You used to be able to select "movie properties" in the previous QuickTime 7 but that option is not available in QuickTime X in Snow Leopard
Say, you have an HD movie which is on your hard drive, but in 4:3 format. You want to change it to 16:9 which is the widescreen format, to view the movie at its proper aspect ratio. You can do this in VLC, but my question is, How do you change the aspect Ratio in Quicktime Player X?
So why is Widescreen better than the "old" 4:3 aspect ratio? I haven't seen a website/document where content is arranged 16:9, is this seriously JUST for movies? I just started using my old Thinkpad t60 again, and its 15" whcih feels allot bigger than my 15.4" MacBook Pro. who exactly needs widescreen andy why are they still measure monitors in inch wouldn't it make more sense to do a Pixel/cm^2 ?? plain cm^2 would be better as well
View 7 Replies View RelatedI have a 2nd gen MBP hooked up to a wide screen LCD (1680x1050) panel and I occasionally play games that don't naively support the wide aspect ratio and they get all stretched out when scaled to fit the screen. Is there any way to tell OS X to center the "odd" resolutions in the panel (leaving black bars) when a game wants to use that resolution? I'd much rather have a smaller picture than have it distorted.
View 2 Replies View RelatedI am using FCP X 10.1.1 on an iMac with OS 10.9.3Â
I have HD video shot in 1080X720. I realize a dvd isn't HD, but I would like to try and get the wide screen aspect. Is that even possible?Â
Has anyone who's gotten one of these tried watching a DVD or playing a game in full screen on a 30" monitor w. no scaling chip (ie the HP LP3065)??? Just curious as to whether the quality is good, I hear the scaling on some cards kindof sucks.
View 3 Replies View RelatedI have a folder of images that I would like to crop to a certain aspect ratio. I don't want to make them all the same number of pixels, I just want them all to have a 16:10 aspect ratio. Is there a certain app that can batch crop like this for me?
View 2 Replies View RelatedI am making an animation using photoshop and istopmotion. I save each drawing in photoshop as a frame. When I import the image into istopmotion it changes the aspect ratio of my picture and crops some of the top and the bottom. I have tried to change the aspect ratio of my image to 4:3, 16:9, and lots of other ratios. When I look at the document setting in istopmotion it says the aspect ratio should be HDV1060 4:3.
View 1 Replies View RelatedI have a lot of home movies that were recorded onto a Verbatim Hard Drive Recorder in a .mpg format. These movies are in the proper widescreen aspect ratio when played back on my TV, however, when I transfered them to my Mac the .mpg video files became fullscreen. I had to use MPEG Streamclip and the MPEG-2 Playback Component to create true widescreen .dv files for iMovie. However, I was forced to to do an erase and reinstall of Leopard last week and I lost the MPEG-2 Component.Â
I was upgrading to Lion though, and I had heard that the Component was no longer necessary as Lion had the capability to playback MPEG-2 files. I had assumed that Streamclip would also use this built-in MPEG-2 Component. I have upraded to Lion just today, but Streamclip cannot open any of the .mpg files claiming it needs the Component. Is there another Streamclip equivelant that can correct the aspect ratio with requiring me to buy another Playback Component? Or better yet is there any existing application on Lion that can correct the video shape?Â
How do I make the movies I download from the net Full HD or Blu-Ray. The movies that I download are usually something like 1280x550. But when I use a video converter to make it 1280x800 (the highest resolution on my 13' macbook pro) it just stretches the movie so the quality becomes worse. how to make these movies full HD or Blu-Ray and change the aspect ratio so the movie takes up th whole screen.
Info:
Mac OS X (10.7.4)
I have a 1920x1080 video that I want to crop to a 4:3 aspect ratio.
I'm working with compressor 3. Â
When I set "crop original" to "4x3 1,33:1", I cannot manipulate the cropping. It is fixed to left=240, right=240, top=0 and bottom=0.
This results in 1440x1080 4x3, that's correct. But what I'd like to do is crop the top and bottom, too, while keeping the 4:3 aspect ratio.
