I was switching out a hard drive in an old 12" powerbook and in the process I killed the computer accidently. The problem is that I left a cd in the drive that I'd really like to get out. Is there a method for physically removing it with a paperclip or is there a button I could press within the drive?
View 6 RepliesI wanna know how I can change my combo drive with a new one because this which I have is broken, I have a powerbook g4 at 12 inch, I have search it on the internet for some tutorials but I didn't find no tutorial, I found how to remove the hard drive but not the cd drive. Does any one knows how to do this.
View 3 Replies View Relatedi turn on my powerbook, after about 10 minutes a loud vibration along with noise comes from what i am sure is the dvd drive, and crashes my finder (computer). there is no disk in the drive and I have tried using it with a disk in the drive, but the same thing happens.my warranty is well over, i just need it to work and don't need the dvd drive.so, my question:is it possible to disable or remove the drive from the computer and it still function?
View 1 Replies View RelatedI've got a powerbook G4, but the screen's all messed up. I've got it going through an external monitor right now, and is it possible at all to completely remove the screen, and just use the bottom half as a desktop? I know I'd be losing the airport, but we have wired internet. Would I be losing anything else, and would this work?
View 5 Replies View RelatedI want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
I have trided to upgrade the hard drive on my G4 15" powerbook. The ribon conector from the drive to the board has come free from the board and I don't know how to refasten it.
View 2 Replies View RelatedI have a powerbook 12' 867 mghz, I know I would rather have a new one, but not ready to give up on this old gal yet! Anywhoo I thought the logic board was fried but after letting the powerbook "rest" I came back months later and sometimes it will boot but as soon as I try to do anything it freezes, so maybe the harddrive is fried? How do you get it to ignore the internal drive so it will boot from an external?
View 9 Replies View RelatedI'm after a bus powered 500GB external drive, but I can't seem to find one that runs on 1 USB connector alone.I just had to return a freecom unit as it would only run with the USB data and a seperate USB power lead connected.Does anyone know of somewhere in the UK that does either a firewire or USB 500GB notebook size drive that will run from one lead?
View 1 Replies View Relatedmy powerbook g4 titanium hard drive was makin weird noise and then it died and I can't get into operating system. now when I power on my laptop it only shows now a square with a smile face and a question mark. if I buy a new hard drive on ebay how do I install the OS on the hard drive? is it hard? will I be able to install it by myself? is there a website with the steps how to install the OS?
View 2 Replies View RelatedA few months ago it was dropped and would not boot past the Apple screen. I presumed it was faulty from the fall and instead of repairing it I figured I would just buy a new computer.
Anyway I have just purchased a new MBP 13" and I'm trying to get everything off my old laptop. It is going into target disk mode but the MBP isn't picking it up.
It is finding it in the disk utility but its just showing the beachball. To make matters worse I can't boot from a CD as the Superdrive is just chucking out CD's (guessing its bent from the fall).
Guessing its dead and Im going to have to try and get it data recovered, just seeing if there are any other ideas?
Here's the rundown: my uncle gave me a pristine Powerbook G4 Titanium edition. Good computer, 15.5" screen, definitely worth keeping. He wiped the thing clean before giving it to me. The problem is the internal CD drive is super flaky and won't take an bootable CD well. It took my Tiger bootable once or twice and bonked out during the installation. Now, I can't get anything. BUT, I have a nice external firewire 400 CD/DVD drive. I hit option and can see the disc, but the PB won't take it. Also, of course I hit C on startup to try and load from the CD. Hasn't taken since the first few tries.
View 1 Replies View RelatedI am going to manually remove each duplicate, but my ? is when you click on show duplicates...is that every copy of that song in itunes or is there still another copy that isn't showing when you select this?
View 1 Replies View RelatedA while back I bought an external hard drive for my PC, but then ditched the PC and decided to hook up the hard drive to my Mac. My External Hard Drive is a: 149.1 GB WDC WD 16 00JB-00GVA0 The problem is, I can access all the information but it will not let me do anything on the external harddrive (Like creating a file, copying and pasting a file on there, etc.) However, I can save Torrent downloads on the harddrive, but they do not show up on the actual external hard drive. But, when I press the "Find/Show directory" button in Bittorrent it does find the files. Is there something I need to do, Or is it just incompatible with my Mac?
View 4 Replies View RelatedI am new to this forums and want to know if my dvd mini discs will fit into the dvr drive on an iMac. I also have an older Powerbook and would also like to know if the mini discs will fit also. I haven't tried this yet because I don't want to loose the discs or ruin my drives. I just bought a used iMac 20" widescreen and wanted to just put my mini discs from my camcorder into it without having to plug the unit in via hard wire.
