OS X :: Automatically Log Into VPN When Connecting To Certain Wireless Networks?
Nov 20, 2005
so my University uses the lovely Cisco VPN Client. Easy to get it working, not a big deal, but it annoys me that I need to start it manually every time I switch wifi networks and such. Is there a way to automate this? I want to connect to the VPN whenever the Airport logs into one of the University's wifi networks. The Cisco client also supports command-line mode, so I could write a script for that. But the big question is: is there a "connected to wifi network" event I can hook into using AppleScript or something.
I am using a Ralink wireless usb dongle, and I can pick up multiple networks in my area.I can connect to a local WPA2 network, using the shared key, but can't connect to the internet in Safari or any other program.I used to be able to access the internet with this very same hardware, using what I thought was the same software, though with an open network. When I look in network prefs at the device, called "ethernet eng3" (I think), it says "connected, but may not work because of a self-assigned IP", or something to that effect.
I recently reinstalled MAC OS X on my unibody MBP. I've installed all the updates and it's been working fine until now. When it goes to sleep automatically I press a key and it wakes up then the Airport icon in the bar at the top of the desktop stays greyed out. I have to go in and manually connect to my router each time the machine wakes from sleep.
Recently my Macbook Pro has seemed to develop a problem joining WPA2 networks that I have credentials saved for automatically, both at home and at school. At school it selects the network, but doesn't automatically authenticate, I need to go into the wireless settings and set it to 'connect' with the proper credentials selected in the 802.1x box. At home, it doesn't even select my home network automatically, I need to go and select it myself, but then it authenticates properly. Is there something I can do that will just delete All of my wireless configurations and associated content? I'm tempted to just wipe it and format if nothing else.
I have two different broadband connections at home on two separate phone lines.
Each broadband connection has it's own Wireless Router (1 has a Belkin 54g the other is an Orange Livebox). I also have an Apple Airport Express which is doing nothing at the minute.
What I'd like to do is set up the two networks to be linked i.e. the MacPro on Connection 1 will be able to see the other Macs on Connection 2 and file share the video's/music etc etc...
anyways, there's an application that shows which wireless networks are open/connectable. anyone know if it's still out there? as i remember, it shows in menu bar different networks, with a dot right next to it � green for open, and so on.
I'm having a bit of a nightmare with connecting to any wireless networks on my MacBook. If I click on airport in the menu bar there are no wireless networks listed - it's not finding any. Even in locations where I know there to be a wireless network that I've joined before (work, home, at a friends house) Any ideas on how to troubleshoot this or is it a straight visit to the apple store?
I'm using a Macbook Pro 17" 5,1 w/ Snow Leopard. For some reason I'm unable to get an internet connection from certain wireless networks. For instance I was away on vacation and when I returned I was no longer able to get internet access through my work's wireless network but I am able to connect and get internet access from my home network and others with no issues. Â
I've tried removing the stored networks, renewing DHCP, reseting the router and everything else I can think of. Â I am able to connect to the router, but the indicator light for internet shows red. My coworker on a similar Macbook is able to connect and get internet from the same network just fine.Â
When looking at the control panel on the router its showing that his Macbook is being assigned a dynamic IP but mine is being assigned a static IP but there isn't any way to control this through the router and since nothing has been changed in terms of the router's configuration I have to assume its something to do with my Macbook as I'm having similar issues with other networks I used to be able to connect to as well. Since I'm able to get online using certain other wireless networks its bloody well confusing.Â
Info: MacBook Pro, Mac OS X (10.6.8), Macbook 17" 5,1 2.6 GHZ
My pro only sees my Airport and does not detect other wireless networks even there are some around- my other macs detect 7 n all-- note I have win7 with bootcamp and does the same thing?
Info: MacBook Pro, Mac OS X (10.6.8), my laptop and sisters Imac see 7
I have a Unibody Macbook Pro, and I recently reinstalled Windows XP SP2 (updated to SP3) with Bootcamp. I am unable to see any wireless networks when I know several are present. (OSX Connects flawlessly).
I have attempted to update the drivers to no avail.
wondering if its possible to connect to two wireless networks to combine their connections and get a greater speed. in the 2 offices at work we have 2 separate wireless connections. one for the sales team, one for the support team. now my mac picks up both of them fine and i can connect. but im wondering can i connect to both networks and get a faster speed? i have a standard macbook (white one). would i need to buy a secondary wireless device like a usb wireless device and install that and connect to each network with each wireless device?
if yes how would i go about joining them together for combined speed. if not then can someone fill me in? or can i connect my standard mac wifi device to 2 networks at the same time? im a mac n00b - since last august so go easy on me
One day I noticed that my Macbook was having trouble find ANY networks available (despite knowing that many were available) - it doesn't see any. Occasionally the Airport will pick up a network or two with extremely low signal strength (even if the wireless router is in the same room) but usually has issues connecting and eventually the network disappears from Airport. At first I thought my Airport had totally crapped out and so I had to go out and spend $100 on a third party USB wifi stick (there are very few companies who make these for Mac, but for PC they can run for $15 ).
Now the crappy design of this USB wifi stick I purchased has caused the USB head to become bent and is ultimately deteriorating. SO, recently I noticed that when I use Bootcamp to run Windows 7 on my Macbook, Win7 is able to fully use my built in Airport hardware and receives great signal - so now I'm thinking that it may not be a hardware problem at all.
Just picked up my first mac, a brand new 13" MBP - which is awesome. I also have an AirPort Express that I've set up to use to play iTunes wirelessly to my external speakers. The problem is, my internet connection is coming off of another router (I live in a dorm-style place, so there is one shared internet connection). So far I've been able to either play music on my external speakers, or connect to the internet, but not both. Am I doing something wrong? Is it possible to do both at once?
