MacBook :: Connection To Samsung T260?
Jul 16, 2009
I just purchased a Samsung T260, and hooked it up to my Macbook with the cable provided by Newegg. The monitor is calling for a resolution of 1900x1200, (I found the maximum macbook resolution is 1920x1200), but when I go to Preferences > Displays, the maximum available resolution is only 1600x1200. I searched and found that the maximum resolution for VGA on the macbook is only 1600x1200, I'm assuming this is the problem, is it likely that they included a VGA cable instead of a DVI cable and this is restricting my max resolution? If so, do I just need a DVI-D cable and then more resolution options will show up on the display options? Also, any links for the proper cable?
View 5 Replies
ADVERTISEMENT
Sep 9, 2009
I'm trying to connect my Macbook Pro to the internet via bluetooth getting the internet connection from my Samsung Tocco Lite mobile phone.
Following another thread on an O2 forum (going to system preferences, networks etc.), I think I got most of the way there, but after attempting to connect it disconnects and says that it can't connect properly (sorry I can't remember the exact message, I'll check again later and put it on here).
View 1 Replies
View Related
Dec 19, 2009
The first couple of days it got recognized by my Mac Pro when I connected it (USB). Today it stopped working. The cable can't be the problem because it's still charging while being connected to the computer.
Does anyone know what the problem might be?
View 4 Replies
View Related
Sep 6, 2009
I've got Mac OSx and trying to wireless connect to my new Samsung LED 7000 series TV using the Samsung Dongle I bought as an addition. But the software in the box and on Samsung website is PC only. I've tried connecting anyway but thus far failed.
View 1 Replies
View Related
Mar 16, 2012
The internal modem in my PowerBook Pro (mid 2010) shows up as "not connected" in the Network pane of system preferences, but I can't figure out how to get it to connect. When I enter my phone number and click the connect button, I get an error message: "Network Connection The communication device selected for your connection does not exist. Verify your settings and try reconnecting." Say what? It says it exists in the System Preferences, shows it in the list on the left. How can it not exist?
Info:
MacBook Pro, Mac OS X (10.6.7)
View 8 Replies
View Related
Jan 26, 2010
I recently purchased (as in days ago) a refurbished 13" Macbook Pro. I just noticed today that my wireless connection on my Macbook Pro has been losing it's connection about every other 2-3 minutes. I was on iChat with a buddy this morning, and I must have been disconnected and then reconnected about 8 times in 20 minutes. I first thought it must have been a problem with iChat. That said, I have sat here looking at my screen for the past ten minutes, and I have seen the Airport wireless indicator disconnect and then reconnect again at least three times in the past ten minutes.
I have AT&T U-Verse Service, and I am forced to use their provided 2WIRE router. That said, I have had no problems with any other device that uses the wireless connection, from my iPhone to my PS3. I work from home and have my HP laptop literally sitting right next to my Macbook, and it has not disconnected once from the same wireless connection, whereas my Macbook has literally disconnected at least 20 times.
View 9 Replies
View Related
May 18, 2012
I constantly loss connection to my wifi home connection, have to turn off an on the wifi on my macbook pro (10.7.4)
Info:MacBookPro, Mac OS X (10.7.4)
View 1 Replies
View Related
Apr 23, 2009
I thought it would be pretty straight forward connecting my mbp to my lcd samsung. I'm using a belkin hdmi to dvi, and after I connect and select the input on the tv, all I see is the original os x background on the tv. Ao at least I am seeing something and the cable seems to be working, but that's all I see. I can't get anything else to display. When I watch instruction videos people just seem to get the whole desktop with dash and everything to display right after connecting.
View 2 Replies
View Related
Jun 17, 2010
My wife and I have never had a TV and have always watched DVD's on our not-even-one-year-old MacBook Pro and after moving into a house, yada yada yada, we finally purchased a Samsung LN46C630 LCD TV.
Now, we aren't ready to buy a Blu-Ray player yet so we want to continue to watch DVD's on our MBP and hook it up to the TV and watch it from there.