View 7 Replies View RelatedI'm a new Mac user for about 6 months now. I bought a used PowerBook G4 15" 1.25 ghz notebook that was in good condition. It was well cared for by the previous owner. Only thing she had done was update the ram to 2 gigs.Recently I began to notice it running slower, programs were freezing and Garage Band couldn't run as many tracks. I installed recommended software updates before it started to get slower and I thought maybe that was the problem.So I attempted to do a fresh swipe of the hard drive and start from nothing. I saved some files and then tried to run the software installation cd. It didn't really help at all. I can't remember the error but it wouldn't let me reinstall OS X even when I held "c" when starting up. At one point I must have clicked run in target mode because I booted it up and it showed an unfamiliar screen. Then I restarted it once again and saw on Disk Utility that S.M.A.R.T. said something about hard drive failure.
View 3 Replies View Relatedto run ppc g4 powerbook from external hard drive with apps from external hd drive intel imac g5? I have a firewire hd but it is not being recognized by the ppc.
View 1 Replies View RelatedSome of my music is duplicated and I want to remove them. How do I remove them directly from the device without any syncing?
Info:
iPhone 4S, iOS 5.1.1
Every time I log on Itunes is active.. how do you set it to load manually?
Info:
MacBook Pro, Mac OS X (10.7.3)
So I downloaded an app from this site but I can't seem to find it, is it possible that I've contracted a phishing virus, if so what are the steps i should take to remove it? [URL]
Info:
MacBook Pro, Mac OS X (10.7.2)
I have a PowerBook G4 15" 1.33GHz that up until now ran flawlessly. Today I was watching a movie on it with some friends when it randomly shutdown. Since then, it no longer turns on. The battery is fully charged and there is no problem with my AC adapter. With just the battery, nothing happens when I press the power button. When the AC adapter is plugged in and I press the power button, the optical drive spins at full speed for a few minutes and then the PowerBook shuts itself down again. I have attempted reseting pram and pmu with no success. I think it could be a dead logic board but I'm not sure. Would it be worth the money to buy a new logic board or should I just part it out?
View 2 Replies View RelatedI am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies View RelatedI can put my iBook G4 to sleep manually, but it will not sleep on its own. Why is that? I'm running 10.4.8 and I have the power settings in preferences set for "Better Energy Savings".
View 1 Replies View RelatedWell, the hdd in my powerbook has finally died. Won't be recognized in disk utility, and when it was, it wouldn't repair or even verify. I kept getting the invalid node structure error. My AppleCare subscription has also expired about 2 months ago.
So, I went online and found the following web site about opening up the Powerbook 15" (Aluminum) and how to go about replacing things in it:[URL]
Then, I went to tiger direct and found this hard drive to put in it:[URL]
What do you guys think? Is it really worth it?
What hard drive do you recommend I use?
Is this better than going and getting it done?
I can't seem to find instructions on the Apple Support site on how to remove the keyboard from a 12" Powerbook.
Can someone here explain to me how to remove it? One of the keys is sticky, so I'm hoping that I can just pop off that key and clean it. And I guess I should ask what the safest way of popping out a key is .. don't want to break anything!
Almost finished with the G4 powerbook cleanup. when I click on the network connections, there is a long list of access points. I want to remove them. How do I do this?
Info:
PowerBook, Other OS, identified as OS X10.5.8
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies View Relateddoes anyone know how to open the DVD drive manually. It won't open if I hold down the mouse button when I turn it on. I had problems trying to install XP in Boot Camp and had to turn off the machine. Now the windows disc is stuck inside that wants to install windows each time I turn it on. It is no good holding down the options key either.
View 1 Replies View RelatedI currently work with an old G4 Power Mac (1.25 GHz, 2GB RAM) and have to mount a FW 800 volume (WD MyBook Studio Edition 1TB) to that computer so I can consolidate to it (Avid speak for copying some data). But it doesn't mount, and Disk Utility only shows it greyed out, and there is no option to mount it like in 10.3 and following. The strange thing is, there are already two WD MyBooks Studio Edition drives connected and fully mounted. But even if I disconnect all extra drives, the one WD MyBook is still greyed out, even after reboot, which helped sometimes. I also use this drive with a 10.4.11 PowerMac G5 and a 10.5.6 C2D MBP (Unibody). Can newer Mac OS versions leave some kind of mark, so that this older Mac OS won't allow it into its system?
View 2 Replies View RelatedI just purchased an ICY DOCK for use with an Intel SSD. I already a have one of these, however the new one seems to have some new revisions. Basically this new one allows me to completely take off the cover. The old one slides forward and up, but the cover does not disconnect. The old one also, when closing, makes sure the SSD is seated correctly into the connector port on the ICY DOCK. The new one does not seem to have this "automatic" feature where when I close it.
View 3 Replies View RelatedI replaced a defective DVD drive with a new Pioneer super drive in a Mac Pro G5 which meant I had to manually pull out the tray and remove the bezel on the front of the tray so the tray will pass through the mirror door cavity.
After I pushed the tray back into the drive to install the drive in the G5 I somehow managed to jam something because the tray will not open at all now. The motor attempts to open the tray and pressing the little manual tray release (paper clip through the pin hole) doesn't work either.
