I'm looking to purchase an external hard drive for my 2009 Macbook os x 10.6.8 (the heavier, white laptop). It looks like most hard drives are compatible for Macbook Pro and newer.
Info:
MacBook, Mac OS X (10.6.8)
I swapped my hard disk on the above mentioned machine and it won't boot. When I turn the machine on it tells me that there is no bootable disk. I have previously booted from the disk via usb, so i know there is a bootable partition on it. I swapped back the original drive and it boots up fine. Why wont the external drive boot when run internally?
View 6 Replies View RelatedI know I need a Phillips 00 Screwdriver but what screwdriver do I need to remove the hard drive shielding. I googled the topic but I kept getting conflicting information. Some people say I need a Torox T6 screwdriver while others say I need a T8 or does it really matter.
View 6 Replies View Relatedhow's the stock drive that comes standard with the laptop? should I even think about spending money upgrading the stock drive to a bigger capacity from the online apple store upon checkout, or should i save it for a third party install?I read somewhere that the WD 500GB scorpio blue 5400rpm beats the Seagate even though the Seagate runs at 7200rpm. True? Any mechanical drive faster than the above two (and I mean one within the reach of the typical consumer, not some new fangled prototype running at 15k rpm)?
View 5 Replies View RelatedCan I upgrade to a hard drive that has SATA 3 interface with my Macbook Pro mid 2009 model?
Info:
macbook pro
I'm looking to the size of the Hard disk drive in my 2009 17-inch pro. But can't find if the case will take a 1T HDD or not. As the 1T drive are around 12mm and not 9.5mm of the smaller one right now.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have change the hard drive in my macbook aluminium 2009, the new drive is Seagate (Momentus XT ST750LX003) hybrid drive.Each time osx turn off the drive all the applications are killed except osx. I have tested 2 different drives and i have the same problem with both. Seagate do not have anything about this problem. Â
I even turn off the power saving of the computer and the hard drive... but after an hour of inactivity all the apps are killed ( except osx).Â
Info:
MacBook, Mac OS X (10.7.3), HDD seagate Momentus XT ST750LX003
I recently picked up a 17" 2009 unibody MacBook Pro with Intel Core 2 Duo 2.8ghz, 4gb RAM, SuperDrive and a Samsung 1TB hard drive. The system did not come with the original hard drive and I don't have any other hard drives to test and verify that the new larger hard drive is the cause. I have tried a clean install of Snow Leopard, Lion and even Mountain Lion but no matter what my fans always running at max speed (5k+ RPM). I have looked at iStat and the temps of any of the components in the machine never show more than 42*C so the fans should never be running at full blast. Oddly enough smcFanControl shows 0* temp but fan speds for both left and right are always 5.5k+ and very noisy. Using HDD Fan Control I am able to get at least the right fan to run at a controlable speed but its silence is drowned out by the left fan that still runs on full blast. I have already done multiple SMC resets and PRAM resets with no change in the condition. These noisey fans are driving me insane! I have run every available update as well. Is there a chance that the hard drive or something elses temp not being supported or detectable by OSX is causing the fans to default to the fail safe constant high speed?!
Info:
MacBook
Pro, Mac OS X (10.7.3), 2.8GHz Core2Duo
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedWhat is the easiest way to replace the internal hard drive on a 2009 iMac? I've got 320 gb of space and only a few gb left.I'd like to upgrade to 500 gb or more.I don't want to take the computer apart myself, I don't think.
Info:
iMac, Mac OS X (10.7.2)
I have an I-Mac that is from either 2009 or 2010. latly it has been freezing and laging. what hard drive would be good to increase speed and add more space, that is compatible with my model Mac?
Info:
iMac, Mac OS X (10.7.4)
Need official route to upgrade my hard drive in my iMac.
Info:
iMac, iOS 5.1.1
I am going to remove the Superdrive from my 2009 mini and replace it with a second HD as detailed by ifixit [URL] I will then run OS X from the X-25M SSD and the second drive will be a 320Gb Scorpio Black which I will run XP in boot camp from ( have to use additional internal drive to boot XP from since the X25-M currently will not work with XP and I cant get XP to boot from an external drive...). This leaves my setup without a way to work with optical media so I was looking to get an external usb drive and plug it in whenever I would need to install something from a dvd, or burn a cd etcetera.
