MacBook Pro :: Scratch Noise When Closing The Lid?
Sep 15, 2010 slight scratch noise comes from the lid when i am closing, the noise is annoying me and happened a few weeks ago.
Do you think it is a fault ?
slight scratch noise comes from the lid when i am closing, the noise is annoying me and happened a few weeks ago.
Do you think it is a fault ?
There is a small crackling noise when I close my MBP lid. It seems like the joints are really dry and need oil almost. Is this normal?
View 9 Replies View RelatedWhen ever i open or close the case for my white macbook it makes a creeky noise. Is this normal or should i go to the apple store and get them to check it for me?
View 8 Replies View Relatedits normal for the lid to be making a plastic cracking noise when closing and opening it? Its like a clicking noise as if it catching on something as its being opened. I didnt notice it at when i first got the unit, but now it seems to be getting progressively worst. Also was wondering, does anyone else find the case flimsy around the ports on the left handside? I can push the plastic in and out with my pinky.
View 8 Replies View RelatedWhen I go to close it, it makes a noticeable clicking then shuts as normal. If I leave it in a partially closed position for a few seconds, it clicks again when I shut it.
Obviously something is getting stuck or jammed but I can't see what it is or which bit of the hinge it's stuck in...
My 13" MacBook Pro (Mid 2011) is making a loud click, or snapping noise whenever the clamshell is closed, or moved a little sometimes. It's becoming very persistant and doesn't seem normal. Most of the time it does make the noise (which is from the back right). I'm taking it in tomorrow under warranty. Any suggestions? Is this normal? The screen also moves smoothly and is always in place. It's all strange and hopefully they can replace the hinge.
Info:
MacBook Pro, Mac OS X (10.7)
I am starting to a hear a clicking sound opening and closing my new MBP. It sounds like a loose hinge or a cable getting caught or something.
I took it to an Apple store to see if they could pop it open and take a look but they said they would have to send it away and it would take 7 to 10 business day. I really don't want to be without my new computer for 7 to 10 days. It isn't that big of deal but it does tick me off every time time I open and close and I worry that if it is a cable it would eventually cause a problem.
I just got my 2.0ghz Alu Macbook a few days ago and everything works perfectly well, the thing is that after day one the magsafe started to emit a low pitched electrical whistling noise. It tends to be there a few minutes after booting into the OS and then it turns down to almost unhearable, but I experienced it returning after a few hours of use and then disappearing again. If I move close to the escape key I can hear a crackling noise emitting from the magsafe.I'm not trying to be overly nitpicky or anything but I read somewhere that if it's doing that it would be a faulty Mag-Safe board or something.
Does any one you guys know anything about this? I have the 14 days to return it as I bought it online from the Apple Store so if it's a faulty part that might die/break/ cause problems later I might have to.
Sometimes I lift and carefully move my 17-inch MBP a short distance to another flat surface without putting it to sleep mode, it starts making really loud mechanical noise when I put it down, so loud that people in the same room can hear the noise and I can feel vibrations too! What causes this? Where does this noise come from? Is my MBP defective?
View 3 Replies View RelatedMy first generation unibody Macbook hasn't had any problems to this date but now it's constantly making that mechanical loading-like noise which is usually heard when the Macbook is switched on (the noise before the start up sound) or when the lid is opened to wake up the computer. Is there a fix to this?
View 5 Replies View RelatedOn my 13" MacBook Pro, the hinge makes a cracking noise on the right side of the computer (near the power button) when the screen is positioned all the way back.The entire hinge also makes a loud popping noise when I adjust the screen position. The screen seems very tight, and it takes a little bit of effort to move the screen, and when the screen is moved it makes the loud popping noise.
This is probably going to make some of you guys cringe, but sometimes putting pressure down on the top of the case close to where the black hinge meets to unibody enclosure seems to stop the popping noises. Putting downwards pressure on the hinge, or flipping the computer over and putting pressure on it that way, also seems to alter how much popping noise there is.
If I mess around a bit with applying pressure on different parts of the computer around the hinge, I can usually eliminate the noise. But, the cracking noise when I put the screen all the way back is still there.Any ideas what to do? It's not interfering with the operation of the computer, it's just incredibly annoying and this is only a four month old machine which shouldn't be creaking and cracking already.
Has anyone else had problems with an old G3 Pismo making an annoying squealing noise when plugged into a charger? There's a lot of noises mentioned in mac/apple forums but none of them relate to this one. Here's what it is not:
It's not coming from the screen or the fan or the speakers (it's under the keyboard). It's not low or slightly annoying (it is a loud squeal). It happens only when the power adaptor is plugged into the laptop.(it used to cease after I unplugged the power adaptor and plugged it back in three times; now that solution doesn't stop the noise anymore). It charges ok, and runs ok, scream or no-scream. It's quiet right now, but if I move the adaptor to another plug it will start again.
