I have a MacBook Pro that I use sometime on Apple Cinema Display. On the USB ports of the display I attached an Western Digital external hard drive. Now, when I want to unplug my laptop from the display, should I eject the external hard drive first?
View 2 RepliesI have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedCan i use my iMac 21.5 as an external display for my Windows based pc?
Im look for a wired solution, not a airport or even using internet programs like VLC
Info:
iMac, Mac OS X (10.7.4)
Supposedly, the external is in use and cannot be ejected, but i don't think it's in use. I've only recently been encountering this problem, and i have no idea why. I've tried quitting every application, but it still claims to be in use.
View 4 Replies View RelatedI just got an external LaCie DVD burner (long story). It works great, but as of right now I can apparently only eject it by right-click > eject or drag it to the "trash." Is there any way to allow me to just use the button on the drive or tie it to the eject button on the keyboard when it's connected, or even another key command like Opt-Eject?
View 5 Replies View RelatedAnyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
Ejecting a cd from external drive
Info:
MacBook Air, iOS 5.0.1
I just bought a 640gig Samsung 2.5 inch / 5400rpm drive and threw it in a FW800 case from Other world computing. Running some test using the QuickBench 4 and AJA system test shows me that this little bugger is almost as quick as my internal drive on my MacBook Pro (Model number: WDC WD6400BEVT-00A0RT0). How can this be???? I did a varity of test with different file sizes and the Samsung get 70 MB/s vs about 84 MB/s for the internal drive.
My internal drive is pretty full vs this external drive that is currently empty. I do a lot of video work / large gigabyte files on the drive so perhaps I have a defrag problem? I really expected my internal drive to blow the FW800 connected Samsung out the water?
Supposedly, the external is in use and cannot be ejected, but i don't think it's in use. I've only recently been encountering this problem, and i have no idea why. I've tried quitting every application, but it still claims to be in use.
View 6 Replies View RelatedI just got an external LaCie DVD burner (long story). It works great, but as of right now I can apparently only eject it by right-click > eject or drag it to the "trash." Is there any way to allow me to just use the button on the drive or tie it to the eject button on the keyboard when it's connected, or even another key command like Opt-Eject?
View 1 Replies View RelatedI recently bought a new 1TB external seagate hard drive to use as media storage for FCP on my G5 quad.
I brought it home and started it up, partitioned into 3 pieces and then I ejected it.
Now it won't be recognized by my Mac. I feel like I've tried everything. Last night I unplugged the firewire and power cable, then this morning I flicked it on just to see what happened. It worked! I added some files to the drive and ejected it again to see if it would restart. Nothing...
So I waited another 15 minutes and tried again, nothing.
Any idea why the drive seems to turn into a brick after I eject it?
Hopefully it'll work after I wait another few hours again, but that doesn't seem like a working hard drive to me.
I have an iMac that I keep connected to an LG HDTV via Mini-Displayport to HDMI. I was wondering if there was any way to disable the external monitor without unplugging it? Turning off the TV doesn't actually disable the monitor as I still have the OS thinking it's still on therefore spaces imitates it as being two monitors when its really only one. The main reason I want to disable it is to save my VRAM while I'm playing Source games on Steam.
View 1 Replies View RelatedThis is a major issue for me, as I feel like I'm going to end up damaging my hard drive.
I am downloading a legal torrent to my external hard drive, however when I quit Transmission and try to eject my external drive, nothing happens. Snow Leopard doesn't even say it is in use like it is meant to. It just does nothing to eject the drive.
So I end up having to yank the USB plug out.
What gives? It ejects normally as long as I don't download to it.
How do I safely "eject" my 2 TB Seagate external hard drive after backing my Mac Air onto it? I need to update my operating software, never had since I first got it. So I bought the Seagate HD, plugged it in and Time Machine just started running. Now I'd really like to be able to confirm that my entire machine backed up completely, and I think it is best to unplug the hard drive before upgrading the OS...is that right?
Info:
MacBook Air, Mac OS X (10.6.8)
I am having problems ejecting the external hard drive that I use to back up my laptop. It is a 2012 MacBook Pro running Mountain Lion OSX 10.8.5. My external hard drive is a WD 2 TB My Book Studio. I use it to back up my laptop with Time Machine. Every time I try to eject my disk now I am told that "The disk (Diskname) wasn't ejected because one or more programs may be using it." I have tried some solutions like to stop Spotlight from indexing the disk and to try and turn off TimeMachine, but neither of these worked. The only thing that has worked so far is to log out of my user name and log back in with a guest user and eject it from there. This takes up a lot of time and is ultimately not really a sustainable way of working on my computer.
Info:
MacBook Pro, OS X Mountain Lion (10.8.5)
I was using an external drive for Time Machine for the past year and a few months On Saturday a message came up that it failed. I tried initiating the Time Machine again but failed. I decided to get a new bigger external drive to use for Time Machine. When trying to eject the external drive I was using it gives me this message:
Would it be safe just to force eject or log out and then log back in again to eject it so I can use my new external drive?