Instead of throwing away the removed superdrive though and buy another drive, how about recycling it as an external usb superdrive? I would connect it via usb with a Deltaco sata to usb adapter I have. Anyone see a reason why this would not work? Has this been done before?
I'd like to replace (upgrade to larger drive) the hard drive in my iMac myself.
Info:iMac (27-inch Late 2009), Mac OS X (10.6.8)
Can I use a thunderbolt storage haqrd drive with my late 2009 iMac?
Info:
iMac, Mac OS X (10.7.4)
i wanted to upgrade my hard drive will any hardrive fit it or has it got to be something special?
Info:
Mac mini, Mac OS X (10.7.4)
I am slowly getting to the limit of my 2tb hard drive and would like to purchase the largest drive possible. It is mainly for my itunes library. So if i can split the library into seperate parts easily i could just buy another 2tb. Would like to hear suggestion about sizes of hard drives compatible with early 2009 mac pro or hints on how to split itunes library into diff parts.
Info:
Mac Pro (Early 2009), Mac OS X (10.7.2), its actually OS X 10.7.3
I'm not sure what the culprit is because the night I downloaded the last update of 10.5.8, the circuit for this room also blew. I don't know if it interrupted the download or not, as I wasn't paying attention. However, the next morning I woke up to the gray screen and it never booted. I finally was able to boot it up and the hard drive had a name like kjkldfjkjdkljafkjadkj. I renamed the hard drive and ran disk utilities on it. It needed to be repaired, so I installed the installation CD and used disk utilities from it. It says everything is fine. However, the hard drive now does not show up under Devices when using Finder. Also, everything seems to be a lot more sluggish now.
View 2 Replies View RelatedI stopped by a friends house to try and help them with an early 2009 20" iMac that started stalling on startup (sometimes before their login screen, and sometimes after). The computer didn't exhibit this behaviour at all, then overnight, it behaved as stated and never once allowed them to get far enough to launch an application or open the Finder.Â
When I arrived, rebooted and held down Command + Option + P + R, but it had no effect on the problem.  I then booted off the original OSX discs and ran Disk Utility. At first it seemed slow to complete, but before long (a few minutes) the Verify Disk finished without any errors. Next, I attempted "Repair Disk Permissions" and noticed that this was taking a very long time, +10 minutes. That said, it did complete without any problems, albiet slowly.Â
Unfortunately, this did not allow me to login, and I never made it to the login screen. Being a close friend, I offered to take the computer home and try to copy as much data as I could through Target Disk Mode over Firewire.Â
My first attempt to copy her Home directory got 25% of the way through the roughly 4 GB of data, then stopped. I rebooted and tried again, with even less success than before (I could barely access Folders let alone copy after the reboot). I attempted to recreate the "successful" attempt by unplugging the computer and letting it sit for a few hours. Sure enough, I was able to copy data from the Target Disk Mode mounted drive, but after about 1 GB of copying the access to the hard slowed to a crawl (a few kilobytes per minute) then halted completely.Â
I've repeated the above process to slowly but surely copy the entire 4 GB of home directory data, and am about to call it quits after salvaging what was important to her.Â
Question: Is this the sign of a failing hard drive close to the end of its life, or is this something potentially more serious with the logic board? I've only come across a stubborn drive like this with an external drive that was close to failure, and assume this is the case.Â
New hard drive installed on my 2009 mac book. Can I reinstall pages, numbers, etc... from the App Store? I was running Lion.
View 1 Replies View RelatedCan anyone tell me if I can put a Hard drive from a 2008 15" MacBook Pro directly into a new June 2009 13" MacBook pro without erasing the drive and reinstalling OSX
View 9 Replies View Relatedif i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedBasically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
How do I get photos from backup external drive on to my new hard drive on my MacBook
Info:
MacBook, Mac OS X (10.7.3)
So around 5 years ago i got the WD-160JB hard disk drive. I want to see all the things i did back then. I want to be able to connect this WD-160JB drive as a external hard drive to my mac.Â
What i am wondering is if you can somehow have a cable or something which links the USB from the MBP to the hard disk.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies View RelatedI've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies View Relatedi just got the new WD5000BEVT 3.0 Gb/s in order to replace my old HD but found out that my previous one has 1.5 Gb/s interface. i'm wondering if the new HD can be replace. if it can't fit, i plan to use it as an external hard drive but have no idea what kind of drive enclosure i should looking for.
View 3 Replies View Related