any experience with one of these drives in a MBP?
Newegg has a 640GB one on sale for $65.98 through 7/25.
For $65, I would like to double the size of my current HDD (even though it's 7200RPM).
AMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Macbook Pro 2.5 GHz intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM OS Version 10.5.8
i connected the hard drive through the Hard Drive enclosure (OWC Mercury Elite -AL Pro) and my laptop is not recognizing the hard drive. i've also tried with PC and still same.
There seem to be a few reports of problems running 750gb F1 Spinpoints with Nvidia chipsets. Does this apply to us with the 8800 or is it a Windows thing?
Anyone out there happily running a MacPro (08) with an 8800 and F1 spinpoints?
Which one of these 500gb drives is better? I've been browsing Newegg for two hours now reading reviews. The Seagate drives seem to come with bad firmware that causes performance and cache recognition issues. The Samsung drives have a high failure rate. Whats the real deal? Has anyone here had any bad experiences with either drives?
View 24 Replies View RelatedI recently bought a used MBA, I always want one when it first came out, finally wait until now because of the big price drop My first mod to my MBA is to upgrade the hard drive. I wasn't pay much attention when I purchase this replacement hard disk, didn't notice the MBA only takes 5mm height, as most 1.8" in the market are 8mm. But since it's in my hand right now, I decided to put it on see if the MBA recognizes it. Not too much surprise, leopard installation went very smoothly. After the installation, the available space is about 95gb. And because of the 5400rpm, it feels faster.
Too bad the bottom won't close because of the height of this drive. But at least this gives me an idea, and I know there's a Toshiba 1.8" 120gb 4200rpm 5mm out there, and it should fits perfectly in MBA. Anyway, I'm still debating myself rather getting this Toshiba drive or a Samsung 32gb SSD(Same drive as used in the Rev.A SSD version, but different capacity) As the price of these two drives are pretty much the same (around $150 range) I have another computer for my main work, so I'm toward getting a 32gb SSD
I've seen a few of these threads but I need more information.
5400rpm HDD is a bit slower but uses less power.
Exactly how much power is lost to upgrading? I know its not much but its important. The 7200rpm upgrade is like an extra 40 GBP or if I downgrade the spec to a 320gb its cheaper than the 5200rpm 500gb.
If I get 4 hours of battery life on a 5400rpm, how long would a 7200rpm last? Is there a loss of an hour? or a mere 15 minutes?
I am looking at buying a 15" MBP next weekend. I was nearly set on the i7 model with the high res AG screen, but now I am looking at other configurations and am wondering if that is the best choice.
I'll be doing a lot of coding but I do that fine on my 1st gen macbook, so I am not worried about performance in that regard.
The main thing I am thinking of is video editing with Premier Pro CS5. If I get the i5 I can upgrade the hard drive to the 7200 RPM version which I think will get me better performance on editing HD video than the i7 will as it will be accessing the hard drive a lot for the video. Will the performance boost of the 7200 RPM beat out the i7 in video production?
Also I am wondering about battery life, I have heard that the i7 gets around 4.5 hours in normal usage. That is fine but will the i5 + 7200 get more than that or about the same? (Not while editing video, just web browsing, email, maybe photoshop)
Anyone have any thoughts on this? or any experience editing video with the i5 or i7 mbp?
I have a year old 15' MBP, with a 2.66GHz C2D, 4GB of RAM, and a 320GB 5400RPM drive. I just purchased a 250GB Seagate 7200RPM drive which I use in an external enclosure for my Time Machine. I have no complaints for my computer being terribly slow, but I was wondering if I would get a significant boost from having the 7200RPM drive in my MBP. Before anyone recommends that I get a SSD, I do plan on buying one once prices keep dropping. Right now $1600 for a 480GB OWC SSD is a little steep for me.
View 1 Replies View RelatedIt's been a looong time since I've posted on these forums, it's good to be back though! I have just dug out my old white MacBook- specs are as follows:1.83GHz Core Duo 1.25GB RAM 60GB 5400RPM HDD Put simply, this thing is really starting to chug! Modern websites such as eBuyer, engadget etc cause the HD to go crazy and it's generally pretty slow, even when doing 'simple' things like making powerpoint presentations.
View 9 Replies View RelatedGot a MPB 13". I need a good external drive, but I'm wondering which is the data bottleneck: FW800 or 5400RPM?
The reason I ask is I have an old iMac with FW400 and an external Hitachi 7200RPM 200GB 16MB cache in an OWC case that's (suppesedly) capable of FW800. It seems to have taken the same amount of speed to restore a very large file to my iMac (FW400) vs. my new MBP (FW800).
I would like to replace this drive with something bigger, but if FW800 is the bottleneck, then I'm thinking I should just get a 5400RPM drive to both save money and get a larger drive.
