My macbook doesn't recognize my new modum. I have to select it every time I log on and then comfirm the change by imputting my administrator's password. How do I get it to recognize my network as "preferred"?
Info:
MacBook, Mac OS X (10.7.3)
I used to own and airport express and it was cool with the feature of sending music to my speaker... but then It was time to upgrade...
so I get the Time capsule...
I opened airport utility and first it only recognize me the old airport express, I did a hard reset on the new time capsule and then it recognized me it but the old airport just disappear...
I have correctly configure the tc but the airport still doesn't show up ..
I have a white macbook. I went on holidays and when I returned,the battery had and x through it. It wasn't plugged in. I try and check the cycle count, but since it doesn't recognize the battery, it won't say.
View 5 Replies View Relatedmy GF and a glass of Wine. Cat hits wine and wine hits MBP. The Mac shut off instantly, we acted pretty quick and mopped up and turned upside down. I then took back off and over the course of the next 5 days I have stripped it down completely including the Key board and cleaned as best as I could. I've put it all back together and it starts up, a reassuring tone rings out, then apple sign appears with a loading bar beneath, this takes a while then it reaches the Lion log in page.It still recognizes me, or rather my name as the user but refuses my password which I know is correct.The keyboard isn't backlit but keys are typing something (can't see characters, just dots). Screen brightness works.No back light on keys although this may be normal at this point, not sure.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
a few days ago, something weird happend, my 15" macbook pro just stop recognizing the internal speakers or the headphones, just died.The icon in the menu bar is low gray and do nothing the volume buttons appear with a forbidden sign I dont know wath to do?
View 1 Replies View Relatedmy mac book pro is not recognizing my WD 500 GB external hardrive. I checked and double checked to make sure the external was mac compatible before I bought : and it was. It also is not recongizing an WD external hardrive I borrowed from a co-worker. Here is what I have done and checked so far.Â
- I checked to see if the externals worked on other Mac Pros( just to double check mac compatibility)-Â they showed up on on 4 different Mac books.
- I checked to see if there was something wrong my usb ports. So I incerted my 4 GB flash drive in the USB port, and then my co-workers 4GB Flashdrive- My computer recognized both the devices.
- My computer was very full ( that is why I bought a bigger hardrive to back up my files) so I thought maybe there just wasnted even enough free space for my computer to recongize the devices. So I freed up 70GB of hardrive space on my mac book. - still nothing.
- I also checked to make sure I had the suggested software updates to run the drive, before I bought it. Â
Info:
MacBook Pro (15-inch 2.53 GHz)
I have an HP printer hardwired to my iMAC and have been sharing the printer, wirelessly through the home network, with an older Powerbook G4. I've added a third laptop (Mac Pro) which also shares the Wireless network, but can see the Printer online. I get a message that the Printer is not Online.
why the third laptop can't see the printer online?
Macbook pro will not eject or recognize cd? Ijust bought it in March.
Info:MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
My Mac book pro would not boot up. Only trouble I've had is it was getting slow to boot up I tried to reinstall OS X is it didn't show my hard drive. I put in a new 750 gig Western Digital and went to install OS X and I have the same problem I go to install and on the screen that you choose your hard drive it s
Doesn't show up. I went to disk utilities and only my DVD drive and portable hard drive shows up.
Info:
MacBook Pro, Mac OS X (10.7.3)
I just bought 2 - 4 gb memory to ugrade my 2 - 2 gb memory on my macbook pro 13" early 2011. Installed them and rebooted. The About Mac still shows 4 mb memory and looking farther it shows it has 2 - 2 mb memory. Also, now when I close the lid on the computer and it shuts down completely and not just go to sleep. i do not know if the two are related.
Info:
MacBook Pro, Mac OS X (10.7.4)
and it doesn't recognize my apple ID password even after i reset it.
Info:
MacBook Pro
I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that wont boot and it went an error trying to install, so i am able to boot with the alt key but my mac doesn't recognize de boot disk, when i try to select the startup disk on preferences it tells me: "You can’t change the startup disk to the selected disk. The bless tool was unable to set the current boot disk.", what i can do, i can boot with the alt key but it doesn't boot automatically.
Info:
MacBook, OS X Mavericks (10.9.5)
so just like the title says I'm having some trouble as I did a recent upgrade to snow leopard and I have been beach balling a lot. I read that I should do a fresh install and heres where I ran into problems. My external HD is not appearing in finder. It used to work just fine before and it works fine on all of my roommates macs. I tried rebooting to see if it would fix the problem and all that happened was it made my bluetooth module say it was unavailable. Anyone have any ideas on what to do?
View 5 Replies View RelatedHow do I get my Macbook Pro to recognize the Yeti Blue in the Sound Preferences?