View 2 Replies
View Related
Mar 3, 2012
I am trying to hook up a Mac book Pro purchased in Sept to a Smssung LCD TV purchased in Sept. I fet the computer display onthe TV but no sound. I have no sound-cables but apparently the newer Prod do not need them? The one lead goes from the Mac to the HDMI 1.
Info:
MacBook Pro
View 2 Replies
View Related
Apr 8, 2012
I am trying to connect my 17 inch early 2012 to a samsung 52 TV I can't I would like to know why?
Info:
Mac Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 7, 2012
I tried numerous different times to connect this printer wirelessly and it's not connecting.
Info:
MacBook, Mac OS X (10.7.2)
View 2 Replies
View Related
Sep 28, 2010
new Samsung Plasma television and have not been successful in attempting to connect my MacBook Pro to it. Here's what I've done thus far. I'm not sure of what the port is called on my MacBook, but I regularly use it at work to connect to a separate monitor so I know it works. I believe it's some type of DVI port but I know it's not a mini-dvi because I initially bought a mini-dvi adapter and that didn't fit the port. But I've got an adapter that plugs into that port, and converts to DVI. Then a second adapter that converts DVI to HDMI. Then I have a HDMI to HDMI cable that connects to my tv.
View 2 Replies
View Related
Dec 31, 2010
macbook 2.16GHz
OS X 10.4.11
I received a Samsung SyncMaster XL2270 as a gift. I would like to use it as a desktop monitor for my macbook when at home, but the driver included with the monitor is not mac compatible.
View 1 Replies
View Related
Feb 17, 2009
I am trying to connect my macbook to my Samsung LCD TV. The TV is Samsungs 3 series, and has 2 HDMI, audio, optical, RCA and PC input. I hooked up the video via the display port-HDMI and used the HDMI 1 port on my TV. It looks great. I tried my 3.5 audio cable to plug into the audio input on the TV. No luck. The audio input seems to correspond to that PC input so I'm guessing that I have to use the PC input in order to get the audio to work as well. Is this accurate? If so does anyone recommend an audio connection type that would work? Maybe I'll just run to Best Buy to get a 3.5 audio cable to RCA.
View 2 Replies
View Related
Nov 26, 2009
AMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Macbook Pro 2.5 GHz intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM OS Version 10.5.8
i connected the hard drive through the Hard Drive enclosure (OWC Mercury Elite -AL Pro) and my laptop is not recognizing the hard drive. i've also tried with PC and still same.
View 1 Replies
View Related
Apr 26, 2010
I did a google and MGoogle search but had trouble wading through all the previous threads.In order to connect my MacBook Pro (specs in signature) to my Samsung 40" HDTV, I need the following:
- DVI-HDMI Adapter
- HDMI Cable
- Audio cable - What type? Is this plugged into the headphone jack on the MPB and where on the TV?
Also, what do I need to know/do on the computer in order to ensure the picture and sound is on the TV. Do I need to switch any settings or is it as simple as plug it in and away you go. I'd like to purchase these cables today after work and since I'm nowhere near a Mac store can they be bought at BestBuy, The Source, or somewhere similar?
View 1 Replies
View Related
Jul 17, 2010
i just bought a DVI to HDMI cable, to plug my macbook pro to my big samsung tv. I successfully connected them to eachother, but there was only 1 problem which ruins the whole experience. There are weird fuzzy colours all around the screen and is almost impossible to see anything.
Here you can see the DVI cable plugged in the MBP:
And on the tv screen everything looks messed up:
this is a brand new cable so i don't think it would be the problem, im only afraid maybe my DVI input would be broken.
View 1 Replies
View Related
Jul 20, 2010
any experience with one of these drives in a MBP?
Newegg has a 640GB one on sale for $65.98 through 7/25.
For $65, I would like to double the size of my current HDD (even though it's 7200RPM).
View 4 Replies
View Related
Apr 7, 2012
I am using a rocketfish thunderbolt to HDMI dongle, HDMI cable to the TV. The TV seems to recognize that something is connected, but the message on the screen still says no signal. I've tried the various HDMI inputs as well as the HDMI/DVI input. I use the same HDMI cable to connect to the iPad to the tv without problems.