I'm using an early 2008 MBP (4,1) running the original 5400rpm 200gb HDD but upgrading to 500gb this week.
I'm looking at WD Scorpio 5400rpm but wondering if 7200rpm reduces the battery life relevantly.
Also, I'm running 2gb of memory but I'm debating if 4gb would be dramatically faster.
Or do you think I would be better off buying a new mbp?
I had an issue with the 9600m GT Graphics card a few weeks ago where the graphics card wouldn't display anything when plugged into an external monitor. The apple store checked it out and said the logic board was faulty and that it would need to be replaced under warranty. (Late 2008 15" macbook pro).
When I received the laptop back, they not only replaced the logic board, but they also replaced the SSD with a 250gb 5400rpm hard drive. I called in and, after being upgraded to the top level supervisor, he said that all of the hard drives being replaced were sent to be refurbished or recycled and that my hard drive had a fault in it so they replaced it. He says that they restore it to the apple original condition and originally they sold it with a 250gb hard drive in it so that's what they replaced it with. Their policy is that only if they replace aftermarket ram with apple ram will they return the aftermarket parts back to you. This repair was conducted yesterday, the 15th of January by apple Tech ID #612525.
I don't expect to get my data back, but if anyone has any idea on how I can get my hard drive back, I'd be willing to reward $100. A new Intel SSD X25-M G2 would be around 250 so I wouldn't want to do that.
I've been on the phone all day with the apple support so I am very frustrated right now.
I bought an i5 15" MBP last week and instantly through my 80GB SSD into it. I've been doing my best to keep a lot of unnecessary data off the SSD but I'm still running out of space. I'm thinking about throwing the stock 5400rpm 320GB drive into an Optibay tray and using that to hold the data. I use Photoshop and Illustrator quite a bit and I would like to use the 5400rpm drive as the scratch disk as well.
However, I'm not to familiar with read/write processes and I'm wondering if I will see a speed decrease if I use the 5400rpm drive to house the data while leaving the SSD open for the OS and all applications. Should I expect a noticeable decrease in battery life with both hard drives installed as well?
Do 5400RPM HD allows maximum speed over FireWire 800, or 7200RPM HD will be faster? Basically 7200RPM makes difference in speed if you using FireWire 800 or not?
View 3 Replies View RelatedThe thing is I dont really need 500gb of space. But from reviews Ive read that the 500gb is faster in some cases because of its higher platter density.
Vibration /noise issues on the scorpio black 7200rpm sway me towards the scorpio blue 500gb as well.
Anyone had experience of either hard drive or both? (this will be for a 2.2Ghz MBP)
Now, I am in the market to replace my stock 160GB HDD in my MB, as I want a bigger hard drive in my PS3 and was thinking I could put the MB one in there, and buy a larger one for the MB.
I am debating between a 320GB 7200rpm and a 500gbrpm drive. I currently have this external drive:
[URL]
I HATE it. It takes a super long time to start up(close to 3-4 minutes) and then opening up videos takes a good 2-3 seconds. But, I have a 5400rpm drive inside the MacBook and was wondering if 7200rpm with 16mb cache would really make a significant difference in day-to-day use.
i have a 14" iBook G4 1.33Ghz 1.25gb Ram 60gb 4200rpm HHD. I have a 60gb 5400rpm HHD lying around and I am wanting to upgrade to Leopard. Is it worth the effort upgrading to a 5400rpm drive? Will I notice a speed increase?
View 5 Replies View Relateddo I have to take the 15" or 17" macbook pro unibody? I mean not just screen size either, it's more like I don't know, the one plus to the 15" model is the SD card reader, but is that a reason to not buy the 17" if not considering the screen size for a moment. Either way, the processor would be the 2,8 Ghz or maybe even the 3,06 Ghz. If I buy the 15" ofcourse there is a bit more money to spend on tweaks like the bigger processor and maybe more RAM and faster HD, but that said, I still can't choose. I even have questions if not the 17" runs a bit cooler than the 15" same spec model just because it has "more space" inside... crazy thinking I know, I might just be so wrong but still, who knows. And then for the HD, is it according to speed, so much better to take the 7200 rpm 500gb over the 5400 rpm 500 gb? The 7200 rpm will use a bit more battery life ofcourse but with up to 8 hours of battery, I might just think about possibly more speed instead of battery life. Few years ago I read something about the bits in a 5400 rpm being very close to each other so the reading was as fast as an 7200 rpm, I don't know about you but this makes me wonder wether or not buying it over the standard HD.