Info:Mac Pro
My shiny new Macbook Pro has already had a logicboard (Mac-ish for motherboard) replaced due to this. Games (tested Battlefield Bad Company 2 and GTA IV) crash within a few minutes with the screen freezing and showing random colors as the sound starts stuttering and the only solution is to do a hard restart - see image below. GTA IV tells me that it only recognizes 60 MB VRAM so I guess that the problem is with the graphic card not being able to use the computers onbard RAM (8 GB Corsair Vengeance). The RAM doesn't fail any tests and the computer works like a charm in OSX for days on end, even with heavy Lightroom/Photoshop use. Drivers are up to date.
Info:
MacBook Pro (13-inch, Mid 2012), Mac OS X (10.7.4), Intel HD 4000
My startup disc reported it was nearly full. I deleted 170 gbs of i tunes media and documents, and it still reports that my disc is nearly full.
Info:
MacBook Pro, Mac OS X (10.6.8)
When my laptop stopped recognizing my external keyboard and mouse I searched the discussions and found an answer that has worked, but only temporarily. It was to do a PRAM reset 3 times and when I do this the keyboard and mouse work fine. But when I disconnect the mouse and keyboard and then later reconnect it will not recognize them. I have repeated the PRAM reset 3 times each time this has happened (4 times) and they work fine but then there is always a problem when I disconnect and reconnect.Â
Info:
MacBook, Mac OS X (10.5.8)
macbook doesn't recognise external sandisk card reader, USB 3,in the shop said my mac with usb 2 would talk to each other, not happening, no icon on the desktop nothing.
Info:MacBook, Mac OS X (10.6.8)
To provide some background on my issue, my portable hard drive format was NTFS, and I wished for it to be FAT-32. I was trying to transfer some files over from my Windows computer to my Mac, however it wouldn't work due to the formatting. To change the formatting, I used some third-party software and started the conversion (without formatting the drive so that I could keep all my files) however mid way through the process, my stupid laptop entered sleep mode and stopped everything. Â
When I tried to re-plug the hard drive in my Mac, it didn't show up in the finder, but the Disk Utility did find it. The model I have is the iStorage DiskGenie portable hard drive. Â
Screen shot of Disk Utility: [URL] ......
MBA suddenly doesn't recognize printer on time capsule network even though MBP still prints to it on network all 10.7.3
Info:
imac, MBP
After using my MacBook Pro I close the laptop and it goes to sleep. Later when I return to it and open it, sometimes it can't find the network. The computer is able to see that I have an Apple Network available, but it won't connect.Sometimes when I try to connect, it gives me a timeout. How I fix it is to walk over to the router and unplug it and plug it back in. After I get the green light again, I go to the Apple Network and it works.
Info:
MacBook Pro, Mac OS X (10.6.8)
Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.
Info:
MacBook Pro (Retina, 13-inch, Late 2013), OS X Yosemite (10.10.1)
I wonder if you can suggest something? My MBP currently doesn't recognise the printer I have (HP OfficeJet 6210, which has worked before with this computer). In fact the list of printer models under "add printer" is now empty. So it doesn't detect any printer and I can't suggest any printer for it to detect. I tried reinstalling the "printers" part of Snow Leopard but it didn't change anything. What would be the best thing to do?
View 5 Replies View RelatedI have a snowball microphone with USB connection. It was working fine until today. The light still lights up. I've tried the different switches at the back. I've restarted my system, plugged it in after I started Garage Band or before but not snowball in the system preferences or in the audio preferences of Garage Band.
Info:
iMac, Mac OS X (10.5.8)
I just bought this mac pro and it intermittantly will recognize its bluetooth card. it is really annoying, seeing as i use the bluetooth mouse as well as keyboard. Whenever I restart after about 10 times, I have bluetooth.
View 9 Replies View RelatedI've started installing XP onto my iMac, and it's at the screen where it asks what partition it should be installed on. In order to select a partition, I'm supposed to use the arrow keys on my keyboard, but my keyboard doesn't seem to be recognized by the installer, as well as other keyboards I've tried. So now I can't install windows. How can I get it to work?
View 4 Replies View RelatedI Have a software installed on Power Mac G4 running Mac OS 9, this software is using a key installed on a usb dongle to launch. Now the software doesn't recongnize this usb dongle being plugged, although the MAC OS does! I have tried to reinstall the software, reinstall the OS without success , the problem persists. Does anyone pleaze have an idea where the problem could be or any useful information.
View 4 Replies View RelatedJust installed OSX Leopard on an Imac G5. Now it won't connect to the printer or allow any more software updates
Info:iMac, Mac OS X (10.5.8)
I have a Macbook Pro which is almost three years old.Applications like iLife and iWorks were installed on the computer long before there was the Mac Ap Store.These apps, and others on my computer, do not show up as Instaled in the App Store so I can't update them unless I use the old Software Update or the vendor's site.I don't want to purchase the apps again but is there any way to "register" these apps so the app store knows they are on my computer?
Info:
MacBook Pro, Mac OS X (10.7.2), iPhone 4s with iOS5, iPad2
itunes doesn't recognise my iphone
Info:iMac, Mac OS X (10.7.3)i
