I have an external multimedia disk currently formated in NTFS microsoft format. I'd like to be able to copy content to it from my Mac and a PC so I thought to format it in FAT 32. can anyone tell me if there is a size limit to FAT32. what are the major limitations of FAT 32 vs NTFS
Information:
MACBOOK
Mac OS X (10.5.4)
I have two external hard disks, one formatted as FAT32 and another formatted as NTFS .Both cannot be seen in Finder when plug in. Only another one formatted MAC OS extended can. how to dispay my drive in the Finder (I don't want to reformat it as I have lot of contents and need to be read in my window computer.)Im running Mac OS 10.7.3 on my iMAC
Info:iMac, Mac OS X (10.7.3)
I was using my external hard drive with my mac and its formatted in the MAC HF(something like that) file system. I would like to format that external hard drive such that the file system is either NTFS or FAT32 so that I can use it on my windows partition running on boot camp. I am asking this question since I am planning to get a new HD for my mac and use the old one with windows.
View 10 Replies View RelatedI'm going to buy my first Macbook this weekend and I'm trying to get myself ready so that I don't have to waste precious playing time on stuff like this I have an external hard drive filled with music, videos and files. I would like to keep using my drive on my mac to access my files and save backups etc. The hard drive is in NTFS format and from what I understand the mac will be able to read but not write to it - which isn't what I want. Ideally I don't want to lose the content on the drive, but if I have to I could slowly copy it all onto dvds. If possible I also want the drive to be compatible with Windows so I can plug it into parents/friends/uni's computers and still be able to view/add content on rare occasions. What format should the drive be and how do I do that? (I think I can manage to do it once someone points me in the right direction)
View 1 Replies View Relatedi've installed a new Hard disk on My G5 that was before installed in a pc (NTFS), now i'm trying to format it in FAT32 in the Mac!! no way!! i don't know how!
View 7 Replies View RelatedHow to convert NTFS external hard drive to FAT32 without loosing data?
Info:
MacBook Pro, Mac OS X (10.5.8), Seagate Agent GoFlex 1.5TB
i'd like to format my lacie external hard drive with two partitions:
1. HFS+ partition as a bootable clone of my internal drive
2. FAT32 partition readable by any windows (and mac) machine
i'm creating my partitions with disk utility, but i hit a snag when choosing a partition scheme...apparently i cannot choose a different scheme for each partition.
so when i format the drive with GUID, the FAT32 partition is not even recognized by windows XP. but when i format the drive with master boot record (MBR), the HFS+ partition is not bootable...
i have a 500GB HDD which has two 250GB partitions, one which is working for time machine, and another one for storage, that one for storage is NTFS, so i can just read but not write files, which is very annoying.
Can i just reformat that partition without loosing my time machine files? I already copied the Storage files to my internal HDD, also which is the best format? I want to be able to read/write stuff both on PC and Mac
Is there a way to copy my Time Machine files to my computer, reformat that partition too to FAT32 and pass them back?
I have an external hard drive that I was previously using on PC, having attempted to use it on a Mac, it will not write to it. I've found that I have to format to FAT32, which I think i can just about manage (yes, im a girl) but my concern is, if i format through the MAC, will i then lose what's on the hard disk as the tab says 'erase'? I have a lot of images on the hard disk so am a little petrified! Any advice for this really basic question would be appreciated!
View 7 Replies View RelatedI can't manage to format my Seagate 500GB external HD correctly so it can be readable with my Macbook. I formatted like six times already in Windows 7 and XP to NTFS and still my macbook won't read it...only my Windows computers can read/write it. What am I doing wrong?
View 4 Replies View RelatedI have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
Simply looking for an application, preferably free, that will allow me to write to my NTFS external HD. I had this external as FAT32 before which was not problematic until I started downloading 720 and 1080 .mkv movies that were larger than 4gb. So I reformatted to NTFS which will accept files larger than 4gb but realized that OSX don't be got the ability to write to NTFS.
View 6 Replies View RelatedMacBookAir,1.8GhZ,Memory 4GB1600 MHz DDR3 osx10.9.3
Finder can show and open the files from the external hard disk but can not searching for the files.
I've recently converted to the Mac-side:
I'm having difficulty with my external hard-drive, here's the info on that one:Â
Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I noticed in disc utility that under the erase tab it has the option to format a drive to fat32. If I create a windows partition using bootcamp and then go into disk utility and erase to fat32 will this allow a boot into the xp drive? My xp disc keeps restarting before it gives me the opportunity to format the drive to either a ntfs or a fat so I need a way around this?
View 4 Replies View RelatedI've got an external drive (320GB) that I'm trying to format as FAT32 using Disk Utility, then create a large (as in, most of the drive) HFS partition.
The problem is that no matter what I do, it will only format the drive as Mac Journaled. It lets me select other options (Mac, FAT32) and goes through the process with no errors or warnings, but when I click on the drive it remains Journaled with a partition of whatever I just selected.
I am sure beyond the shadow of a doubt that I am selecting the drive itself, not the partition, when formatting. This is extremely frustrating. Google searches aren't turning up any clues and I don't know what to do.
I have other external drives formatted as FAT32 with a large Mac partition so I know it's possible.
I need to do this so I can mount the drive on a Windows machine.
