How can I connect my network path when i am switch on(booting) my machine. Actually my requirement is I want to execute a applescript when my machine is logged in. I given that script in Login items in Account Preferences. Its working fine. In my script I save a file in network path. So before running that script I need to open the network path.
View 4 RepliesI am trying to add a root path to my system for my android sdk. I created a .bash_profile under the ~/ and the contents are as below: export PATH={PATH}:/Users/phil/android-sdk-mac_x86-1.5_r2/tools export PATH={PATH}:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin However, if I type "echo $PATH" I get the following: {PATH}:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin How can I get the "export "export PATH={PATH}:/Users/phil/android-sdk-mac_x86-1.5_r2/tools" to show up as a path?
View 2 Replies View RelatedG4 MDD networked with Mini for approx. 3 years now via a LinkSys BEFSR41 wired router. Ethernet cables are CAT6's with gold-plated ends. Did an erase/install (+ updates) of Panther on G4. ISP is Comcast Cable. Just upgraded my Motorola modem from Surfboard 5100 to SB 5101 yesterday. My network settings are ok...file sharing is turned on...I can ping each 'puter from the other (showing my connection is good).
I have internet access (showing that the router is still good according to Cisco). Now, however, I can't even bring up the window on the G4 asking for my pw....all I get is connection failed, no response from the server. From the Mini, I get Unknown User, incorrect password or login is disabled. I haven't a clue what the problem can be. Everything I do daily depends upon the network connection.
Have recently done a clean install of Lion onto a Mac Pro that was running Snow Leopard. Upgradede to 10.7.3 The Lion Mac sits on an office network of several macs running Snow Leopard and a Network Shared HDD. In order to gain quick full access to the other computers we have been using "connect as" then inputting the macs registerred user administrator details, we were able us access to the full Mac and it's currently mounted hard drives. Since installing Lion I can see and fully access the network share which only uses guest access, see the Other macs in finder, add to their drop boxes but not connect as a registerred user to access one of the snow Leopard machines. I get a pop up. Spinning wheel, and eventually a timeout. Can't even cancel this action as it comes up greyed out. Oddly the other macs can still log into the Lion machine. No joy so far toggling network preferrences and I'm pretty sure it's going to be a setting I have missed, So far have had not joy looking online or playing in seeing why it would now not be able to connect as before.
Info:
Mac Pro, Mac OS X (10.7.3)
I have a home network running 3 PC's(with XP) and 2 Macs (with Tiger OS X 10.4.8). Mysteriously one of my Macs(MacMini) refuses to show a Network icon in the Finder sidebar? I have used the Go > Network menu to try to get a Network icon, but this does work. Yesterday I did a scheduled Mac OS system update, and it seems that since then I have not been able to see/get a Network icon in my Finder.
Has anyone else experienced this problem? PS - I am able to use the old 'GO > Connect to Computer' method, then type in the smb://myOfficePc, and access shared files on other PCs on the network. So networking is configured properly on this MacMini.
What i did was open the ipod through mycomputer (windows XP) and cut the folder that contains all my music and pasted it into mydocuments so i had full amount of memory on my ipod to use it as a memory device. I gave it to my friend to put some videos into my ipod again through mycomputer. He didnt allow the ipod to sync on his itunes. Now i have it back i plugged it into my pc and my itunes couldnt pick it up and neither can mycomputer. I left it plugged in and restarted my pc when it booted up i opened itunes and it was sort of froze, after leaving it for a minute or two my ipod cam e up on itunes but it said it was corrupt. I ran the restore over night as it was taking along time and when i cam back this morning it was still doing it! Whats wrong with my ipod?! is there any other way to system reset it? do you think my mate should have synced it with his pc?
View 1 Replies View RelatedI was able to access this specific website for months using my mac - both on firefox and safari.
Recently, it won't let me sign it. It just loads for 5 minutes or so then gives me a network timeout error. However, I am able to access the site on internet explorer using my PC.
So i decided to update my machine to 10.5.5 before I pushed this out to everyone. The main problem i've seen so far is with a failed login using a mobile account that is bound to active directory.
My machine is currently bound to AD and i have a mobile account. When I start up the machine and attempt to login with my AD account, it fails. The only time the login works is when i unplug the machine from the network and log in. Everything in directory utility shows green light that i'm still bound to AD. At the login screen, I also have a green light saying network accounts are available as well. The only accounts that work are local accounts.