How do i do that?Â
When I set "crop original" to "custom" (I hope I translated that correctly), cropping left, top, right and bottom is possible. I manipulate the red rectangle in the preview window and the cropping changes accordingly. Now how do I tell compressor to keep the 4:3 aspect ratio while manipulating/zooming with the red rectangle? I don't want to calculate the cropping, this is way too cumbersome.
I often shoot short videos with my iPhone. I bring them into FCPX and edit it. Â
The problem is when I export it, it will have black bars on the side once its back on my iPhone. It will never just export to fit the screen like it did when I shot the video. I tried to customize the aspect ratio but it only gives me set options.Â
Info:
Final Cut Pro X, OS X Mavericks (10.9.3)
I edit on FCPX v10.0.9... (OSX 10.8.5) ...a client sent video at NTSC 720x480 DV... How do I FIRST import that video into an appropriate project setting without distorting the ratio (it keeps getting converted to 4:3 - narrower - and the original video is not 4:3)? and SECOND export and keep the same aspect ratio? I've done much research and realize that NTSC 720x480 DV is SD and FCPX wants square pixels etc.,My goal is to import the video, edit it, and export it all the while keeping the original aspect ration.
Info:
Final Cut Pro X, OS X Mountain Lion (10.8.5)
I am working with some NTSC DV .mov files (720x480). When I view them in OS X Lion (Quicktime 10.1), the Quicktime Movie Inspector shows the video correctly at 4:3 Aspect Ratio with the correct dimensions of 640x480 (using square pixels). However, when I open the same video in Windows 7 using Quicktime 7.7.2, It shows the video as 720x480 (I guess it is interpreting the pixels as square instead of 0.9091). Also, on the pc, there are black bars on the left and right margins. These don't appear on the mac. Why these are being interpreted differently by Quicktime on OS X and Windows?
Info:
Quicktime, Mac OS X (10.7.4)
have in the past few weeks uprgraded from tiger to leopard.Everything has been ok but i think i might have deleted some vital part of Quicktime player when i tried to clean up.I only realised this when i decided to get Quicktime player pro which i have paid for and have the key..I have tried to download quicktime from apple support website and just about any other website for that matter but zero.zilch.Installer takes me through the process but i get no player.
I have tried to remove all components of quicktime but to no avail.the download intalls but goes nowhere.Have tried to maybe 'jumpstart' it by double clicking quicktime time movies but there is just nothing going on.
Model Name:PowerBook G4 15"
Model Identifier:PowerBook5,8
Processor Name:PowerPC G4 (1.5)
Processor Speed:1.67 GHz
Number Of CPUs:1
L2 Cache (per CPU):512 KB
Memory:2 GB
Bus Speed:167 MHz
Boot ROM Version:4.9.5f3
Digital movies play just fine on my camera, a NIkon Coolpix but once I import them to either quicktime or windows media player they do not play smoothly. Any ideas why or what I can do to correct this?
Info:
quicktime or windows media player , Windows XP, camera digital films won't play
I successfully installed Adobe flash player. Latest version. How do I set this as my default player application?
The websites I use just keep saying to install the flash player.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have had this problem quite a while now:When I open an .avi file it automatically opens using QuickTime. I'd like that because it's the best player for Apple.The problem is however that I can only hear the sound, there's no image/video.I use 10.7.2. (now updating to 10.7.3), but it already did this before I had OSX Lion installed.If I search for new updates it doesn't come up with an update for QuickTime.Any other player works (although VLC's the only one I tried so far).
Info:
Mac OS X (10.5.8)
I upgraded to SL this morning, and need to speed up videos playing in Quicktime like you could do with the A/V controls (cmd + k) in Quicktime 7.
I know that Quicktime 7 is still in /Utilities, but Quicktime X looks so beautiful, I don't want to use it
I can't open quicktime player. I just downloaded the newest free version from the apple site. When I click open it says "could not open because the specified format is not supported" I think that is a problem with what opens it? Everything is set to open with Textedit, I don't remember how or why. How can I get quicktime to open?
