OS X :: Manually Mounting FW 800 Drive In Mac 10.2.6
Apr 7, 2009
I currently work with an old G4 Power Mac (1.25 GHz, 2GB RAM) and have to mount a FW 800 volume (WD MyBook Studio Edition 1TB) to that computer so I can consolidate to it (Avid speak for copying some data). But it doesn't mount, and Disk Utility only shows it greyed out, and there is no option to mount it like in 10.3 and following. The strange thing is, there are already two WD MyBooks Studio Edition drives connected and fully mounted. But even if I disconnect all extra drives, the one WD MyBook is still greyed out, even after reboot, which helped sometimes. I also use this drive with a 10.4.11 PowerMac G5 and a 10.5.6 C2D MBP (Unibody). Can newer Mac OS versions leave some kind of mark, so that this older Mac OS won't allow it into its system?
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
I have a Western Digital Green 2 TB drive attached to on of the two extra SATA II ports on my 2006 Mac Pro. No problems for over three years using several drives on this port. Today the drive suddenly would not mount and I received a "Drive Not Recognized" warning. In Disk Utility the drive is completely empty without any volume. I also now have a 32-GB "phantom" volume which used my user name - but does not exist. I turned off the computer and put the drive in an external enclosure, which it mounted without difficulty. I am now updating my backup of the drive and ordered a new 2 TB WD Black drive.
Only a few days ago I had the similar problem with a SD card - missing volume contents, a "phantom" 32 GB volume. I actually reformted and erased the SD drive, ran Disk Utility to check it, and put it in another computer - using the same SD card reader - and all the files were there!! Nothing was erased at all. Very strange.
Anyone have any idea WTF is going on? It seems like my motherboard drive controllers are getting flaky. Any way to test it? I have all the usual test programs, but nothing has shown up
does anyone know how to open the DVD drive manually. It won't open if I hold down the mouse button when I turn it on. I had problems trying to install XP in Boot Camp and had to turn off the machine. Now the windows disc is stuck inside that wants to install windows each time I turn it on. It is no good holding down the options key either.
I've recently installed a second hard drive in place of my SuperDrive and now use SSD as my OS drive and a regular hard drive for data. However, when running on battery I want everything I can squeeze out of my mac so I tend to dismount the drive when on battery power. Dismounting is easy, just right click and eject, but mounting it back requires going into Disk Utility. Is there a way I can place a shortcut to mounting the disk/write some script so I don't have to go all the way to Disk Utility? Even better, maybe there is a way to code a script that would automatically mount the disk when I switch from battery to AC?
I am using a macbook pro with 10.5.8, and have an external hd (freecom 320gb). I have used it for around a year and it is almost full. The other day, after attaching it to a pc - when i now attach it to the mac, it does not mount, and the warning 'this disk is not recognised' etc comes up. It shows in disk utility, but does not allow me to verify/mount it. I'm guessing the pc has reformatted it or something
What can I do?! I have looked into data rescue software, but I'm not sure - the information cannot just disappear? and I just want the drive to have the same architecture, as all my music etc was organised in particular folders.
I just put in a new hard drive in my mac pro and every now and then when i have a issue moving files or cloning the primary drive and back the data up to the new one, I will have an error and the drive will unmount. Is this normal. I am wondering if i can make it more of a permanent mount like the primary drive.
One of the internal drives on my mac pro does not show up at all - most likely, it's dead correct? I used it to store all my itunes movies.. (ATV would connect to the mac pro and the files would play from that drive)
It's a one month old seagate drive, is it normal for it to go bust just for playing media? Can I hook it up to an enclosure and try it out.. disk utility doesn't see the drive.
Luckily I backed up most of it last night.. was going to do the rest tonight.. but ugh, just my luck.
G4 IMac, 10.4. I have a simpletech 1 tbite hard drive that does not mount almost always on my machine. I just brought it home from a friends where it does show up instantly. Ran disc utility for permissions on my imac, swapped cords. Power on before boot up, power on after, unplug firewire, etc., nothing works. I want to install OS X 10.4 on the drive to try & boot up my powerbook (panic kernel message there).
I have a laptop (10.6) I take on trips and a G5 (10.5) desktop that stays at home. I have a folder I keep synched between the two computers. When I get home I use my desktop to log into my laptop, pick the applicable drive and normally the drive icon mounts on my G5 desktop. Accept yesterday when I did this, no desktop icon appeared, however I did get a finder window to appear that represented this shared drive. The problem arose when I tried to synk the two drives using Synk. Even though this drive was supposed to be "mounted", there was no desktop icon for it and Synk could not see it. After fiddling, I was finally able to make an alias of this drive and put it on the desktop, and get Synk to find it, but the situation strikes me as strange. Why is this hard drive not mounting on my desktop like it usually does?