Anyone else experiencing this and what have you done to cure it?
Up until Friday, I had a Linux server in my office that among other things, served as a remote login using NXServer. The thing I liked best about NXServer was that all of the data was sent over ssh on port 22. This meant that along with the security of ssh, I also only had to open a single port. The Linux server has been taken offline and everything moved to a MacPro.
The only thing I don't have setup is a way to remotely login to my network. I know I can still log in with ssh but I would like to be able to run a GUI when I log in. What's out there that will allow me to do this? I know about VNC and have used it in the past but it lacks the single secure port option (I believe).
I bought a new iMac 24" about a month ago. It runs Mac OS X Snow Leopard (all up to date). So I used Microsoft Messenger for Mac from the first day I bought it. Yesterday I installed Adium. So everything went well yesterday. When I went to sleep, I closed all apps from the background (Command + Q),And put the iMac on sleep.
Today I tried to use Adium and it won't log-in. It says sometimes "Retreiving buddy list" or some problems with the network (of the MSN). I tried to used Microsoft Messenger for Mac and it says something like "Service not responding or no network connection"..I HAVE FULL NETWORK CONNECTION (Plug-in straight to the router) I tried already reinstall everything, reset the router, reset the computer, Changing the port of Adium to 80 (I brought it back to default later)..I also installed OniX and clean the data with it, it still have this problem. I've done everything I can to solve it, but I still can't figure it out.
when I open my Network in System Preferences, "Network settings have been changed by another application" pops up and every time I click Ok, it pops up again, not letting me be able to access any other option in the Network window. The wireless icon has disappeared from my top bar and the only way I have managed to get online is via my ethernet cable. I have had nothing but problems since I started using my O2 Wireless Broadband dongle and I've noticed that behind the "Network settings have been changed by another application" notification, I can seen the Dongle has appeared as a new network connection option... but was never there before today (have been using the dongle for two months now)
View 4 Replies View RelatedI cant figure out how to make my network require a password when u log in. For example i have a i-phone i would like it when i log in to my mac, that it asks for a password. so how do i do that?
Info:
MacBook Pro (17-inch Early 2011)
We upgraded our lab from 10.6.8 to 10.9.3. Preserving our settings and bootcamp by simply upgrading. After getting nearly all machines sorted out with active directory we are still having a problem with 2-3 machines with network user accounts being able to login. If no local home folder has been created prior to upgrading to 10.9.3 then the user cannot login, the login prompt dissapears then re-appears.
Here is a run down of the set-up.
Our settings force network users to have a local home folder on the local mac that they are logging into.
Mac OS X server is 10.6.8.
Active directory server is 2012 R2.
Network users without a pre-created home folder on the local mac prior to upgrade cannot login. The login prompt dissapears, then re-appears. No login.
Computers are managed with workgroup manager, as well as apple remote desktop. But no settings are applied, and no login scripts are being run.
Also I have noticed something concerning Mac OS X 10.8.5 and up. And that is in the active directory settings, if you bind to a domain (using active directory and not LDAP), lets say for example:
mydistrict.maindistrict.net
And you go to add your local active directory district to the Authentication/Contacts search policy eg: Active Directory/mydistrict.maindistrict.net
it will only show: Active Directory/mydistrict/alldomains.maindistrict.net.
It shows a list of all domains for the forest. But it also adds the district that you bound to as the search directory?
Let me use a precise example using actual names.
Bind to local district: pineville.ketsds.net
Now in search policy on 10.8.5 up to 10.9.3 it displays possible search domains like this:
Active Directory/PINEVILLE/pineville.ketsds.net <- The domain we want.
Active Directory/PINEVILLE/all-other-domains-in-forest.ketsds.net <--Which is fine.
Which is all fine, but when we select the local domain for authentication, and contacts search it adds it, but in the overview it says that it is not in our search policy even though it is.
On Mac OS X versions below this (10.6.8 and down, cannot verify for 10.7 as we do not have systems with it) it displays the search domains as:
Active Directory/pineville.ketsds.net
as compared to this on 10.8.5 and above:
Active Directory/PINEVILLE/pineville.ketsds.net
As well as all the other domains, and when you add the local to the search policy it does not give the error that it is not in your search policy. Is there anyway to make this happen on 10.8.5 and above? We have tried everything. Network accounts will login even though it says this, it is just annoying.
