I've bought a Pioneer 116DBK DVD burner to use with a few of our Macs. I've set it to master and mounted it in a Pluscom 5.25" USB external enclosure, but its not being seen my OS X at any level.
View 8 RepliesI have just bought an older G5 PowerMac.....1.6, 1.25gig Ram. It came with Tiger and DVD's were recognised and dvd player started. I added another hard drive and installed leopard on this drive.....now DVD,s won't show u at all. The superdrive see's cd's ok and I can rip them to itunes but dvd's..
View 1 Replies View RelatedI have a creative mp3 player, it shows up in the USB list , but I cannot access it or click and drag files to it like I used to....It does not show up on the desktop anymore or in iTunes as it used to ?
View 1 Replies View RelatedMy macbook pro 15" wouldn't turn on a couple of days ago but yesterday i turned it on and everything seemed to work. Then i realised that the iSight and bluetooth weren't working. Apart from that it was fine. I then decided i wanted to use windows through bootcamp but when i tried to start it up it just black screened and didn't boot up. I then realised that it might be my graphics card so i went into system profiler and found this. I then tried both the PRAM reset and a SMC reset it didn't fix it. Is there anything else i can do? Or should i just take it to apple?
View 10 Replies View RelatedIve just gotten a 2nd hand eMac G4 800Mhz running OSX 10.4.1 when I put a dvd in to play nothing happens - the appliactaions folder says I have a dvd player (occupying 38 odd MG of space) but when I try to opn it i get this message �There was an initialization error. A valid vieo device could not be found for playback (-70017)
View 14 Replies View RelatedJust tried to set up my Airport Express but it shows a flashing yellow light (meaning it isn't connected to my router) and it isn't even recognised by Airport Utility!
View 1 Replies View RelatedI have a late 2009 macbook pro with SL and i tried to put windows 7 on a bootcamp install. All went well till right at the end, i inserted the OSX disc as told so that i could update drivers etc..but the disc just makes a repetative 'dung...dung...dung' noise then ejects..
View 2 Replies View Relatedonly just got my new imac,and when i insert the SD card to trasfer my photo's nothing happens! i can't find the sd card anyware on my desktop,am i doing something wrng?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
I don't have a driver which will allow a canon Laser Shot 2900i to install a printer I have just bought. I've been on the canon software website which told me that the mac osx was compatible. The imac OSX 10.2.8 has recognised the printer. Is it possible that you could find me a compatible driver?
View 4 Replies View RelatedI was told my date and time was pre 2010 ?!?! checked and yup it was showing Jan 1st 2001.. set the date and time manually charged the iphone via USB then went out.Tried to text my wife and noticed her number was no longer recognised (Number only showing, not name) and that all texts sent this morning where appearing at the bottom of my text list not the top as normal (Figured this out as the iphone had synched with the messed up time and date on the Mac). I re entered her number and when I try to call it it tells me the number is not recognised??
View 7 Replies View RelatedOk so I've got a MBP bought back in november, with Mac OS X Leopard. My problem is, when running windows, Bootcamp 2.0, no mic will be recognised. Neither the built-in, nor any one you connect will work. Doesn't matter if it's usb or jack, it won't work (even though it's recognised).
I'm working with Realtek HD audio drivers, as I didn't even have sound after installing Bootcamp.
I have a mini, about 4 years of age, since the update to 10.6.4 when the mouse is attached to the keyboard it is nor recognised on startup unless I unplug it and plug it in again, when it springs to life. It is not an apple mouse, just a cheapo boa usb mouse. The keyboard (aluminium, same age as mini) is plugged into a powered usb hub. I have played around a bit and even when the keyboard is plugged directly into the mini the mouse is not seen at first. However, when the mouse is plugged directly into the mini there are no problems.
I have swapped the mouse with a variety of other mice including one from an ancient imac, it makes no difference. Is this a symptom of possible keyboard failure to come, or something else?
My Macbook will not boot up. I am now faced with a plain grey screen with no apple logo, chime sound or activity wheel appearing.
Like most Macbook users I know, I rarely go through the booting up process from day to day use unless the System Updater requires a restart, but this time there was a different reason for me restarting the system.
