OS X :: FW800 WD Studio Turbo Drive Not Working As Startup Disk
Mar 23, 2009
I have just purchased a WD Studio Turbo extarnal/portable 320GB drive to use as a back-up and spare start-up disk. (I normally run Disk Warrior from an external.)
I have backed up my Macintosh HD to this WD drive using Super Duper and Super Duper indicates that everything has been copied ok.
However, when I plug in the FW800 cable to my MacBook Pro (old version) and restart holding down the Option key it doesn't show up as an alternative start-up disk.
View 10 Replies
ADVERTISEMENT
Jun 2, 2012
I wasn't sure if it wouls be a bad idea if I wiped the interal hard drive while I'm booting from a recovery disk, then made a RAID 0 with the internal drive and my FW800 external drive. I'm nearing my max for the internal drive. I have a second FW400 drive backing up with Time Machine. I was hoping to just wipe, make the raid volume, and then restore from the Time Machine backup.
I guess even before that, my FW800 is not working in Lion. I reformatted while connected by USB, reset power management, and reset PRAM, but the firewire bus panics and takes out the Time Machine on FW400 as well. Is there a fix for this somewhere that I'm missing? I bought the FW800 drive for the above reason, only to run into a wall trying to make it work. I really don't want to do a RAID 0 with a USB connection.
I'm not going to try setting up the RAID 0 until I get the FW800 drive working reliably, but I was hoping to kill two birds with one stone.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
View 2 Replies
View Related
Feb 22, 2010
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies
View Related
May 28, 2012
How do I clean my start up disk for more space? I have I cloud but don't really use it.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
May 20, 2010
So I am well on the way towards my 27" iMac. I have just finished transferring my files, work, backups and media from ext4 hard disks to hfs+ (via a combo of an OSX VM for disk util, and removing journaling/file-copying/re-enabling Journaling under ubuntu and the VM.
This has me left with 1.5TB and 2TB HFS+ disks and my old dual bay USB enclosure (an Icy Box). I now need to start looking for a good FW enclosure/s to home these two drives. I have had a look about and the Icy Dock dual bay (supporting raid and also JBOD - important for this) looks like a winner (waiting on techies to answer me about putting drives with data on them in the enclosure in JBOD as I dont want to lose data).
Are there any other options (most of the posts relate to single drive and/or supplied with disk enclosures). I really want something that is FW800 and lets me drop two disks in and just use them.
I may put up a wanted to see if someone has unused enclosures for sale (perhaps where they have removed the disks and put them in their shiny Mac Pro?)
View 1 Replies
View Related
Dec 7, 2009
I may soon buy one of the newer generation iMacs that drop the FW400, includes 800 only. On my current Mac, I have a FW800 drive and a FW 400 drive. I use the 400 for time machine as speed is less important. My current iMac has a 400 & 800 connector. I have tested connecting the 400 to the 800 drive via daisy chaining, so everything is pulling off the 800 connector, so this assures me I can do this with the new iMac. However, Does it slow down your 800 drive when it has a 400 chained off of it? Or, if the 800 is the first drive connected to your iMac, do you maintain full speed?
View 5 Replies
View Related
May 16, 2010
I just bought a 640gig Samsung 2.5 inch / 5400rpm drive and threw it in a FW800 case from Other world computing. Running some test using the QuickBench 4 and AJA system test shows me that this little bugger is almost as quick as my internal drive on my MacBook Pro (Model number: WDC WD6400BEVT-00A0RT0). How can this be???? I did a varity of test with different file sizes and the Samsung get 70 MB/s vs about 84 MB/s for the internal drive.
My internal drive is pretty full vs this external drive that is currently empty. I do a lot of video work / large gigabyte files on the drive so perhaps I have a defrag problem? I really expected my internal drive to blow the FW800 connected Samsung out the water?
View 1 Replies
View Related
Jul 10, 2008
i recently buyed Drive Genius 2 but i missplaced Boot DVD is there a way to start Drive Genius from another startup disk? i whan to make defragment of my hardware but i need to start the problem from diferent disk. Yes and you all wandering why i whan to defrag my HDD, becose this is the solution for boot camp to create a partition. Im tring now to create a partition using boot camp but i cant it pops erors, but read some where that when defraging a partition it solves the problem
View 4 Replies
View Related
Jun 2, 2012
I am thinking about how to add extra storage to my macbook pro, and thinking that the simplest way would be to get a WD 2T and boot from that as a matter of course. I would use the internal drive for back-up. The reason for this is that the 1T internal is getting full. The other option is to replace the Super Drive (DVD/CD Drive) with a 750G, and have the dvd/cd drive external. What is better?
