So my 13-inch MacBook Pro's trackpad has become more and more annoying over the months. I'm trying to determine if what's annoying me is normal.
Basically, I can only guarantee the trackpad to register a click if I really push down hard on it. If I click normally--with an audible click--it will not register 50-70% of the time. I've put a YouTube video of it up at the link below.
The right side of my Late 2008 UniBody MacBook trackpad does not click. It used to click. Now, it takes a few clicks to "make it loose" and then it clicks. What could be the issue?
Also, I have noticed that the trackpad makes a "loose glass" noise sometimes. Almost like the glass is becoming loose from the trackpad.
My late 2009 13" mbp trackpad clicking funtion stopped working. The one figure tap jestures still work and click, but when i physically push the trackpad down and "click" it doesn't work. Anyone have any advice? Nothing was spilled on it or anything abnormal like that.
View 4 Replies View RelatedJust wondering how to adjust my settings with the new trackpad? Would prefer it to be like the older MBP however with the new track pad seems things got all messed up due to the new settings. 3 finger swipe 4 finger swipe. I know to go to system settings > trackpad but from there I don't know how to set it up without all the extra stuff. I did something and now when i double click anything on the desktop it will not open so cannot double click to open things or double click to highlight text. I've tried everything and cannot get it fixed. It will let you double tap the top of trackpad but then you have to scroll to the open and click open. Is there anyway to set it up the trackpad to open icons by double clicking them? Or just dumb down the settings to standard point/click double click to open.
View 2 Replies View RelatedFor some reason i purchased this three weeks ago. Everything was working fine. However today i guess i closed the lid and then when i opened it, the computer didn't wake up. So i just held the power button and restarted. It booted into Leopard fine but now the trackpad and keyboard don't work....
The trackpad and keyboard seem to be fine when i hold the option key too choose what volume to boot from. It seems for some reason the keyboard and trackpad lose its function once it boots into leopard.
I looked up forums and tried numerous things like VRAM wipes, SMC reset, tried external keyboard and mouse and they only work up until it actually boots into the leopard OS. Tried going through a hub and same problem.
my wife's trackpad stopped responding to clicks today. The only function it will do is two fingers for right click. none of the gestures work, and the mouse cannot select anything, since it cannot left click. Same for tapping on the mouse as for actually physically clicking the trackpad down. I have restarted it a few times, and each time it functions normally for about a minute before it stops. Now the really weird part -- my USB mighty mouse does the same thing when plugged in. It works for about a minute, then suddenly the only thing her mb will recognize is the right click. I'm probably just going to have to take it in tomorrow, but if anyone could save me the trip.
View 2 Replies View RelatedI have a question about the trackpad on my unibody macbook with the bad screen sadly . Is the "button" area of the trackpad (where the button would be) suppose to be unresponsive to movements, for example, when I move slowly along the button area, my mouse curser does not move at all while any movement in the middle is registered with high sensitivity. It only starts to register when I move towards to middle of the trackpad or quickly along the button. However, three and four finger gestures work perfectly along the button area. I have also notice that the corners of the trackpad are also unresponsive to movements.
View 2 Replies View RelatedI didn't have a chance to take a picture, but I can take one when I get home if needed.I never noticed this before, until I recently compared it to another Macbook, but my glass trackpad has a different feel, and unlike the other unibody macbook, the trackpad is not flush with the enclosure, and there is a small space on the left side, and an even smaller space on the right side.I don't want to take it into the store, if this is something that is normal, or within spec. Aside from this issue, the trackpad works without issue and everything else is great.
View 4 Replies View RelatedWell my Macbook Pro makes a loud "sticky" sorta noise when I click on the edges of it, and you can really hear it when i click outside the trackpad on the actual frame. Its quite annoying, and I just bought the new 13" Macbook Pro and this does not make this noise. [URL]
View 4 Replies View RelatedI've had an idea bouncing around in my head about turning my Poly Unibody Macbook into a sort of Super Stealth Macbook like this one: [URL]
Sending the Macbook to Colorware to be painted Jet Black is the easy part. That leaves only two problems:
Giving my Unibody Macbook a Backlit Keyboard .
Painting my trackpad black.
I bought an oldish MacBook 13' Unibody (late 2008) and when I got it one of the first things I did was to install Mac OSX Lion.
Everything was working fine, until I applied an update that made the trackpad stop working (it only accepts clicks, no touch is recognized).
This is the "Trackpad Firmware Update" from the automatic updates.
When starting this firmware update it appears a window with a status message, cancel and Update buttons. After clicking the update button, it starts installing, appears to complete, status changes to "Finishing...", and Update button comes back active at some point.
After that I have tried (unsuccessfully):downloading and installing the update directly from Apple Support [URL] thing, but using the 'root' accountleaving the computer on overnight to see if actually "finished" the processReset PRAM PVRAM - [URL] - [URL] palm pressing over 30 seconds on the trackpad (read this on another thread...?)
Info:
MacBook, Mac OS X (10.7.4), MacBook 13 Unibody (late 2008)
Video available here.
