Can any body tell me how to eject my Garmin Ant stick from my USB port safely.I was told to go to Finder & eject by using the icon for the device.I have looked on finder & there doesnt show any device on there for me to eject.I did try ejecting by using the eject key on the keypad but when I pulled the stick out I got a dropdown warning me I had done it wrong.
Info:
Mac Book Pro, Mac OS X (10.7.3)
I own a Garmin 60CX, What I am wondering is. Is there software which would allow me to use my laptop with my Garmin, for better road navigation. Something similar to Microsoft Streets and Trips
View 7 Replies View RelatedI have a Macbook running Mac OS X 10.6.2. I eject my memory stick by highlighting it in the finder the selecting File - Eject. The memory stick icon then disappears from the Finder but the light on the stick is still on. As I selected eject I remove the stick anyway. The next time I insert the stick I am told that I did not eject it properly.
View 3 Replies View RelatedIs there a release or something to push the eject does not work
View 1 Replies View Relatedthis is starting to irritate now. apparently macs are supposed to be able to read ntfs formatted disks.
now although mine is able to do so, i find it strange that when i eject the disk its unable to do so. and so i end up pulling the usb cable to exit it. of course this is an improper exit and i am sure harms the drive in some way.
after mounting the drive, i normally see 2 icons - one has the drive letter and contains all the data, and the other shows the setup for the software installation in windows. now whenever i highlight both these and drag them to the trash can / right click to exit, only the drive icon disappears and within a second or two the software installation icon reappears and the drive does not shut down as it should.
so, is there some way to eject the drive properly?
I have an ongoing project for school that requires me to work on it both at home and in school. When I have finished working on the documents for the project in school I save them to a single folder on my USB flash drive. When I get home I need to continue working on the same files within that folder. Is there an application that will sync the folder on my memory stick with the one on my home laptop as soon I plug in the flash drive? Could I make this in Automator?
View 2 Replies View RelatedCannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
Info:
MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)
No hdmi port with this laptop?
View 1 Replies View Relatedintel iMac , 10.5.8 , suddenly USB ports stop seeing any devices ( flash memory stick , iPod etc ) connected to it , neither on keyboard nor on computer back panel . Finder or Disk Utility not showing this devices , but the devices could be seen using SytemProfiler . The same devices connected to another Mac computer are working fine .
Info:
iMac, Mac OS X (10.5.8)
I just had the laptop on one hand, and was carrying my dog on the other hand and as soon as I turned around it hit a door. Now that's how that scratch got there. I'm so sad because I was so taking care of it! It's under the mini monitor port as you can see. Does anybody know how I can get that scratch off? [URL]
View 16 Replies View RelatedMy external hard drives simply refuses to eject/un-mount, and I've done everything I can think of to terminate any processes and/or applications that may be using the drive and preventing it from being ejected properly, but I haven't had any success. Is there some Mac-Jedi way of going about isolating what might be preventing this drive from ejecting properly? I've scoured the activity monitor but can't figure out what might be preventing the drive from ejecting?
View 6 Replies View RelatedOn my new imac (version 10.7.3), every 20 minutes or so I get an error message that says, "you did not eject the disk properly" (even though I did not eject or remove or change anything)?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I inserted a blank disk earlier today. Automatically a hazard icon appeared where the eject icon should be. Now the disk wont come out and there is no obvious way to remove it.
View 4 Replies View RelatedI found this iBook in my dad's attic at his business. He said he had bought when they released and planned on using it for financial stuff, but figured his Windows laptop would do better. It was in its box BTW, not collecting dust.
Anyways, it's out of warranty and it's specs are:
1.07 GHz PowerPC G4
768 MB DDR SDRAM
Combo drive
12" screen
30GB HD
The combo drive is not fun. It takes a good push, no shove, into the slot for it to go in. It reads it fine and all, and can burn CD's, but pulling it out is plain horrible. I can't just take it and pull it out, I have to have my dad hold the iBook, and I grab the CD and pull it out. The CD ends up having deep scratches and is unreadable from then on. What do I do? Replace it? Or is it repairable?
I started to have a perplexing problem that I narrowed down to the audio in-put port on my Mac Pro (MacPro3 ,1). It was working fine then the sound level increased and the quality became distorted (like a "fuzz base" but affecting all sounds)I was in the process of digitizing records, and believed the record played broke. So I got a new record player (audio-technica AT-LP120-USB). The same thing occurred with the audio in-put port, so I switched to the USB port and the audio was fine. I also checked with music already on my HD and it played fine. Consequently it has to be the in-put line port and/or a software issue.