View 8 Replies View RelatedI thought it would be pretty straight forward connecting my mbp to my lcd samsung. I'm using a belkin hdmi to dvi, and after I connect and select the input on the tv, all I see is the original os x background on the tv. Ao at least I am seeing something and the cable seems to be working, but that's all I see. I can't get anything else to display. When I watch instruction videos people just seem to get the whole desktop with dash and everything to display right after connecting.
View 2 Replies View Related My wife and I have never had a TV and have always watched DVD's on our not-even-one-year-old MacBook Pro and after moving into a house, yada yada yada, we finally purchased a Samsung LN46C630 LCD TV.
Now, we aren't ready to buy a Blu-Ray player yet so we want to continue to watch DVD's on our MBP and hook it up to the TV and watch it from there.
I am trying to hook up a Mac book Pro purchased in Sept to a Smssung LCD TV purchased in Sept. I fet the computer display onthe TV but no sound. I have no sound-cables but apparently the newer Prod do not need them? The one lead goes from the Mac to the HDMI 1.
Info:
MacBook Pro
I am trying to connect my 17 inch early 2012 to a samsung 52 TV I can't I would like to know why?
Info:
Mac Pro, Mac OS X (10.7.3)
I tried numerous different times to connect this printer wirelessly and it's not connecting.
Info:
MacBook, Mac OS X (10.7.2)
new Samsung Plasma television and have not been successful in attempting to connect my MacBook Pro to it. Here's what I've done thus far. I'm not sure of what the port is called on my MacBook, but I regularly use it at work to connect to a separate monitor so I know it works. I believe it's some type of DVI port but I know it's not a mini-dvi because I initially bought a mini-dvi adapter and that didn't fit the port. But I've got an adapter that plugs into that port, and converts to DVI. Then a second adapter that converts DVI to HDMI. Then I have a HDMI to HDMI cable that connects to my tv.
View 2 Replies View Relatedmacbook 2.16GHz
OS X 10.4.11
I received a Samsung SyncMaster XL2270 as a gift. I would like to use it as a desktop monitor for my macbook when at home, but the driver included with the monitor is not mac compatible.
I am trying to connect my macbook to my Samsung LCD TV. The TV is Samsungs 3 series, and has 2 HDMI, audio, optical, RCA and PC input. I hooked up the video via the display port-HDMI and used the HDMI 1 port on my TV. It looks great. I tried my 3.5 audio cable to plug into the audio input on the TV. No luck. The audio input seems to correspond to that PC input so I'm guessing that I have to use the PC input in order to get the audio to work as well. Is this accurate? If so does anyone recommend an audio connection type that would work? Maybe I'll just run to Best Buy to get a 3.5 audio cable to RCA.
View 2 Replies View RelatedI just purchased a Samsung T260, and hooked it up to my Macbook with the cable provided by Newegg. The monitor is calling for a resolution of 1900x1200, (I found the maximum macbook resolution is 1920x1200), but when I go to Preferences > Displays, the maximum available resolution is only 1600x1200. I searched and found that the maximum resolution for VGA on the macbook is only 1600x1200, I'm assuming this is the problem, is it likely that they included a VGA cable instead of a DVI cable and this is restricting my max resolution? If so, do I just need a DVI-D cable and then more resolution options will show up on the display options? Also, any links for the proper cable?
I did a google and MGoogle search but had trouble wading through all the previous threads.In order to connect my MacBook Pro (specs in signature) to my Samsung 40" HDTV, I need the following:
- DVI-HDMI Adapter
- HDMI Cable
- Audio cable - What type? Is this plugged into the headphone jack on the MPB and where on the TV?
Also, what do I need to know/do on the computer in order to ensure the picture and sound is on the TV. Do I need to switch any settings or is it as simple as plug it in and away you go. I'd like to purchase these cables today after work and since I'm nowhere near a Mac store can they be bought at BestBuy, The Source, or somewhere similar?
i just bought a DVI to HDMI cable, to plug my macbook pro to my big samsung tv. I successfully connected them to eachother, but there was only 1 problem which ruins the whole experience. There are weird fuzzy colours all around the screen and is almost impossible to see anything.
Here you can see the DVI cable plugged in the MBP:
And on the tv screen everything looks messed up:
this is a brand new cable so i don't think it would be the problem, im only afraid maybe my DVI input would be broken.
I am using a rocketfish thunderbolt to HDMI dongle, HDMI cable to the TV. The TV seems to recognize that something is connected, but the message on the screen still says no signal. I've tried the various HDMI inputs as well as the HDMI/DVI input. I use the same HDMI cable to connect to the iPad to the tv without problems.
My Macbook shows "Samsung" under displays, so the machine is connecting to the tv. Could this be a firmware issue on my TV? The TV is approx 3 years old. This is part of the reason I bought this machine
Info:
MacBook Pro, Mac OS X (10.7.3)