I was going to live with this, but today after an hour of operating quietly it just started again, and I hate to leave the house with this going.(it will scream whether the laptop is on or off. I have a really old battery and cannot replace it (I am currently staying in Mexico for the summer). Battery life is 45 min. I haven't tried pulling the battery out. That would be too easy.
This all started when I bought a replacement power adaptor (generic),after the original one melted down, but I could stop the screaming by unplugging/plugging it in again once or twice. Then I bought an expensive iGo adaptor, and it does the same thing.
I Did the PRAM and PMU reset.I can hear it over music or the tv. It grew lower in pitch today after squealing for a half hour. I'd normally not let it go on that long, but i was
in the other room.Is my PISMO dying?
(400 mhz pismo G3 500 sdram, osx-10.39, no os-9 or Classic, new 80g HD)
I just got my macbook pro yesterday and ran it all yesterday not hearing anything. Today when I woke it from sleep I could clearly hear the fan or hard drive going. I was in a quiet room and it's quite annoying.
istat says its at 2000 rpm so thats when I started thinking it may be the hard disk. It does pulse every now and then but thats even while it's just sitting idle.
I guess I could live with it but its just annoying. Anyone else having this?
My sister has given me her computer and i would like to re create it just like you do as soon as you get it, reset all settings so i can change them to mine... How can i do this??
Info:
MacBook
Pro
I recently purchased a Macbook Pro 15" Unibody and my titanium steel watch is resting against the wrist rest. Which is the most reliable and affordable option to protect it from scratches on the wrist rest and the top and bottom of it's body.
View 13 Replies View RelatedI just bough a 13in MBP yesterday at bestbuy because they let me get my student discount and they gave me an ipod touch for free without the rebate. So When I got home and opened it I noticed a pretty deep scratch in it right above the power button about a half an inch long that wont come out if i try to clean it. My question is do you think that would be enough of a reason to exchange it? I know its only cosmetic but I really dont think that should be there when you buy a brand new computer. What do you think?
View 18 Replies View RelatedI don't think it does but I just wanted to make sure that a scratch on the MBP does not void the warranty.
View 5 Replies View RelatedI am receiving a message that says there is not enough scratch space disk space. How do I clean this up on my mac ?
Info:
Mac Pro, Mac OS X (10.7.3)
My friend has the MacBook Pro 13" and may be I'll buy that MacBook. But there is one little Problem.He has a scracht on the display. It is about 2cm long and circa 0,5mm deep.Is it possible to remove that scratch?Or do I have to change the complete display-glass?
Info:MacBookPro, 13"
I am from India , my Macbook pro is out of warranty and has got a hairline scratch on it , what should I do?
View 2 Replies View RelatedSince I got my new MBA, I am afraid of closing the lid without using the factory keyboard layer fearing the keys may scratch the monitor. Am I being paranoid? I am sure the keyboard has been designed as to not touch the screen when its folded right?
View 11 Replies View RelatedI was cleaning my screen (glossy) on my MPB and noticed a few hairline scratches. Are there any ways to remove the scratches on the screen?
View 11 Replies View RelatedI just had the laptop on one hand, and was carrying my dog on the other hand and as soon as I turned around it hit a door. Now that's how that scratch got there. I'm so sad because I was so taking care of it! It's under the mini monitor port as you can see. Does anybody know how I can get that scratch off? [URL]
View 16 Replies View RelatedI am sure this has probably been asked a million times but is there anyway to touch up a black mark thats on my macbookpro. It doesn't look like a scratch, more the aluminum finish has rubbed off or been scratched slightly.
View 1 Replies View RelatedNow for those of you who used mbp for a while, how easily do the aluminum unibody dent/scratch? it seems every single used mbp on ebay i see had some sort of dent on it. All of the mbp casings look bad, including the see thru one, they defeat the purpose of having a slick unibody mbp. The only option is those invisible films that stick onto the mbp, but they need water to install. None of them seems like good options. Anyway I am thinking of just getting a sleeve and leave the mbp naked. Is that a good idea?
View 21 Replies View RelatedMy MacBook Pro is having some weird dock problems that started today. I recently installed a 64GB Patriot SSD and reinstalled the OS from scratch.
View 12 Replies View RelatedI was thinking about possibly selling my MacBook Pro and purchasing the 11.6-inch Air because I'm a college student who doesn't need much more than word processing, web browsing, iTunes, and portability. But I hear that the Airs don't have the glass covering of the Pro... Is the screen itself plastic or glass and does it scratch easily?
View 7 Replies View Relatedhow can i get rid of it? insurance? a buffer of some sort?
View 2 Replies View Relatedtoday I received my new MBP15, unpacked, opened the screen..and I found this: [URL:...] it's not in relief, seems some defect in the aluminum, like metal fatigue. Is it common? No way to fix it?
View 7 Replies View RelatedI need to build a website for my shop but need a simple to use programme, can anybody give me an idea of what to use.
Info:
MacBook