Everytime I install Vista through Boot Camp it can't find my network.. It says I don't have the networking hardware? When infact I do, it works beautiful in Leopard..
When I install through Parallels, it works perfect and finds the network...
The Broadcom Wifi drivers which installed with Boot Camp 3.0 were version 5.10.38.26 dated 10/22/2008 and have better performance or at least a connection speed than the current Broadcom Wifi drivers that came with Boot Camp 3.1 which are version 5.60.18.8 dated 8/21/2009.
View 2 Replies View RelatedAccording to the help file, it's found "in the utilities folder in the applications folder" but it's just not there. I have the newly updated macbook that I bought today, pre-loaded with Leopard. I was under the impression that it's a part of Leopard, and that I don't have to download it.
View 23 Replies View RelatedIs it because I burned XP as a .cdr ? How do I make it into a .iso?
View 6 Replies View RelatedI want to install Windows 7 in my Mac Book Pro (Intel 2.4 Ghz 4 GB 667 Mhz DDR2 Version 10.4.11) but I can,t found the Boot Camp in the Utility File,
View 1 Replies View RelatedSo, I have a mid 2008 24" iMac (the one with the black plastic backing) with all the possible hardware upgrades available at the time. I recently upgraded Leopard to Snow Leopard, which went great, except it messed up Vista. So i deleted the partition and started over, only with 64 bit Win 7 (with a disc i bought from MS). Boot Camp 3.0 installed it just fine, except now that I'm running Win 7, Boot Camp is no where to be found so I can't access Snow Leopard in any way. I pop in the Snow Leopard disc and it simply says my computer model does not support x64 boot camp.
View 7 Replies View RelatedI have a MacBook of 120 GB. I utilised Boot Camp utility to parition into 2 equal partitions to install Windows XP. I screwed up somewhere during the XP installation and it partitioned again while installation. The result: I lost my OS X. I re-installed OS X. In the finder I could see only the 60 GB partition. The rest 60 GB is missing.
I tried rebooting hoping it would prompt me to choose the partition but no uch thing happened. Now, I have and can see only 60 GB.
and what windows do I need to install?
Info:
MacBook Air, Mac OS X (10.7.4), 4GB
I just bought windows xp and i am just trying to install through boot camp. I downloaded Boot Camp Beta 1.4 installation and set-up guide. On step 1 it ask to "open boot camp assistant (located in Applications/Utilities/) and follow the on-screen instructions." I can't find Boot camp Assistant in the utilities folder. I am using a white macbook with mac os x 10.4.11.
View 6 Replies View RelatedI cannot find Boot Camp 3.0 on my Mac. I just upgraded to SL and it seems like it disappeared. A search in Spotlight returned nothing.
View 4 Replies View Relatedi have a macbook pro that runs on MAC OS 10.6.8, i need to install windows 7 on my computer, but i cant find the Boot Camp assistant in my utilities folder.
Info:
MacBook Pro, Mac OS X (10.6.8)
I tried to install Windows Vista (64bit) using Boot Camp. I get to the window where you select the disk partition you want to install Windows on, and there aren't any options. How can I get the newly created partition (the one I made with Boot Camp Setup Assistant before restarting) to show up on that list? Or, where do I find the "driver" that it requests instead?
View 12 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies View RelatedIs it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.
I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.
I have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.
Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.
Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedHave the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
I want to install XP using Boot Camp but when I run the Boot Camp Assistant I get the following message
Boot Camp Assistant can not be used
You must update your computer's Boot ROM firmware before using this setup assistant.
Now I have tried all firmware updates available on apple site but they say they are not needed, I'm on 10.5.6 and a friend of mine with same firmware runs his boot camp comfortably.
My Boot ROM Version:MB21.00A5.B07
SMC Version:1.17f0
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
View 2 Replies View RelatedI am trying to install Windows 7 Ultimate onto my Mac Mini using Boot Camp Assistant. On the Windows 7 install it reboots three times. On the third time, it boots to black screen with "Press any key to boot from CD or DVD...." When I try to hit any key on my Apple Wireless Keyboard, it does nothing. Same thing when I hook up a wired USB HP keyboard to the mini. It is entirely unresponsive. I have tried letting it run for a while to see if it would move on. I have tried changing the startup disk in Mac OS X to the Windows partition but I get nothing but a blank black screen with a flashing underscore.
View 3 Replies View RelatedI have a Dell Reinstallation DVD with Windows Vista Business 32BIT SP1. The DVD is supposed to be pre-activated to reinstall Windows. I recently used it to reinstall Windows on my Dell laptop and I was wondering if the same disk could work to boot a Windows installation from my Mac (via Boot Camp). I'm barely using all of my hard drive space so I may want to do this in the future.
I'm using an iMac under Mac OS X Version 10.6 (Snow Leopard)
I'm curious to whether the Mac Pro, which has 64-bit processors, uses the 64-bit or 32-bit version of Windows XP to install with Boot Camp.
View 25 Replies View RelatedI have just bought this macbook pro,and i would like to play wow.I heard that the performance is better if you use bootcamp ,but is it a huge difference?I can use windows,but if wow runs on mac os,then i would not like to use bootcamp. I do not really need Ultra settings,but I would like to go for good/high with 45+ fps.nother question. I read about GPU overclocking... Is it only available when you use Boot Camp?
View 6 Replies View Related