I am using this guide to get a new HD into my PS3: [URL:...] It says that the HD I back my PS3 up to needs to be formatted to FAT32. I have an external HD that I use with my mac, its partitioned into 4 parts. I have one partition which I don't use which I want to back my PS3 onto. In Disk Utility I select that partition and I only get 4 option under the Erase tab, 4 different Mac OS Extended options.
View 2 Replies View RelatedI am in need of a data recovery app that can recover data off a Fat32 drive and save the recovered data to a NTFS drive (I use NTFS-3G). I have PhotoRec but can't seem to navigate to my NTFS external to save the data (the only drive big enough to save the data too is my girlfriend's 500GB external and it is NTFS).
Any tips to getting photorec to navigate to the drive (I am pulling from one external to another). Photorec sees the one I want to save too I just can't get it to select it. Also if there are any other programs yall recommend, I will give them a shot.
Probably about 10 years ago I was a big techie with DOS and all that, and now I seem to have forgotten how to do anything!
Two questions.
i) My iMac, which I bought last year has run out of HDD space. What can I do to extend it? I really can't work out what I have filled it up with as I have only
8.5gb in my applications folder
4.7gb in the systems folder
9.1 GB in the libary
40.18GB in the users bit (of which 32gb is music on iTunes)
Other than the standard applications I have a DOS emulator, Office and Spore.
But apparently I have used 200gb?!?!? I can't find where this disk space is being used up. Any ideas on what I can check to clear this out? I put a partition in to possibly install windows, how do I check that's been removed correctly?
Also if I plug in a USB drive to extend the memory how can I get the mac running as if this was actually the normal drive for this computer?
And question ii)
I have a PS3 which I want to back up my info on, but its on a FAT32 format. Can I format a USB HDD in FAT32 using my Mac?
How can i modify(delete,paste) the contents on the external hard disk that has an NTFS partition?
Info:
MacBook
Pro, Mac OS X (10.7.3)
I'm using an external drive through FireWire 400 on my MacBook Pro with 10.5.5. It's a 320GB with 22GB in "free space" and the rest formatted with HFS+ (used as a Time Machine backup drive). I want to setup that 22GB as a FAT32 partition to be writable in both Windows and Mac. Normally, it sounds like I'm supposed to use Disk Utility on Mac and just choose MS-DOS(FAT). Unfortunately, that choice is not presented. I can choose four different Mac-based file systems, but not FAT. Why doesn't that show up as a choice? I've tried leaving it as free space and using a PC to format it. I've tried formatting it as a Mac-based drive and using the PC to format. I've even tried installing MacDrive on the PC and using that to format it as FAT32.
View 3 Replies View RelatedI have format an External Hard disk for Mac. Can you advise how to format back to FAT32 format for Window
Info:
MacBook
Pro, Mac OS X (10.7.3)
How do i format an external hard disk for my Mac Book Pro
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have partitioned my external Hard drive into three different partitions, each of different formats. Two partitions for backing up my macbooks and one to copy to and from my windows PC. I would just like to know if in any way is it possible for me to be able to re-partition one of the partitions, without affecting my Time machine partitions, in case the need be in future.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
View 8 Replies View RelatedI'm trying to install Windows 7 on a spare disk (in bay 1). Do I need to format the disk in NTFS or MS DOS (FAT) before installing Windows 7? The computer currently tells me that the drive is not formatted for installing Win 7 on it. I had used this drive before for Leopard, cloned it to another drive (bay 2), upgraded to Lion, and erased and formatted the drive in bay 1, but not for the NTFS or MS DOS (FAT).
Info:
Mac Pro, Mac OS X (10.6.8)
I received an Acomdata 2Tb external hard drive today from Amazon and plugged it in. Time Machine popped up and I declined to link the hard drive to it. I went into Disk Utility and chose the new hard drive on the left column and went to erase. I chose Mac OS Extended. I named it and hit erase. It started going, and going..... and going... and a half an hour later I knew something was wrong.
Disk Utility was not responding and I eventually had to Force Quit. Now I cannot format the hard drive. I starts and then it stops with a disk error. I tried to run the First Aid verify and repair and both stopped after a few seconds with an error. What do I do?
Some time ago I had a problem with my iMac. Turned out my internal HD was broken so I got a new one.
The problem is that after I got my iMac with the new INTERNAL HD back, I was unable to write data on my EXTERNAL (Toshiba) HD, which until then I had no problems with. When I checked the format of it, it now says NTFS.Â
As I have more than 1 TB of data on it which would take forever to back up, is there another way to change it's status and write on it again? I was once able to do it, so I don't know where the problem is.....Â
Info:
iMac, OS X Mavericks (10.9.4)
Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
Information:
MacBook Pro
Mac OS X (10.5.8)
I'm intending on buying an iMac in a few days, just waiting for Macworld to come and go.
My question is this. I currently have 3 external Hard Drives on my PC. 2 x 360GB and 1 x 500GB. These contain MP3's, Photos/Videos, FLAC (Uncompressed Audio) respectively. Each disc is probably around 2 thirds full. They are all in formatted to NTFS.
Is there anyway that I can convert them to FAT32 without losing the Data so that the iMac can Read and Write to them when I swap them over to the Mac? (and is this even a good idea as I understand that FAT32 is extremely inefficient with volumes of this size)
The only alternative I can think off is to copy everything from the disks to the internal mac drive, reformat the USB drive for the mac and then copy everything back..