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 3 Replies
View Related
Jun 29, 2012
I am getting error message saying startup disk is full. Can not save a scan. Looks like my hard drive is not even close to 30% full.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 26, 2014
For some reason FCP keeps crashing when I launch a particular project; just this one project! Others don't seem to have this issue. Sometimes it does get as far as loading all the sequences but as soon I I try a play any it crashes! I can say except copying the report below: By the way it mentions plugins but I don't believe (as far as I know) that I have any 3rd party plugins installed.
Process: Final Cut Pro [705]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 7.0.3 (7.0.3)
[code]....
View 8 Replies
View Related
May 16, 2012
how do i partition my mac hard drive if my startup disk is full and i have more space
View 1 Replies
View Related
Jun 17, 2012
How to transfer files to an external drive when start up disk is full?
Info:
MacBook Air, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 26, 2014
How do I clear space on my startup disk and hard drive?
Info:
MacBook Air, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Sep 28, 2009
I have two new G-Drives attached via FW800. One drive keeps unmounting by itself. All of a sudden, I get a screen that says "The drive has been removed, you should always make sure to eject the drive properly from the etc etc.." First time I have ever had this problem. I have tried the eSATA connection and FW connection with the same result. Regardless on how I connect the drive, linked or direct. It's brand new. Could it be bad?
View 2 Replies
View Related
Jan 9, 2010
I bought a MacAlly GS350SUAB hard drive enclosure for the firewire 800 port. Before I made the purchase, I looked around for some FW800 drive xbench scores and found a few results:
[URL]
When I ran the xBench disk test on my drive, I was unimpressed. They weren't much better than when I plugged it in using the USB port.
Uncached Write34.81 MB/sec [4K blocks]
Uncached Write43.62 MB/sec [256K blocks]
Uncached Read18.11 MB/sec [4K blocks]
Uncached Read46.06 MB/sec [256K blocks]
I thought maybe xBench was sucking, so I timed how long it took to write a 831MB file to the drive using both USB and FW800, and it was actually faster (marginally) on USB. FW800 took 30 seconds, while USB took 28. Something doesn't seem right. Does anyone have any thoughts on why this could be? I do have a FW400 audio interface hooked up, but that is of course plugged in to the FW400 port and shouldn't make a difference. The hard drive I'm using came out of a Seagate FreeAgent. Is it possible it's just a really slow drive?
View 8 Replies
View Related
Dec 7, 2007
Could anyone recommend an external (FireWire 800) Hard Drive that they're using without issues with a Power Mac G5 (mine is a Dual Processor 2.3)?? I bought a couple of WD My Book Studio Edition but have no end of problems on FW800, and looking around here so is everyone else. LaCies seem to have similar problems, plus my own experiences in selling these and seeing FW ports falling off the enclosure's board, etc., puts me off them. Maxtors seem to have different issues and the new brown and orange Seagates are too fugly to even consider. So, anyone recommend a solution (250-500GB) that works fine with FW800 on a dual PMG5??
View 9 Replies
View Related
Dec 23, 2010
so I am in search of a new 500GB-1TB External Drive for Time Machine, and it has to have FW800 as well as USB 2.
I was thinking of getting an external chassis and buying my own hard drive, has anyone purchased a good external chassis with both ports, or a all in one drive that is worth the money?
View 6 Replies
View Related
Dec 31, 2009
I bought a brand new Seagate 400Gb hard drive for my PowerMac G4 MDD FW800. I installed it in the back bay, as a slave drive. When I power on the Mac, I get a blank grey screen. The original hard drive with OS 10.4.11 is set as the master, so I don't know why it won't boot properly. I've checked for bent pins, and I don't see any obvious ones, so I'm completely confuzzled.
View 1 Replies
View Related
Aug 11, 2010
First I wanted to upgrade my new mac mini with a Momentus XT but now I'm thinking about getting a "real" ssd + a FW800 drive for storage to have the huge speed boost of the ssd drive. Does anybody have this combination in his mini? What I want to know: How is the performance like of the external drive connected to FW800? Is it comparable to a standard internal hard drive?
View 11 Replies
View Related
Mar 19, 2010
So i just got a powermac g5 and cant figure out how to eject the disk drive. im using a non apple keyboard so the shortcut wont work.
View 6 Replies
View Related
Oct 6, 2010
I got two questions.