When I was expanding an archive with Stuffit Expander, the app froze up. I went and deleted the archive file knowing that it was corrupt, but I did this too soon before the app had a chance to close down properly. It became stuck as a process that couldn't be closed down. Its dock icon didn't have a 'Force Quit' menu option so, I chose to perform a restart.
The Macbook went through the startup process but took a very long time. (I guess after reading around the forums this was fsck attempting to scan and repair the potentially damaged hard drive). I mistakenly performed a hard reboot thinking the system had hung.
The second time, it displayed the apple logo and wheel for about 2 minutes before showing a circle with a line through it and no further activity. When I rebooted again the apple logo and wheel were displayed with the hard drive activity audibly in a repetitive on and off state. I left this for about 15 minutes before deciding to turn it off. At the present moment it starts up to a plain grey screen as mentioned at the beginning. I tried experimenting with removing the extra 2gb memory module but there was no difference with or without it. I tried resting the NVRAM with Option-Command-P-R but all I got back was the startup chime (i.e. the muted volume I had it at has now reset to the default level).
When Option is held down on booting, the mouse cursor is visible over the same blank grey screen. No volumes show up. I have selected the Finder Preferences option to hide all volumes from showing up on the desktop, but I doubt this would affect volumes from showing up on the boot up screen.
I have tried booting from the 10.4 CD that came with the Macbook and the 10.5 (retail) DVD. The 'C' or 'D' keys do not have any effect either.
I think my options now are either to try and obtain a firmware reset CD which might make it possible to recognise volumes again, or there's the possibility that I'll have to get a new hard drive. Can you suggest anything else I might be able to try?
On the subject of hard drives, if it turns out that the Macbook's hard drive is beyond repair and I need a new drive I only have a caddy for 3.5" PATA drives which I use for Time Machine. With an appropriate 2.5" SATA caddy is there any way I could access the filesystem in Windows? How else could I format the drive to the correct FS?
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies View Relatedmy mac has a pioneer dvd drive in it and it wont read my dvd+r dl and I am wanting to burn a mac os 10.5.dmg to it and install 10.5 but the dang thing is ejecting it. So what should I do to get it to work get the external dvd and run it from it or get a external hard drive and try it that way.
View 6 Replies View RelatedI have recently bought a MacBook Pro (10.9.4) with a 128 Gb solid state drive. My intended backup strategy is to have all my documents on an external 1 Tb USB3 drive (i.e, not in the MacBook Pro) and to back up that drive AND my Macbook (system, applications, mail etc) to another, powered 2Tb drive. I’m assuming I’ll have to partition the 2Tb drive first, by the way.
Info:
MacBook Pro, OS X Mavericks (10.9.4), 2.9 Ghz Intel Core i7
if you'd be so kind...I've had my iMac for almost a year, but have yet to make the big switch totally.
I am getting an external drive today to store music, photos, etc. Simply enough to set them up and have items go directly to it instead of internal drive? I know it is, just want peace of mind
MY big ?...I have lots of music on itunes on my pc...can I take it off the pc and out onto the external to use with my imac? Still have to do two separate partitions, or? Or, easier to get all my music onto ipod, then use Expod to download to the external? Once it is all on the external, how do I call it up, easily? itunes automatically search to play music from it and save new music to the external or do I have set it up or assign things differently?
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
In other words... I have moved my music library to the external hard drive, as per an earlier thread I read here on the forums. It worked like quite well. Now that it is working perfectly, I am having a hard time leaving well enough alone. It is never a good idea for me to think too much...Can itunes be installed and run on/from an external hard drive? If so, how?
View 15 Replies View Relateda G_TECH external 500 that is not being acknowledged on the hard drive (I see it on Disc Utility but cannot access anything on it and it will not show up in my finder) I tried to click Repair Dick but it shows this message in red:keys out of orderI then tried to verify it (granted I really do not know what repair or verify would do ...) and it said it was unable to read it.I assume (but could be wrong) that since I can see that my hard drive exists in disc utility there IS a way to take the contents from that disc and save them to a different external.I have a WD passport and would like to drop the contents of the G-tech onto the WD so i can then wipe the G-Tech and fix it
View 2 Replies View RelatedI've not Time Machine'd in about 3 weeks. After working fine for several months, out of the blue I get this error. I think it was -61? "Get Info" said it was read only. I couldn't figure out how to make it write & read. Now, out of the blue, I can't even mount it.I'm at a loss. My iMac is on it's last legs and I'm playing with fire. I guess the first order of business is to mount the thing but it just does nothing or IDK how to force it to do this?
