I have a white macbook. I went on holidays and when I returned,the battery had and x through it. It wasn't plugged in. I try and check the cycle count, but since it doesn't recognize the battery, it won't say.
View 5 Repliesmy laptop (macbook pro) doesn't turn on, because the battery doesn't work (may be because of moisture), and the 7 battery lights on the left side are off, and when I plug the charger in, the light on the magnetic socket turns on so dim ..
Info:
MacBook Pro, Mac OS X (10.7.3), MC 700
My macbook pro is 14 months old, and its an early 2011 model. My question is: Does anyone experience with a x-icon battery? I tried to do the SMC reset, however nothing is fixed. It look like the battery does not commynicate with my Mac. Is my battery dead?
Info:
MacBook Pro, Mac OS X (10.7.4)
my GF and a glass of Wine. Cat hits wine and wine hits MBP. The Mac shut off instantly, we acted pretty quick and mopped up and turned upside down. I then took back off and over the course of the next 5 days I have stripped it down completely including the Key board and cleaned as best as I could. I've put it all back together and it starts up, a reassuring tone rings out, then apple sign appears with a loading bar beneath, this takes a while then it reaches the Lion log in page.It still recognizes me, or rather my name as the user but refuses my password which I know is correct.The keyboard isn't backlit but keys are typing something (can't see characters, just dots). Screen brightness works.No back light on keys although this may be normal at this point, not sure.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
My macbook doesn't recognize my new modum. I have to select it every time I log on and then comfirm the change by imputting my administrator's password. How do I get it to recognize my network as "preferred"?
Info:
MacBook, Mac OS X (10.7.3)
a few days ago, something weird happend, my 15" macbook pro just stop recognizing the internal speakers or the headphones, just died.The icon in the menu bar is low gray and do nothing the volume buttons appear with a forbidden sign I dont know wath to do?
View 1 Replies View Relatedmy mac book pro is not recognizing my WD 500 GB external hardrive. I checked and double checked to make sure the external was mac compatible before I bought : and it was. It also is not recongizing an WD external hardrive I borrowed from a co-worker. Here is what I have done and checked so far.Â
- I checked to see if the externals worked on other Mac Pros( just to double check mac compatibility)-Â they showed up on on 4 different Mac books.
- I checked to see if there was something wrong my usb ports. So I incerted my 4 GB flash drive in the USB port, and then my co-workers 4GB Flashdrive- My computer recognized both the devices.
- My computer was very full ( that is why I bought a bigger hardrive to back up my files) so I thought maybe there just wasnted even enough free space for my computer to recongize the devices. So I freed up 70GB of hardrive space on my mac book. - still nothing.
- I also checked to make sure I had the suggested software updates to run the drive, before I bought it. Â
Info:
MacBook Pro (15-inch 2.53 GHz)
I have an HP printer hardwired to my iMAC and have been sharing the printer, wirelessly through the home network, with an older Powerbook G4. I've added a third laptop (Mac Pro) which also shares the Wireless network, but can see the Printer online. I get a message that the Printer is not Online.
why the third laptop can't see the printer online?
Macbook pro will not eject or recognize cd? Ijust bought it in March.
Info:MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
My Mac book pro would not boot up. Only trouble I've had is it was getting slow to boot up I tried to reinstall OS X is it didn't show my hard drive. I put in a new 750 gig Western Digital and went to install OS X and I have the same problem I go to install and on the screen that you choose your hard drive it s
Doesn't show up. I went to disk utilities and only my DVD drive and portable hard drive shows up.
Info:
MacBook Pro, Mac OS X (10.7.3)
I just bought 2 - 4 gb memory to ugrade my 2 - 2 gb memory on my macbook pro 13" early 2011. Installed them and rebooted. The About Mac still shows 4 mb memory and looking farther it shows it has 2 - 2 mb memory. Also, now when I close the lid on the computer and it shuts down completely and not just go to sleep. i do not know if the two are related.
Info:
MacBook Pro, Mac OS X (10.7.4)
and it doesn't recognize my apple ID password even after i reset it.
Info:
MacBook Pro
I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that wont boot and it went an error trying to install, so i am able to boot with the alt key but my mac doesn't recognize de boot disk, when i try to select the startup disk on preferences it tells me: "You can’t change the startup disk to the selected disk. The bless tool was unable to set the current boot disk.", what i can do, i can boot with the alt key but it doesn't boot automatically.
Info:
MacBook, OS X Mavericks (10.9.5)
so just like the title says I'm having some trouble as I did a recent upgrade to snow leopard and I have been beach balling a lot. I read that I should do a fresh install and heres where I ran into problems. My external HD is not appearing in finder. It used to work just fine before and it works fine on all of my roommates macs. I tried rebooting to see if it would fix the problem and all that happened was it made my bluetooth module say it was unavailable. Anyone have any ideas on what to do?
View 5 Replies View RelatedHow do I get my Macbook Pro to recognize the Yeti Blue in the Sound Preferences?
Info:Mac Pro
My shiny new Macbook Pro has already had a logicboard (Mac-ish for motherboard) replaced due to this. Games (tested Battlefield Bad Company 2 and GTA IV) crash within a few minutes with the screen freezing and showing random colors as the sound starts stuttering and the only solution is to do a hard restart - see image below. GTA IV tells me that it only recognizes 60 MB VRAM so I guess that the problem is with the graphic card not being able to use the computers onbard RAM (8 GB Corsair Vengeance). The RAM doesn't fail any tests and the computer works like a charm in OSX for days on end, even with heavy Lightroom/Photoshop use. Drivers are up to date.