My Macbook shows "Samsung" under displays, so the machine is connecting to the tv. Could this be a firmware issue on my TV? The TV is approx 3 years old. This is part of the reason I bought this machine
Info:
MacBook Pro, Mac OS X (10.7.3)
View 6 Replies
View Related
May 12, 2012
I have just bought one of these pico projectors to try and display my macbook's screen. I cannot seem to get it to find the computer though, doesnt say anything about not being able to connect to a mac so is it not possible?? I have the minidisplay port to VGA connector, just says no signal or something about audio being present or not.
Info:
Final Cut Pro 7
View 2 Replies
View Related
Sep 2, 2008
I'm going to be getting a replacement screen for my MBP so I'm curious if there is a difference between the two screens. With both work on my MBP or should I swap whatever the original is only? Any benefits of one over the other?
View 22 Replies
View Related
Jan 13, 2009
I have a 2.4 GHz Aluminum MacBook which I'm trying to connect to a Samsung T220HD LCD monitor/TV.
I'm using the Mini Display to VGA adaptor.
I know the adaptor works b/c I can connect it to another external monitor at my work.
When I connect the MB to the monitor, the MB sees it b/c "Syncmaster" shows up after I detect displays. However, nothing shows on the T220HD screen. Sometimes, the LCD simply says, "There is no device connected."
View 24 Replies
View Related
Jan 24, 2009
So I purchased the VGA adapter to hook up my MacBook to my Samsung 22" LCD.
Everything works great, but every 30 minutes or so, my Samsung "loses" its signal with my MacBook, goes black, then the connection is detected again and it's restored. I see the "Analog" icon flash in the corner of the LCD once the signal (OH FK ME there it goes again) comes back.
View 3 Replies
View Related
Jun 14, 2009
I connected my Samsung syncmaster 215TW with macbook - via minidisplay port reduction to DVI. when I turn the monitor verticaly, nothing happens... do I have to install some aditional software to my macbook?
View 3 Replies
View Related
Aug 30, 2009
connect the macbook unibody 13" (not the pro) , the apple tv 40gb to a samsumg LCD full HD 37" LCD (3 HDMI inputs, 1 component video input, 2 composite video, 1 PC input, 1 optical sound output).
View 1 Replies
View Related
Sep 12, 2009
I'm looking calibrating my SyncMaster 206BW with my New UMBP. I realize that its going to be a little off because the screens are two different types.
View 1 Replies
View Related
Mar 13, 2010
OK, the title pretty much says it.
I just popped a 256GB Samsung SSD into my (old) PowerBook Pro1,1 2.16Mhz machine.
I used the disk utility to properly partition the drive (1 partition) and set the Scheme to GUID Partition Table successfully. Verified the drive and the disk utility seems to like it.
I restarted with the install DVD (10.5.7 from a "13-inch Mac OSX Install Disk" - 9J3050) and it still gives me the old, "You cannot install Mac OS X on this volume"
So... the OS is newer than the one that shipped with the machine, and the partition table is correct... what gives?
View 5 Replies
View Related
Feb 25, 2012
how to install a Samsung CLX-3185FW to print wirelessly? I have downloaded the drivers from the Samsung site which enable me to print via USB and also to connect the printer to the home wireless. On a MACBook Air I've managed to install the printer using the IP address. I can then print from the MacBook Pro by sending it through the MBAir as the printer shows up as connected to the MBAir. However, when I try to install the printer to the MBPro using the IP address I'm told that Apple doesn't have the necessary software. Consequently, I'm unable to print directly from the MBPro to the printer.
Info:
MacBook Pro (13-inch Early 2011)
View 4 Replies
View Related
Mar 13, 2012
I have a MacBook Pro 5,2 with OS X 10.6.8. I also have a Samsung Galaxy S2. I want to hook it up to the Mac to use as a USB tethered network device so I can use it on the train and wherever wifi fails to work. I can get the phone set up right, but the Mac doesn't see it as a network device. There is a Windows network driver for the phone but not a Mac driver that I can find. I CAN use portable WIFI hotspot, but with 2 radios running my battery life is terrible and I get some serious network lag.
Info:
MacBook Pro, Mac OS X (10.6.4)
View 4 Replies
View Related