View 2 Replies View RelatedI have been searching day and night for a decent car-racing game for OS X. What game is this? (See attachment)
View 2 Replies View RelatedI just got my first Mac, a unibody MacBook, about two weeks ago, and last night as I was using it, I noticed that the touchpad feels somewhat distorted and uneven. For example, at the moment, it seemed to be indented where I use my index finger the most (towards the center and slightly left of center), and it seems to be raised more toward the right side of the touchpad. When I first took it out of the box, the touchpad seemed to actually be raised more in the bottom left, but since that was out of the way, it didn't really bother me, but now it seems like every time I use the touchpad, the bumpiness of it shifts around to different locations depending on what location on the touchpad I use most.
View 7 Replies View RelatedSo my 6 month old Unibody has had an issue for a while that it drops the internet connection, though keeping the network/WiFi connection. It started out just on campus where there is a campus wide SSID that is unencrypted, though requires a login to start browsing. A restart of the computer fixes this issue, though it always repeats itself (usually after 30-45 minutes of browsing, no downloading). Lately, the issue has been getting worse. It is now dropping the connection on other APs, and even stops the Airport card altogether (KisMac can't even scan). I had a backlight bleeding issue fixed by Apple. Is this connected? I know the airport card is in the screen, so maybe they didn't fix it well.
View 2 Replies View Relatedtrying to watch show on cwtv.com got this message. What the heck?
Your computer's video card is unable to render the video and controls.
I recently added a 4GB chip into my late 2008 MBP 2.8ghz to bring it to a total of 6GB. Everything works great as long as the computer is in video performance mode. However, as soon as I switch to energy saving mode, I get a crash shortly after login. The only solution is to remove the chip, turn back to performance mode, and reinstall the chip.
Any other reports like this? Should I try a different vendor? I've already swapped out the chip once already, and the RAM vendor reports that they have no additional information. The chip I had worked fine in their test machine, but they didn't have a 2.8 ghz to test on.
So what do you think about it?
I'm not too fond of it, I think its noisy and needs just a slight too much force to click. I only click it when I "right click"
After opening my macbook pro from sleep sometimes, maybe all the time, when i move cursor in the top left of the screen (area approx 2 inch down by 1 inch across from top corner) where the trackpad is unresponsive. I can move the cursor around there but i cant select anything so eg, closing a tab in safari.
View 1 Replies View RelatedHaving issues with trackpad, specifically not able to drag and drop Tried changing the setting in control panel (preferences) but with no changes. Also looked at permission associated with a particular file but again ... same problem, its a global. Ran OnyX maintenance and clean up, attempted to use diskwarrior but need to upgrade to 4.4.Had no real chance to search forum yet so the answer maybe waiting to be accessed.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.6.8)
I just got a Early 2011 Macbook Pro 15" i7 that has a broken scissor for the "x" key (I still have the black "x" key itself. Would the scissors from an late 2007 Macbook Pro 15" be compatible (I've got an old dead keyboard for it that had coffee spilled on it)?
View 1 Replies View RelatedMy Trackpad on my MacBook isn't working properly. I can move the arrow around the screen but I'm unable to open any applications. I plugged in a mouse and it works fine. The trackpad settings in system preferences seem fine, I didn't spill any liquid on it and didn't let it fall.
Info:
MacBook
My trackpad is now having some troubles on my Alu macbook. I can't highlight or drag things anymore. Occasionally it will work but it will be jerky and only highlight bits that I don't necessarily need. This is vital for me as I need to copy parts of statutes etc. as I'm in law school. I think I have installed the firmware update but I'm not entirely sure - if someone could link me to it that'd be grand.
My internet on campus is also extremely slow.. It doesn't have anything to do with the signal either. We have an Apple reseller on campus who said it might be a problem with the airport card.
Basically - should I take it in? Obviously it has some issues but I don't know if I'm being too pedantic or what..
When i go to the link and select either the 32bit or 64bit version it takes me to this web page. displays a banner that says windows.
Am I missing something for the download to be successful?
if im viewing a website and they have flash video i want to save, how will i do this. i cant right click and get info there specialized player wont allow this.
View 23 Replies View RelatedI ordered NFL game rewind so I can watch all of last years games. I was wondering if anyone knows how to save the videos I watch. The videos are in flash, but when I view activity monitor there is nothing being downloaded.
View 4 Replies View RelatedI listen to and watch a lot of podcasts. Quite often, after I am done listening to a Audio Podcast I will watch a video podcast. Some times it gets stuck and won't play the video but plays audio fine. Anyone else have this problem?
View 1 Replies View RelatedI have an late 08 unibody Mbp and a 11 mba, I have noticed the glass trackpad on the air is much closer to the glass on an iphone in the way your finger reacts to it... the least bit of moisture and your finger doesn't glide as easily. On the pro it seems to have more of a coating to allow for smoother use under these normal conditions (humidity). Has anyone else noticed this? bottom line the air trackpad almost seems more polished.
View 1 Replies View RelatedI have a Bluetooth mouse that I use with my MacBook Pro.
In Tiger & Leopard, I was able to set my Mac so that it disabled the trackpad from use when the Bluetooth mouse was connected. I just noticed that that setting has been undone and I can't seem to find the preference to set that setting.
Anything? Thoughts? This obviously isn't a crisis, I'm just curious if they've moved the preference someplace else... or something.
Suddenly am unable to connect my wireless mouse and trackpad ... The Bluetooth option is also missing ... Am running os x with all the latest updates ..
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