Info:
Mac mini, OS X Mountain Lion (10.8.3)
I use Expos�'s hot corners on my Al MB. I also use an external monitor at my desk. When I unplug the monitor to disconnect the laptop from being "docked" (as it were), I find that I can't use hot corners anymore. If I restart the Finder, that doesn't fix the issue. If I go to Expos� preferences, and change a hot corner preference (e.g., what gets done when one goes to the upper right corner), then things get fixed. But I really don't want to go to Sys. Prefs. each time I change monitors. Is there any other solution?
View 4 Replies View RelatedI rarely use my superdrive, so I thought it might be more practical to have the button eject my external hard drive(s). Is there a way to do this through OS X or a third party app?
Rather than empty the trash which now contains all the data on my external drive I ejected the external drive immediately. When I ejected the WD external hard drive the trash bin no longer displayed any trash inside of it, and when I re-connected the external drive the "trash" (contents of my external drive) appears again in the trash. Is there a way to break the connection which has formed between my data on the external drive, and my trash bin? I was simply trying to eject my external drive as I've done hundreds of times by dragging the icon to the trash/eject area. I don't want to risk losing the data. I restored my computer, and upgraded to Mavericks.
Info:
MacBook Pro (15-inch Early 2011), OS X Mountain Lion (10.8.5)
I recently received a Western Digital 1TB external HD for christmas. It has 2 partitions 1 for time machine backups and another just for some extra space . They are both set to Mac Os Journaled and work fine but when i connected it to my brother Windows laptop to get some music of his hard drive, it wasnt able to find the hard drive. i tried unplugging it and plugging it back in and nothing happened.
View 7 Replies View RelatedSuggested to move the original files to the EHD and leave the referenced files on the laptop to save space and still allow edits. My question is, if you are using Time Machine, what is it backing up on the LT and how do you apply this to the data on the EHD?
What I am trying to achieve is to move my Aperture library to an external HD. and clone it to a second drive and backup the laptop with Time Machine. After the next session I would again clone the 1st drive and rely on TM to continue to backup the LT.
Anyone have suggestions? I have a single 1.8ghz g5, 1gb ram, 10.4.10. I have a maxtor OneTouch III USB 2.0 200gb drive attached to it.
I can not seem to eject/unmount this drive. Every time i hook it up I just have to end up pulling the USB plug or turning the drive off suddenly to get it to "eject" but then i get the improper device removal error/warning message.
I have tried dragging to trash, I have tried apple E (which is what I usually do to any device) and I have tried going into disk utility and ejecting/unmounting from there as well. no dice.
Could any readers recommend an affordable basic external hard drive for a macbook air, which would also serve as a back-up for my old pc laptop? I don't need it to be portable, just to serve as back-up at home, though if it doesn't escalate the price too much wireless would be a bonus. I see there is a vast range of products available at a vast range of prices
View 1 Replies View RelatedI'm not a total newbie with mac and computers in general, but I cannot get the one and only super drive to eject... yes, I have hit the eject button, it shows the eject icon in the screen and nothing...how can I get the thing to eject?
View 17 Replies View RelatedI want to find the best way for a new college student to back up her MacBook Air files. Can she use cloning software and an external hard drive? I'm unclear if the Air supports attaching an external hard drive.
View 7 Replies View RelatedI have a 1TB Time capsule, I would like to attach a USB drive to the Time Capsule and transfer my iTunes Library to it so I can run itunes from wifi. I am new to network stuff. My current iTunes library is on a USB drive velcro'd to the back of my Macbook - rather inconvenient, the USB port is loose. The music files are external but the library files with ratings/play counts are in the iTunes folder.
Info:MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7), 1TB Time Capsule (3rd Gen)
Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
Info:
MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)
Can any body tell me how to eject my Garmin Ant stick from my USB port safely.I was told to go to Finder & eject by using the icon for the device.I have looked on finder & there doesnt show any device on there for me to eject.I did try ejecting by using the eject key on the keypad but when I pulled the stick out I got a dropdown warning me I had done it wrong.
Info:
Mac Book Pro, Mac OS X (10.7.3)
I have an early 2008 MBP 15" (I think detailed specs are in my signature) and recently (over the last week or so) when I move my laptop display up and down (physically), the screen has this thing where it gets inverted and what not. It is very annoying, and I have been having to constantly fiddle with it everytime I move my laptop around (I use it both as a desktop and as a laptop, so this happens a lot). I recently switched to using it clamshell mode as a means of avoiding this in desktop mode, but occasionally I'll still need to move it around places and what not. I was wondering if anyone has had this problem before, or has any ideas as to what might be a better solution. I would take it in for repair, but I don't really have 300+ dollars to spend on a repair right now. I think it might be related to the data cable connection to the display of the computer, since it is rather intermitment, and requires fiddling for the screen to not be inverted/messed up/displaying black lines, etc. I can post more details about it, pictures or something if that would help any of you geniuses out there as well.
View 2 Replies View RelatedI have a 500gb Verbatim external drive that I can't see in Finder. I've tried to restart, but with no luck.
Info:
iMac, Mac OS X (10.7.2)