Last question is on one computer that we upgraded, we had a problem with the network accounts. Tried deleting the .plist for network preferences, and the Directory services folder as well as the Open directory folder and now it create the open directory folder as locked and any changes made with the directory utility in the search policy is immediatley reverted once we hit apply.
Summary of questions:
1.) Network users cannot login without local folder created prior to upgrade.
2.) Mac OS X 10.8.5 and above does not correctly add Authentication/Contact search policy domains as it does in 10.6.8 and below.
3.) Active Directory/Open Directory Authentication/Contact search policy settings keey reverting after applying. (Happened prior to deleting .plist files and AD/OD folders in /Library/Preferences)
Info:
iMac, OS X Mavericks (10.9.3), Network Login Problems, 10.9.3
I have a MacBook Air that I set up to connect to a shared drive on our university's network. I'm able to connect to it manually just fine after I've logged in, but I keep getting the following error every time I login: "Connection Failed: The server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again."
Along with this comes a "?" in my dock, indicating the "share" drive cannot be found. I'm assuming I've pointed Leopard to an incorrect alias or something while I was figuring out how to connect to the share drive. How do I remove this instruction so the error message will just leave me alone?
I recently clean installed 10.5. I setup iChat with both AIM and Google Talk. Everything was running fine until now. When I start up iChat, the program logs in and out really fast until I receive this error message. "Could not connect to AIM... You have attempted to login too often in a short period of time. Wait a few minutes before trying to login again." This happens over and over again.
View 1 Replies View RelatedOne day I could log in to any site using firefox, the next I couldn't log into anything. I type the password and username, when I click on "log in" nothing happens. It says "done" at the bottom left, but nothing has happened. Safari works fine. I would just get by, however after creating a website in IWeb I discovered anything FTP related will not work.
I have tried lots of different FTP clients such as (Transmit, cyber duck, firezilla, cross ftp) but nothing works. The passwords etc are all correct as they work on my mac at work. The only change I've made is installing little snitch, however nothing is restricted related with anything that would affect the current problem. I have tried usual suspects such as deleting cookie, erasing private data etc.
I am trying to set login policies for network users on a 2008 Mac Pro running 10.7.3 and failing miserably. Let me start by saying that I am doing this successfully with 6 other laptops and another Mac Pro (2011 version) with absolutley zero issues. However no matter what I do I cannot seem to get this 2008 Mac Pro to work. The system in question is connected via WiFI (as are some of the other systems). I am using the mac address of the WiFI (as I am on the other systems) and have tried managing this system individually and in a group each of which fail.
View 1 Replies View RelatedI have a problem with Network Users defined on my Lion Server accessing the server through VPN or Profile Manager (via Safari) ... I keep on getting authentication errors. Is this because they are network users or am I missing something else?
This works: when I logon to my Lion Server with either local or network users everything seems to be OK including home directory synchronisation.
I tried the following for VPN:my local server account can logon to the server (ie my secret key, user account/password combination are OK ("chap peer authentication succeeded for ...")when I try the same with two of my network accounts I keep on getting authentication errors (VPN) but I'm sure I use the same userid/password combinations as above ("chap peer authentication failed for ...")
I get similar results when I access the Profile Manager (url..)my local server account can logon on to the Profile Manager and sees as all the informationwhen I try this with one of my network accounts (which has devices assigned) I keep on getting 'incorrect user name or password
Info:Mac mini, Mac OS X (10.7.3), (Server)
At my uni campus they have wifi everywhere, but when you connect to it (which my mac does automatically) you have to go in through a login page before you can use it. How can i get it to login once it connects to the wifi (i do use other wifi connections which dont require login). There is no wifi password (just the login page). Other than for ease of use, the other reason i am doing this is because i am setting up my cam to take pictures of a thief if my mac were to be stolen (then upload to ftp). The more auto connected internet - the better.
View 1 Replies View RelatedI upgraded to 10.9.4. Now, I can no longer log in to "network accounts". I am lucky in that my school district gave me administrator access, so I am currently logging in that way. Big problem though- the permissions on EVERY SINGLE FILE AND FOLDER are set to read only, so any time I want to access anything, I have to change the permissions on the folder/document. I have tried doing this en masse to no avail. How to log in to my original account so I can function the way I did before 10.9.4 hit.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I just used Migration Assistant to move my files from my iMac to my new Macbook Pro. I didn't know about the Filevault problem so when I tried logging in, I got the error message and I am unable to login to my account (the only one on the computer). The support page says to make a root user, but how can I do that when I can't even log in to my account. I dont have a disc copy of Lion I can use to start up with, only a copy of 10.6.