View 16 Replies View RelatedThis is what im trying to do. I have a macbook with 120gb hard drive. thats not enough space from my music collection. So i was wondering how to make itunes run off a external hard drive. I looked around and found was for a PC.
View 2 Replies View RelatedI recently bought a macbook pro and am making the transition from a pc to mac. It's all gone well so far, but I'm not sure what to do with my music. I currently have about 200 gb of music on my external hard drive (connected to my pc.) The internal hard drive on my pc does not have space to accomodate the files on my external.
I do not have the "Copy files to iTunes music folder" currently enabled because my internal doesn't have space. (And I like having the original music files in a separate location as I have over 30,000 songs). I don't know how to transfer my external and music to my macbook, since I will have to reformat the drive (which would erase everything on it, therefore I somehow have to make a backup either on my mac or on my pc. but what to do about the iTunes .xml file and iTunes folder on the internal pc drive??).
I have an elderly Q950 with an external hard drive with everything backed up onto it. The external drive is a Micronet ADV1000E, with a sticker on the back saying it's Macintosh or PC compatible. I also have an iBook laptop, & PC Dell Inspiron 1300 laptop. As I have the 2 laptops, the Quadra hadn't been switched on for maybe one year. On the weekend I tried to get it to boot up (with & without the external drive switched on), but all it does is display a grey screen with an image of a 3.5" disk with a '?' in the middle. If I start up from a Norton 3.5" disk it still can't find the external or internal drive. If I try booting up with my finger in the shift key it doesn't want to know.
1. Any idea why the Quadra isn't seeing either the external or internal drive & what can I try to do?
2. Is there any way I can connect my external drive to either my iBook or Dell? At the moment I have no cables to connect the old & new - are cables available & if so any idea where from? I've looked high & low but so far no joy.
3. Is it possible to remove the hard drive from the Quadra or the external drive & put in an external drive enclosure, then connect that to either laptop? I see there are drive enclosures available which are Mac & pc compatible. This by the way would be a major undertaking for me. I'm by no means a computer dunce but would be wary of trying it.
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.)
I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error.
I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes)
Format :Mac OS ExtendedAvailable :
Owners Enabled :NoUsed :
Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
Disk Info:
Files: 51,646
Folders: 18, 493
Free Space: 65.42GB
(etc)
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
I've got an external drive that was a Time Machine backup drive. It's at the police station as evidence for something and they will not let me take it back. However, they will let me come down and make a copy of it. I might only have one shot at this so I'm trying to think of the best way to do it successfully and quickly.
Can I just bring another external with me, my Macbook, and then copy the files from the Time Machine backup external drive to the other external drive? If so, what is the facility for doing this quickly? I'm kind of new at Macs and am unsure. I do not have an extra Mac that I can simply use Time Machine to restore to to replace it's contents.
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
My internal 1TB hard drive on my iMac is dead and I don't have the money to replace it at the moment. I have everything backed up on an external 1TB drive using Time Machine. As a workaround for the time being,Is there any way I can install the system on the external drive and use that as the boot drive without erasing the Time Machine Backups? It seems to me I would have to have two partitions for the external drive, one for the system, and one for Time Machine. But is there any way to add a partition without erasing the existing one with Time Machine only on it?
View 8 Replies View RelatedSo I bought a 2tb external drive to save space on my main drive - I copied all my movies and have been dropping a bunch of mini dv tapes onto it - but when I open the drive none of them show up
When I get info in disk utility I get one that shows I have avaialble 1.99TB of 2 TB - and right below it says 890 MB are used - don't get it
Tried the disk utility and it says they are working fine .... repair did not seem to do anything
Info:
iMac, Mac OS X (10.6.8)
I was using Mail I have set up my email again, so I don't want to lose anything currently in my inbox, but want to retrieve old messages and addresses. Running 10.6.8 OS.
Info:
iMac (27-inch Late 2009), Mac OS X (10.6.8)