Info:
Mac Pro (Early 2008), Mac OS X (10.6.8)
I have a MacBook Pro that I use sometime on Apple Cinema Display. On the USB ports of the display I attached an Western Digital external hard drive. Now, when I want to unplug my laptop from the display, should I eject the external hard drive first?
View 2 Replies View RelatedI'm considering buying an old G3 500 Mhz laptop. Seller says it can't boot by itself, either through its own hard drive or an OS Panther installer in the cd drive. It does give the welcome chime but the screen then displays the folder with the question mark. So it's either the hard drive or the logic board. Anybody try to boot off the cd thru an external cd drive (with its own external power supply)? There is no firewire port on this model. Yeah I know I'm supposed to press the option key before the welcome chime.
View 2 Replies View RelatedI just bought Samsung UN46C7000WFXZA. I want to connect my macbook pro to the TV and i got all the cables that i need.
1- HDMI cable
2- Mini DisplayPort to HDMI Female Adapter.
3- this sit that include Audio Cable
[URL] I did connect everything my macbook pro very well to the TV using HDMI cable from the laptop to HDMI/DVI port in the TV. Also I connected the Audio cable from my Headphone port in my laptop to PC/DVI Audio IN in the TV. Yes I got the pic and everything is good but no sound at all. I tried everything and i searched the net but no luck or answer at all.
I want to import photos from my Sony memory stick pro duo to iMac. My imac has SD card reader but not sure whether it reads photos from memory stick pro..
i bought this iMac in May 2011. I believe this model doesn't support Memory stick pro.
Info:
iMac (21.5-inch Mid 2011)
Just got a Nuvi 265WT from Amazon yesterday and when I tried to register it using Safari, I have OS-X version 10.5.8. and the Garmin website would not complete it. I had to download Foxfire and use it to register my GPS even tho I had been able to use my older mac mini before to register my Garmin GPSMAP 76Cx.
View 1 Replies View RelatedHow to eject an installation disk, the eject button won't work?
Info:
MacBook Pro, Mac OS X (10.6.6)
I have used my gps on my g4 tower. I had to first get it recognized on a pc but then it worked on the g4. Now I have an imac 27 inch i7 and the garmin nuvi 850 is not recognized though it shows it is connected on the garmin screen.
View 2 Replies View RelatedI've had a Garmin GPS unit for about 2 years. When I got it there was virtually nothing in terms of software for my Mac. But I just visited Garmin's web site and it now looks as though there's lots of software available. I just downloaded BaseCamp - does anyone use this software, and if so where do you get your maps?
View 1 Replies View Relatedthinking about putting the image to an external, as a seperate partition.
then use the usb stick, as my usb stick. Good idea?
it looks kinda flimsy, not sure how it will hold up.
So my question is simple. I have the base 13" mbp. So I have 2 x 1GB sticks. Can I get 1 x 4GB stick and make that total 5GB? Or do I have to purchase in pairs (2 x 4GB)?
View 6 Replies View Relatedwhen I connect my Garmin Edge 705 to the MacBook Pro (Mac OS X 10.7.4) the device won't mount as USB-drive instead it just goes into charging mode. This wasn't the case earlier with the MacBook Pro (>10.7.3) and this isn't the case with a MacBook running still on Snow Leopard.
Therefore I assume that something has changed in the Mac OS X 10.7.4 particularly in the Finder?
Info:
MacBook Pro, Mac OS X (10.7.4), MacBook, Mac OS X (10.6.8)
After correct behaviour during 2 years Garmin Colorado only appears for a short time on the desktop from a MacPro with Snow Leopard 10.6.4 and disappears. Announcing an error: not correct disconnected. act is that the power of the colorado batteries had crashed down, and I didn't realize this in time. Additional Information: the Connect-picture on the Garmin-display stays permanently even when shutting down the MacPro. Correct disconnecting of the Garmin then is impossible. Further use of the Garmin requires disconnecting from the computer, causing new error. Questions: May be possible such behaviour has disrupted the USB-driver or some else software in the OSX or whatever, and what can be the source of the error? On WIN2000Pro same bahaviour: no connect.
View 1 Replies View RelatedHow do I uninstall the program, Garmin Road Trip from my iMac?
Info:
iMac, Mac OS X (10.7.3)
How many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?
View 22 Replies View Relatedalso, their all .avi video's. and i'm really confused! also, quicktime isn't letting me play .avi videos for some reason! and vlc won't download for me. and i'll put them on a USB but they wont download on my computer!
View 4 Replies View Related