I installed XP, via BC, on my older 20" iMac, and I keep getting an error message when trying to connect to my wireless network. My network shows that it is available, with full signal strength, but as soon as I try to connect to it, I get an error message saying that it may be out of range, and I should refresh and try to connect again.
I have a Macbook Pro running Leopard 10.5.5 purchased in early October 2008. for a few days I could get onto free wireless networks with Airport, however starting 2 weeks ago I cannot. there's no problem establishing an IP address. steps taken: talked to Applecare who told me I need new wireless card and told me to bring into apple store. apple store yesterday they told me it was a problem with the "preferred locations" function clogging things up so they cleared my cache and set everything to "automatic," unchecked box that says remember networks, and of course it worked fine. this morning it doesn't. once again I cannot get onto an open wireless network. also a new detail is that now when I connect my ethernet cable after trying Airport first I cannot connect, I need to restart computer 1st.
When trying to connect to my home wireless network, my computer doesn't recognize my network, or any network as being accessed before. It doesn't remember any networks. I even went into the advanced settings and made sure to check the box that makes it remember networks, and it still doesn't remember them. I am able to connect to my home network manually, but it will not automatically connect when I open the lid after it being closed, or when I turn off the wifi and turn it back on.
My MacBook Pro (17" from mid 2010 running OS X 10.9.4) won't connect to some "open" wireless networks. The ones it has problems with are typically in hotels and are the kind where a login screen is supposed to be presented after selecting the network. Instead of getting the login page I get the message that I can't join the network and am prompted to cancel or run all the diagnostics (which aren't useful).Â
My laptop seems to be the only one in my family that has this problem. We've been places where out of 8 wireless devices (4 Mac laptops and 4 iPhones) my MacBook Pro is the ONLY one that won't connect. My wife's MacBook Air always connects like a champ. And my MacBook seems to work fine on most secured networks, such as here at home.
I have a wireless network router/internet thing in one room of the house and my g5 is in another room. I also have a PC laptop and that can connect to my home's wirless internet no problem. My G5 simply cannot connect or even sense my 2wire901 home network, but it can see other networks in my home area. I only managed to connect to my own home network once! And the 2nd time my 2wire901 can never be found. Get this; it has to be the mac. Coz my laptop is sitting right next to my mac in 1 room and it has no problems connecting.
Has anyone installed linux 9.10 because I am having issues with it not showing any wireless networks or anything and trying see how to get it to find my router.
I searched the forum and couldn't really find anybody with this same situation. But anyways, me and my roommate both own Time Capsules, and both want to be able to connect to our own capsules, but we are obviously sharing the same internet connection. Is it possible to just plug the modem into one of the capsules, and then just plug the other capsule into that capsule? This way would there be two seperate networks that we could individually connect to and sync with?
Every time I close my MBP screen I have to re-enter my WEP password for my wireless network. This is very frustrating and I'm not sure if it is just an issue with keychain or if it is something else. If it is keychain I have no idea how to fix it as I have tried everything I know.
I recently purchased a refurbished AirPort Extreme Card and AirPort antenna for my late 2004 Power Mac G5. My Mac is running on OS X Version 10.4.11. I properly installed them, since the computer notes the AirPort Extreme card in the "About Mac" menu. There are a couple of wireless networks near my home and the computer doesn't detect any of them. I've checked out previous forum discussions around this issue, tried some suggested troubleshooting to no avail. Can I presume the AirPort Extreme card is defective? It detects absolutely no signal from the other networks around here. Could the WEP password length of our router have anything to do with it? Do I need to download a driver to activate the AirPort Extreme Card? Could upgrading to a different operating system make it work?
My computer used to connect to the internet straight away as it was turned on (wireless), but after a problem with downloading rental films with Itunes store, it has stopped connecting automatically. The fix for the film rentals was to delete a file called SC i think. I have had a dig around in all the network tabs
I have my wi-fi set to automatically connect to recognized networks. My home network is saved in my network settings. Yet, anytime I restart the computer it fails to automatically log in. I have to manaually connect to the network every single time.
I'm using a Macbook Pro OS X and was wondering if there is a way to stop my airport/wireless internet from automatically connecting to the internet when i start my computer.I want it so that it disconnects from the internet when i close the lid and for it to stay disconnected until i manually reconnect it myself again. I'm currently connected to shared internet which does not require me to enter a password.
I bought my Mac Pro as a refurb from Apple, but it didn't come with the wireless card built in. This didn't bother me because at my old apartment my computer was near the router so I just wired it up by ethernet. I just moved into a new place and my computer isn't within router distance and I don't want to run a bunch of cable. My boss gave me a card to plug into Apple wifi card spot and OSX found the card and showed some airport info, but it didn't find any networks and if I run the Airport Utility it says it can't find an airport card. So I assume it's not compatible. What are my options? Oh yeah, I found this on ebay. Sound reliable? [URL:....]
I have a MacPro and a Macbook. Recently I used the sharing function to play a game with my friend where I connected the two computers to a shared folder. I also installed Hamachi and used that for creating a VPN-network. Now I have erased the shared folder, uninstalled Hamachi and disabled the sharing function, but my MacPro still automatically tries to connect to my Macbook. The message is as following "There was a problem connecting to the server "MickiMacbook". "The server may not exist or it is unavailable at this time. Check the server name or IP adresss, check your network connection, and then try again". Â
I don't really understand why it keeps doing this as I've deleted all of the previously used programs. I've also deleted all of the files in /Library/PDF Services: but that did not work.