But the drive isn't showing up in finder AND disc utility. If I unplug the SATA connection between drive and adpter and plug it back in, the drive shows up.
Problem is: This way i cant't use it as startup volume, as the drive isn't mounted during startup.
Problem 2: Booting with the cable connected (internal startup volume this time) isn't possible either, as the wireless keyboard and trackpad aren't working after startup. I can see my desktop but mouse pointer and keyboard aren't working. After power off and unplugging everything boots up normally.
I was switching out a hard drive in an old 12" powerbook and in the process I killed the computer accidently. The problem is that I left a cd in the drive that I'd really like to get out. Is there a method for physically removing it with a paperclip or is there a button I could press within the drive?
I just purchased an ICY DOCK for use with an Intel SSD. I already a have one of these, however the new one seems to have some new revisions. Basically this new one allows me to completely take off the cover. The old one slides forward and up, but the cover does not disconnect. The old one also, when closing, makes sure the SSD is seated correctly into the connector port on the ICY DOCK. The new one does not seem to have this "automatic" feature where when I close it.
I purchased a used external, ac powered zip250 drive that's not mounting on my MacBook with the USB. I need it to transfer files from my old G4. Or is it just a dud drive?
My mother-in-laws Power PC Mac Mini stopped working the other day. After booting to disk utility and seeing that there wasn't a hard drive mounting I assumed the hard drive was dead. I ordered a replacement from OWC, opened the mini, and put in the new hard drive. Now I can't get the mini to boot from CD all I get is a blank gray screen and eventually the folder with a question mark icon. I was under the assumption I could boot to disc again, format and reinstall on the new hard drive. I also can't get the CD to eject but it is spinning up.
I'm trying to restore the OS onto my netbook and there's a tool that is supposed to be able to automatically mount a restore image onto a flash drive. Thing is, every time I try it, it only allows me to select drive bays without discs in them, so it's sort of worthless as you cannot begin the download without selecting a valid drive.
I found the direct download that the program so I have the .img file now but I need to place it onto the flash drive in order to install the OS. In the past I've just dragged the content files after mounting them in Finder over to a formatted disk but this is now consistently producing a blank boot on the netbook. Is there a command in Terminal or an option in disk utility that I am not seeing to mount the image rather than copying the files? I'm thinking that it's missing something by simply copying the files.
My hard drive from my G4 733mhz wont mount at all. The ? in a blue folder just appears. I have tried to start up from an external mountable drive and the ? again appears. When I disconnect the internal hard drive completely and boot from my external drive it boots up.
Prior to this problem I took the hard drive from my G4 733Mhz and put it in my G4 867Mhz computer to load a new disk image. I did this as I didn't have access to an external mountable drive then. After doing this the hard drive doesn't mount in either computer and when connected all other mountable drives wont mount. I have the internal drive set to master.
So I have a 4.0Gb flash drive, and a downloaded version of Windows 7. I don't have any DVDs, and I don't feel like waiting to get some. How can I mount the image onto the flashdrive so that it will boot and install?
I have this NAS drive (a 1 TB QNAP TS-209 Pro) where I keep most of my files, so I want to auto-mount two shares on that drive upon login. In Windows, it was a set-and-forget type thing. In OS X it was a little harder, I eventually got there by disabling the firewall and placing the NAS shares under Login Items and checking "Hide". This works fine on my old Mac Mini and my iMac, but on my new MBP I get some really crazy stuff. Two processes called "coreservicesd" and "System Services" (under the parent "launchd") are taking up 40-50% CPU each. This goes on for 10 minutes before it settles down, by which time some 10-15% have been drained from the battery.
(On login the estimate is 2 hours left on a fully charged MBP 17"... it jumps to 5-6 hours as soon as the CPU insanity stops). If I unmount the drive, the CPU hogging stops immediately. I can then re-mount it without getting the crazy CPU load phenomenon. I can also remove it from Login Items and mount manually through Finder with no problems. As soon as I place it under Login Items again, CPU usage shoots up to 40-50% again, this time System Preferences is listed as the culprit. Any ideas why the CPU is going berserk from connecting to a simple network drive via smb, and only when the volumes are included in Login Items? The problem is specific to this week-old computer, so let's not blame the NAS drive just yet.
