boot in ~ 11, 12s, the login window seems appear immediately after Apple logo.
Here're my EtreCheck report:
EtreCheck version: 1.9.13 (49)
Report generated August 29, 2014 at 8:30:05 AM GMT+7
Hardware Information: ?
MacBook Pro (Retina, 13-inch, Late 2013) (Verified)
[Code] ....
So, I have some questions:
1. Is there any way to make sure that my SSD has been replaced?
2. I would like to know what does it actually do from Apple logo to login window?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I had to upgrade my 2008 iMac in order to run some software, and now it is painfully slow & glitchy. How to improve performance
Info:
iMac (24-inch Early 2008), OS X Mavericks (10.9.3)
After the OSX 10.9.3 update, whenever I open Finder for the first time, it takes 20-30 seconds to load (beachball is spinning the whole time). I've read other posts where people post the log from Console, so here it goes. This is what comes up as soon as I click on Finder.
6/17/14 9:00:50.264 AM WindowServer[13300]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
6/17/14 9:01:04.264 AM WindowServer[13300]: disable_update_likely_unbalanced: UI updates still disabled by application "Finder" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
6/17/14 9:01:11.024 AM WindowServer[13300]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 21.76 seconds (server forcibly re-enabled them after 1.00 seconds)
Also, if I leave Finder alone for not even a minute and then come back to it, it is frozen w/ beachball and have to wait another 20-30 sec before it's responsive again.
Info:
MacBook Pro (Retina, 13-inch, Late 2012), OS X Mavericks (10.9.3)
We've upgraded to Mavericks and Abobe CC in one time, so I'm not sure this is a Mavericks or an Indesign problem..Switching between 2 programs is very very slow now.f.ex copying text between Word and Indesign takes several seconds - if I copy too soon, I still have the previous text loaded.
Also opening several Indesign files, and switching between them is a problem: it takes time to preview correctly, text "dissapearing" for a few seconds, or only re-appearing when toggling between views..I work on a iMac mid 2011, 2.7 GHz Intel Core i5 with 8 GB memory. how I can get the same spead back as before?
Info:
iMac, OS X Mavericks (10.9.4)
Does anyone know how to extract audio from video files? I can't seem to do it from within the Handbrake GUI - is there a command line way of doing it? Otherwise, what's a program that can do it? Obviously I could use Audio Hijack, but I'd rather not have the quality loss that comes with re-encoding.
View 1 Replies View RelatedI've been working with iMovie 5.0.2 lately to splice together clips of historical shows that I have on my computer. It is great for cropping them to the right moments, but I find that it takes forever to import film and then to share a movie, not to mention the unwieldy size of the final product. I learned the trick of dragging the clips directly into the media folder of a project, but I still have a problem with exporting the final product. It takes forever, and unless I choose a format exceeding a gigabyte, the quality is rather poor.
On to my question: in the package contents of an iMovie project, there is a folder called Shared Movies, then a subfolder named iDVD. I have found a high quality format of my movie there, and it is much smaller in size. While I have noticed that it relies on the individual clips in the Media folder, I can't help but think that its size would be much smaller overall if I were to somehow free it from relying on the clips, as the size of the entire project is under 300 mb. Any suggestions on how to get this movie free of the other clips?
I just purchased a new Samsung HM640JI hard drive to replace my old 250gb fujitsu hd. The problem is, if I put the new samsung hdd inside and try to do a clean install of snow leopard, the setup always hangs at "extracting essentials" and I have to keep the shutdown button pressed to close my laptop. I thought I have a ram problem or that my dvd is busted but that's not the case because I inserted the samsung hdd in an enclosure, connected it via usb and the install went just fine. After the setup was over I rebooted a couple of times (still in usb enclosure) and everything was fine but after I inserted it in my mac everything went to hell: excruciating slow boot and runtime. I repeated the process twice to be sure. My mac is a 15" 2.53 core2duo 9400m
View 10 Replies View RelatedI have OS X 10.9.2 and it's moving unbearably slow! What could the problem be?
Info:
iMac, OS X Mavericks (10.9.2)
Last night I updated my iMac to Mac OS X 10.9.4. Whenever I'm using my computer, it freezes up. How can I make it fast and smooth again? I have a most recent Time Machine backup before I updated. If there is a way to gain my computer's speed again? If not, can I possibly go back to 10.9.3?
View 5 Replies View RelatedI'm verifying such an annoying problem, mostly at startup that appears to solve automatically after OS Mavericks is running.
Sometimes my iMac boot until the login windows in 45 seconds which is very good, but most of times I have to wait 30-40 minutes for the login windows to appears
and everything is running so slowly then.
Using the following command in Terminal:
syslog -k Sender kernel -k Message CReq 'GPU |I/O e|find tok|n Cause: -|NVDA(|timed? ?o' | tail | open -efsyslog -k Sender kernel -k Message CReq 'GPU |I/O e|find tok|n Cause: -|NVDA(|timed? ?o' | tail | open -ef
This is the result:
Jun 15 20:39:51 localhost kernel[0] <Debug>: [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0xc
Jun 15 20:40:00 localhost kernel[0] <Debug>: [AppleBluetoothHIDKeyboard][waitForHandshake][35-20-ab-11-07-cd] Timeout waiting for handshake
--- last message repeated 8 times ---
[code]...