1) What would you guys say the best bang for your buck FireWire 800 is? I hear a lot of differing opinions on this one, so I'd like a couple suggestions, need over 500GB though. 750GB and up would probably be the best.
2) I've got 2 PATA hard-drives from my old Windows PC that crashed, what would you guys suggest doing about getting the data off of them? Most of the hard drive kits I found are for SATA, and the one I found for PATA was like $50 at Best Buy, I just want to get the data off these hard drives and junk 'em. I don't need bells and whistles and fancy enclosures.
View 2 Replies
View Related
Nov 12, 2010
This is in regards to the 2010 mini. I have been reading up on SSD, Hybrids and FW800 with a 7200. What is the easiest AND most effective/cost effective solution? If I went he FW800 route, can I use the same drive as my data storage drive? Will there be enough headroom to run the OS over FW and use the drive to stream movies playing in another room on Apple TV2 simultaneously? Will this give me a performance increase over the internal 5400 if I use the external 7200 for everything over FW800?
That is where my thoughts about the hybrid come into play. I know I can stream the iTunes content over USB2, which I have at the moment for the big drive. I would need to go buy an enclosure with FW800 to run it as a boot drive. I could use that same money and go get a 500GB Hybrid drive and install myself and leave the USB2 as data only. If the install is painless but tedious, I might just do that. If the FW800 route would be robust enough to run the OS and stream data to other devices simultaneously (ie use it as I would the regular internal drive), I might just do that and wait for SSD prices to come tumbling down and do a bigger internal SSD in the future.
View 3 Replies
View Related
Aug 25, 2014
I bought Final Cut Studio 2 with Final Cut Pro 6.0 a while back and I need to reinstall it after recent computer issues. It have installed and reinstalled once previously, but now the original installation disk tells me "Could not install the software because there was no software found to install."
Info:
iMac, Mac OS X (10.6.7)
View 1 Replies
View Related
Jul 17, 2009
So so annoyed right now. Today my 12" G4 powerbook started to become slow, lots of spinning wheel, delayed menus etc. I checked file permissions, rebooted and it just kept on getting slower. Eventually it wouldn't get past the white apple screen.
I booted off the Tiger DVD and ran disk utility to fix and repair permissions again. It wouldn't let me repair the disk as I kept getting this error:
'Repair volume failed with error could not unmount disk'
I had to reboot again, and eventually my hard disk no longer appears in Disk Utility. I tried to boot into safe mode and get this:
'"I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus"
So now I pretty much can't do anything with it. Failed Hard Drive?
View 5 Replies
View Related
Feb 18, 2009
Yesterday I switched on my macbook (Leopard) and got the flashing question mark. Ran all the resets and booted with disk utility which encountered an 'Invalid B-tree Node' when attempting to repair the disk. Additionally, the SMART status was verified.
I ran DW 4 last night, and performed the hardware tests which reported that the disk was operating like normal. The majority of my media files and additional work is backed up to my Time Capsule but I still have a folder of papers that are relatively new, and wanted to retrieve. While DW managed to reconstruct the majority of my drive (there seemed to be 15g missing - but it's just music files) including this folder, it couldn't replace the disk, as it encountered 'Serious Disk Malfunctions'.
So, via the Disk Preview I want to transfer my saved folders to my TC, but I don't appear to be able to locate it (via ethernet) through DW - even if it's connected when I boot up in DW. So, first request is: Can I connect to my TC to transfer across in DW's preview?
Second is: What are my options if DW can't replace? Do I need to take it into Apple and get a new HD (it's out of warranty)? It's possibly worth noting that I'm a student and have absolutely no money - so cost effective options are a bonus!
View 1 Replies
View Related
Jun 24, 2014
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
View 1 Replies
View Related
Feb 28, 2009
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
Information:
Mac Mini
Mac OS X (10.5.8)
View 5 Replies
View Related
Jan 1, 2008
I have 2 internal Serial-ATA disks:
Both were checked (with Disk Utility and DiskWarrior) and are OK. But only one of the two disks shows in the Startup Disk list in System Preferences->Startup Disk.
PowerMac G5 / OS X (V.10.4.11)
3GB memory
View 7 Replies
View Related
Jul 1, 2014
Every time I try to restart my computer on my Hard Drive I get this message "Startup disk could not gather enough information on the selected disk". As of right now I am running my whole computer off of a 16GB flash drive that is quickly running out of memory. How do I fix my Hard Drive without losing all 150GB worth of data. I am running off of OS X 10.6.8 and have another iMac that is working fine.
View 2 Replies
View Related