View 24 Replies View RelatedToday I updated my System to OS X 10.6.3, which included a Quicktime update
After updating I can't play certain mp4 movies anymore with my Quicktime X Player: I can hear audio but I don't see video.
What is so strange about it that until today I was able to view them without any problems.
I still can watch them with VLC player.
When I click on file info, I see these codecs: AAC, H.264, MPEG-4 SDSM, MPEG-4 ODSM
How can I solve this problem? I am using OS X 10.6
What's this control in QT Player X? Sometimes it appears when I'm using QT Player, but it never sticks around long enough for me to see what it is or what it does. How can I reliably get it to appear, and what does it do?
Info:
iMac, Mac OS X (10.7.3), 12GB RAM
I have a few h.264 -mp4/m4v files that QTX can't open, but Quickview and QT7 handles with ease. The files have been made using Handbrake. Examining the info windows in QT7 on one movie that does work and one that does not, does not tell me much. they seem pretty identical. Info copied from opened files in QT7.
Not working: JVT/AVC Coding, 720 X 384, MillionerAAC, Stereo (L R), 48,000 kHz
Working: JVT/AVC Coding, 704 X 400, MillionerAAC, Stereo (L R), 48,000 kHz
I cant reinstall QT on 10.7.3, can I?
My Flash Player preferences (in the preferences pane) keep returning to the default settings after i have made changes to the settings. It seems to take about a week between the time i set the preferences till they return back to the default settings. As an example, about a week ago i set the "Storage" tab to "Block all sites from storing information on this computer." Last night i checked the preferences and this same tab had been changed back to the default choice, "Allow sites from storing information on this computer." Same thing for the "Camera and Mic" tab, i check the "block all sites", then in a week or so it goes back to "Ask me." This is occuring across all the tabs in the Flash Player preferences.Â
Info:
MacBook
Pro, Mac OS X (10.7), 2.2 Ghz Intel Core i7
Was wondering if someone out there can help me. When I get an email with an attachment & I opened it, it used to get saved on my desktop, but now goes to 'Downloads' after I installed SL. How do I change it back to download to mu desktop??
Now when I try to view a .wmv file it says that I do not have Quicktime player, which I do. I have to open the file via Quicktime & searching for it in my downloads folder. Have looked at the settings & appears to be OK....
I've just got a MBP that came with quicktime X. I assume this is the best/latest quicktime player but when I try watch some videos it wont play them, it just shows me a largish icon of the older Quicktime player icon. Anyone know why it doesn't play with QTX? I have tried downloading Quicktime 7 to just view these videos but half way through setting up it stops me putting it on my hard drive something about already there and to check software for updates.
View 3 Replies View RelatedI was having a problem with Quicktime player so I thought I would uninstall the program and then reinstall. I come from the world of windows so that is why.
I dragged the quicktime player icon from the applications folder to the trash and emptied the trash. I went to download the player application from apple's website only to learn this thing is supposed to be built into the OS.
So now the question is how to restore this thing? I am on a 2011 MBP with Snow Leopard.
Info:
MacBook Pro, Mac OS X (10.6.8)
How to open my Emails with Quick Time Player
Info:
MacBook, Mac OS 8.6 or Earlier
I recorded a video using PhotoBooth which now will not open in any of my players, QuickTime, VLC, HandBrake.
Finder tells me that it's a QuickTime Movie file, but QuickTime Player says "QuickTime Player can't open "Movie on 4-12-12 at 8.20 PM" because the movie's file format isn't recognized."
Why won't it open, and how can I get it to open? Additionally, I recorded a different video this morning and it plays just fine.
Info:
QuickTime Player, Mac OS X (10.7.3)
I was sent several mov. files in emails. When I attempt to play them, I am given a message stating that Quick time doesn't support the format.
Info:
MacBook Air, Mac OS X (10.7.3)
I have a QuickTime 7 registration. The registration windows shows I have QuickTime 7 Pro. The Pro features are not enabled. Here is my registration. None of the Pro features are available.
Info:
2 MacBook Core 2 Duos - MacMini - AppleTV, Mac OS X (10.7.2), iPod Touch - iPod Classic - iPad