Info:
MacBook Pro
I am running Snow Leopard on a MacBook Pro. For some reason when I went to install a program upgrade it wouldn't take my password. So after a lot of mess I finally put in the install DVD and changed the password. Problem is that now every time I start up the computer I have to log in. Used to be that if I shut down I didn't have to log in when I started it up again. Now it always asks for the password.
View 4 Replies View Related I cannot login to my computer. It is giving me the option to login using my apple ID but that doesn't work either!
Info:
iPod shuffle
I have a G5 with a PCI N card. It is an Encore ENLWI-N model.It's been working fine for the past couple of months that I've had it, but suddenly it can't connect to my network. By not connecting, I mean in the Ralink Utility it shows the different networks in the area, and shows their encryption type, but when I double click on mine, enter in my password, it doesn't connect. I've tried restarting G5, restarting router, taking off the password and then trying to connect, but it still won't connect.
My thoughts are that since it shows the networks in my area, then it can't be the actual Wireless antennae, since it's finding the networks, right? And since I haven't made any changes in the past few weeks to my network (Other than to troubleshoot this) it can't be my router.
ssh login from my 10.6.2 mac to a linux system is extremely slow -- about a minute to get the login prompts. In comparison, ssh login to the same linux machine from putty.exe on Windows XP is almost instantaneous. I have tried adjusting the parameters on both client and host, without much improvement. However, the "1" protocol level seems a little faster. I have setup the keys ("2" level), and that works (without need for pasword), but is still very slow.
I installed putty from macports onto the mac. I got it to work using the "1" protocol level, but it is just as slow as from the terminal command line. All of the above tests were done on a local network with addresses like 192.168.0.102, so I don't think DNS is a factor.
I have a Macbook Pro running OSX.4.11 that has been flawless for the last three years until last evening. The MBP will start-up, the screen is a light grey, the apple icon comes up, the gear at the bottom is spinning, and spinning, and spinning, and then the screen goes to a light blue and fades, it sits there, then the login screen comes up, I login and then it just continues to sit there. I have tried soft re-boots, resetting PRAM, and all the usual steps that I can find. If anyone could assist with their expertise,
View 2 Replies View RelatedGot a new 13" MBP yesterday ? loving it, but I'm having trouble connecting to the office network. I'm connected to the office wi-fi fine, but the MBP isn't seeing the other computers on the network. The rest are all PCs running Windows 7, and they can all see each other fine. When I click into Network, the folder is empty.
View 1 Replies View RelatedI have two macs and strangely one mac is unable to connect to the internet via airport while the other one can via airport. What gives?What I'm observing is that when I open up Network Preferences in both macs, the Airport says its connected on the working one while it says no IP Address on the one that's not working.
However, when I change locations so that both macs have the same locations, the one that's not working says, Self-Assigned IP, yet, still no connection.One more thing, I also notice that in advanced settings under TCP/IP, both macs have two different IPv4's.
I'm a mac noob. Actually I'm pretty technologically challenged full stop. But I got a mac about a month ago. There's not problem connecting to the internet, it picked it up straight away. However I live in a house full of windows computers which are all wirelessly networked. Sometimes I can connect to them (for no rhyme or reason) and sometimes I can't. I don't particularly care that I can't reach them but I need to be able to connect to my printer. I just plugged my printer straight in the USB and it worked so they're compatible.But my network and computers aren't in the side bar of the finder at the moment. I try clicking "go" and then "connect to server" but I have no idea what my server address is. Is it my IP address or what? as I said I'm technologically challenged.
View 6 Replies View RelatedI have recently upgraded my wireless network to N+ using a Belkin Modem Router. Security is WPA2-PSK, and MAC access is disabled. All MacBooks (Leopard & Tiger), PCs (XP) and iphones connect without any problem, however my daughter's PowerBook G4 running OS X 10.4.11, and with the most recent Airport software, can't connect to the network. The password prompt when selecting the network only allows for entering a WEP password.
View 13 Replies View Related