I installed a x25-m, of course, transfering the HDD to the optibay. Here is my problem: Whenever I shutdown, restart or hibernate, I hear, right as the fans shutoff, a loud, almost sharp click. It is obviously the HDD. As many of us know,(that have this set up, or have read the optibay thread) this "hard shutdown" is probably due to the lack of sudden motion sensor for the HDD in the optibay setup. What to do, what to do...especially considering the fact that I boot frequently between Win 7 and OS X. Well, after some research on the interwebs, I have come to the conclusion that ejecting the poor thing prior to shutdown, much like any external device, nets a happy HDD. In the process I came to the conclusion that there should be some automation to this, and sure enough, in terminal, you can augment the volume to not mount on boot. It is a beautifully simple process as noted in this post: [URL] This is all very good news, except that I've only found a solution for OSX. I was expecting to find an equally elegant process in windows. Lo and behold, the process, script and/or command are/is evading me. If anyone out there is on a similar path, could they be so bold as to link their findings? Possibly we could collaborate to right this terrible wrong. To specify, I am hoping to make it so that the drive in question is never "mounted" until chosen to do so, hopefully something similar to the approach in OSX.
I currently have more HDs than my 09 MP can accommodate (already have 1 in the 2nd optical bay). Yet I keep one of the 4 bays as non essential, in case I have to troubleshoot a HD for either myself or friends/family. I also have a eSATA docking station, that is plugged in using an eSATA Sil3132 card. If I have to troubleshoot a problematic hard drive, does it make any difference if I mount it in one of the 4 internal bays, or using the eSATA dock?
I'm purchasing one of those handy eSATA external docking stations so I can access data on old Windows drives. I'm concerned about not corrupting data from the drives and wonder if there is a risk of OSX writing to them. Do I need to mount the drive manually from the terminal command line to insure they mount as read-only or is it safe just to browse the drive?
I guess I need to learn about imaging alternative OS drives now that I am using a Mac all the time. I've seen the "dd" format laid out elsewhere and never bothered to read up on how it is used. I would guess this will create an image, similiar to an ISO on my Mac desktop.
I bought a brand new 500Gb WD external HDD a couple days ago and it will not mount but it shows up in disc utilities. When I go to disc utilities and try to format it for my mac I get an I/O error right away. So then I give it to my friend who also has a mac and he was able to format to HFS. I get it back and it still does not want to mount. Is there a problem with my mac or is it the HDD? Mac Specs: Power Mac G4 "Quicksilver" 733MHz 1.25Gb RAM running 10.4.11
i downloaded a file on my main computer and wanted to install it on my mac witch should be perfectly easy but when i go to put it on my mac it wont mount to the hard drive
I have a Firelite Smartdisk external hardrive and when I plug it in via USB it wont show up on desktop. In system profiler it shows plugged in and in disk utility it shows up too. This disk has gone back and forth between a mac and PC. Works fine on PC. Cant be verified or repaired in untility because it is the wrong format? The hardrive seems fine, no clicking, powers up, etc.
Today I decided to change the HDD in my MBP. I read the manual prior to that so I was all set. It took me almost an hour to take the metal back off, it was a pain in the ass as I had one of those small japanese screwdrivers set with no proper grip. However when I disassembled everything, to my shocking discovery I came to those type of screes I rarely see. Those 4 screes on the side of the HDD (mounting screws). I could not take them out since I had no tool for that, Im not a native english speaker so I wanted to ask anyone how are those screws called and also the proper took size or name so I can buy it tomorrow.
I recently got a new MBP as well as a 500GB Lacie External HD. I partitioned the external for 10GB windows and the rest Mac. Anyway whenever I plug it in, I get the external hd on my desktop as well as another icon called Exchange that has manuals and software for both OSs inside. I always just eject the exchange and keep the external HD mounted, but its annoying that it pops up each time I turn on the external. Is there a way to set my external up so that the exchange never mounts. What do I even use this for anyway?
I have a 500 GB LaCie hard drive that I bought 11 months ago, so its still under warranty. It's formated with two partitions on it: Time Machine Backups and Storage which are both 250 GB. I also have windows installed on my mac via bootcamp and i have a program installed called MacDrive which allows me to view the contents of my mac hard drive and external hard drive.
Ok, so about a week ago, my hard drive wouldn't mount on my mac. I couldn't see it in Disk Utility or the Finder. It's not making any weird noises and sounds like its running normally, so i don't think anything is physically wrong with the hard drive. I booted up windows and plugged it in and this is what happened.
[URL]
I pressed OK and windows asked me what I'd like to do with the two partitions. I chose "Open files in folder" or whatever that option is and i can see my files, open them, and copy them, even the time machine partition. But when i go to my computer and click one of the partitions, it shows this.
[URL]
This EVEN shows on the Macintosh HD which worked fine before. So, does anyone know what the problem is? Should I try reformatting the external hard drive in windows? Should I reinstall MacDrive?
I have a MacBook (unsure if the G3/4/5 rating still applies) - I can give you the technical specs if it'll help but I don't think it will, as my problem lies with the DVD drive. Whenever I lift the lid on my Mac, it automatically searches and attempts to mount the disc drive. 98% of the time there's not a disc in it, so it's a waste of time, power and effort. stop it looking for discs on waking?