Info:
MacBook Pro (13-inch, Mid 2012), Mac OS X (10.7.4), Intel HD 4000
the other night my girlfriends white 2009 Macbook (was updated to lion) stopped recognizing the battery. Only would boot when plugged into AC. I have other Macs so I tried different power adapters and switching in a battery that I knew was charged from another Macbook, and still did not recognize. Both batteries show 80% full or more when button pressed on battery. I moved it to my office to debug, requiring that I shut down and move the power cord. Then when I booted up, it started shutting down 10 seconds after reboot to user screen. I did the SMC reset and the PRAM resets, did Safe mode checking. Mac would still not "see" the battery or stay on for more then a few seconds even on AC. I then used the Snow Leopard install DVD and disc utilities, did a complete erase of the hard drive and reinstall of the Snow Leopard DVD. That took around 30 minutes, and the Macbook stayed on the entire time during reinstall. 1st boot after reinstall, stayed on long enogh to "set up" a user, then the shutdown problems appeared again. Â
Not entirely sure, as the power light on the front has been faulty for over a year, so i can not see if it is "on", but if I plug in a thimb drive, the thumb drive light blinks as if it is getting poweer, I would think thta means the computer is on, maybe the display is just shutting off? I do not have the original install discs, just the Snow Leopard 10.6.3 install DVD and a Lion install thumb drive, how can I do a AHT?Â
White Macbook early 20092 Ghz Intel Core 2 Duo2 Gb Ram
120 GB Harddrive
Serial W8909P004R1
Info:
MacBook, Mac OS X (10.6.3)
My startup disc reported it was nearly full. I deleted 170 gbs of i tunes media and documents, and it still reports that my disc is nearly full.
Info:
MacBook Pro, Mac OS X (10.6.8)
When my laptop stopped recognizing my external keyboard and mouse I searched the discussions and found an answer that has worked, but only temporarily. It was to do a PRAM reset 3 times and when I do this the keyboard and mouse work fine. But when I disconnect the mouse and keyboard and then later reconnect it will not recognize them. I have repeated the PRAM reset 3 times each time this has happened (4 times) and they work fine but then there is always a problem when I disconnect and reconnect.Â
Info:
MacBook, Mac OS X (10.5.8)
macbook doesn't recognise external sandisk card reader, USB 3,in the shop said my mac with usb 2 would talk to each other, not happening, no icon on the desktop nothing.
Info:MacBook, Mac OS X (10.6.8)
To provide some background on my issue, my portable hard drive format was NTFS, and I wished for it to be FAT-32. I was trying to transfer some files over from my Windows computer to my Mac, however it wouldn't work due to the formatting. To change the formatting, I used some third-party software and started the conversion (without formatting the drive so that I could keep all my files) however mid way through the process, my stupid laptop entered sleep mode and stopped everything. Â
When I tried to re-plug the hard drive in my Mac, it didn't show up in the finder, but the Disk Utility did find it. The model I have is the iStorage DiskGenie portable hard drive. Â
Screen shot of Disk Utility: [URL] ......
MBA suddenly doesn't recognize printer on time capsule network even though MBP still prints to it on network all 10.7.3
Info:
imac, MBP
After using my MacBook Pro I close the laptop and it goes to sleep. Later when I return to it and open it, sometimes it can't find the network. The computer is able to see that I have an Apple Network available, but it won't connect.Sometimes when I try to connect, it gives me a timeout. How I fix it is to walk over to the router and unplug it and plug it back in. After I get the green light again, I go to the Apple Network and it works.
Info:
MacBook Pro, Mac OS X (10.6.8)
Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.
Info:
MacBook Pro (Retina, 13-inch, Late 2013), OS X Yosemite (10.10.1)
I bought a Macbook pro less than a month ago and notice that the battery doesn't last very much, only 3 hours. Is there something I could do to improve this?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I wonder if you can suggest something? My MBP currently doesn't recognise the printer I have (HP OfficeJet 6210, which has worked before with this computer). In fact the list of printer models under "add printer" is now empty. So it doesn't detect any printer and I can't suggest any printer for it to detect. I tried reinstalling the "printers" part of Snow Leopard but it didn't change anything. What would be the best thing to do?
View 5 Replies View RelatedI have a snowball microphone with USB connection. It was working fine until today. The light still lights up. I've tried the different switches at the back. I've restarted my system, plugged it in after I started Garage Band or before but not snowball in the system preferences or in the audio preferences of Garage Band.
Info:
iMac, Mac OS X (10.5.8)
I removed my battery and plugged the power cord, the small green light doesn't come and the mac book pro doesn't turn on.
View 19 Replies View RelatedI got a Macbook pro 13" and the battery don't charge.
Info:MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
Well, as the same title says, the battery of my macbook, when I'm charging it with the mac turned on, arrives to 99%, and when remaining 5 minutes, after this point, the time starts to increase, 6 minutes, 7 minutes, 10 minutes.... but doesn't charging at 100%.Â
Note: Cocconut Battery shows that the battery maximum capacity is at 88% with just 10 loadcycles !
Info:
Mac Pro
