When I close the lid, select sleep from the  menu, or push the power button, and select "sleep" my MBP will not go to sleep as it ussually does. It has been doing this since I performed the last set of software updates (Mac OS X Lion 10.7.4 (11E53) about a week ago. Â
Info:
MacBook Pro, Mac OS X (10.7.4), (MacBookPro3,1)
I have an aluminum Intel (2007) iMac and I have had it for two years now. I love my Mac and would never go back to a PC now, BUT (you knew that was coming) I have recently (unfortunately I don't know exactly when) developed a problem in that my iMac will not auto sleep. The screensaver will kick in OK, but it will not go to sleep on its own. I can put it to sleep from the menu manually, but not by the setting in System Preferences. I have reset the PRAM, and the SMC and neither of those changes have worked. Have any of you had this issue and solved it?
View 2 Replies View RelatedThis is my first post and I've a couple of questions and did searched for it on the internet but unfortunate ...For my study Multimedia designer, I am planning to get a Mac Pro but my school wants us to get a D*ll V laptop, windows 7 with these software:Adobe CS4 Master CollectioMicrosoft Office Enterprise 2007Microsoft Office Project Professional 2007I didn't choose for this D*LL laptop because its a 17,3" one and with my schoolbooks and etc in my bag, it would be pretty heavy for me.I hope that someone in this forum knows the answers on my questions and I really appreciate your help cos I even asked my friends and family about it but unfortunate, no luck so far
View 4 Replies View RelatedI leave my Air on pretty much all the time, and put it to sleep while moving around etc. Sleeping it disconnect the Airport connection - which if very annoying. At a desk I've just been dimming the display all the way off in order to keep my connection.
However, I recently noticed that by setting a "sleep display" hot corner, my network connection is maintained.
I have 2 questions:
1) Is sleep display equivalent (functionally) to simply dimming the display all the way down?
2) Is there a way to either set up a shortcut to sleep the display (other than a hot corner) and/or set it so that only the DISPLAY sleeps after 'x' minutes?
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
View 11 Replies View Related I have a macbook pro 13" early 2011 and I'm se as shown in the pictures (since i upgraded to os x yosemite) . It happens after display sleep or computer sleep on login not on boot up .I've noticed that i run out of ram when the problem appears (only 15MB RAM available out of 4GB), though i doesn't happen every time . I've talked to service and told me its either motherboard replacement or because the ram isn't enough (gpu shares with main ram) so maybe i should try upgrading ram. URL....
Info:
MacBook Pro, Mac OS X (10.6.8)
I have torrents going all the time. If the computer goes to sleep, the internet disconnects, so they stop. Display sleep wouldn't disconnect though. Is it OK to have computer sleep on "never" but keep display on "15 minutes"? I don't usually even leave the computer on overnight.
View 3 Replies View Relatedi tried mroogle and search but i couldn't find exactly what i was looking for and i know this community knows it all.
i am trying to prevent my new 2010 macbook pro from going to sleep when the lid in closed. i know there are programs that do this but they keep the display on as well. I wanted to know if there is a program that does it and has the option of turning off display. i am running snow leopard 10.6
Recently I've started connecting my 2.5GHz Intel Core 2 Duo (pre-unibody) Macbook Pro 17" to an external monitor (via DVI). Â
Since then my computer goes into Safe Sleep instead of Sleep (it's plugged into power). Â
This is an annoyance I'd rather avoid because even if all programs relaunch:I have to wait for them to launch (longer)Programs like Excel seem to have been quit in an unorthodox fashion: when it starts back up I get an error notice that it was shutdown inappropriately & the doc which reopens is a rescued version of the doc I had open before the safe sleep.Â
Info:
MacBook Pro (17-inch Early 2008), iOS 7.1.2
How can I tell if my mid-2007 Macbook is USB 2.0 compatible? I don't see that designation when I click on "USB" in the System Information pane. Â
But I need to buy an external hard drive, and the ones I like say they're USB 2.0 or 3.0.Â
Info:
iMac, Mac OS X (10.6.4)
I am looking to hook up my 2007 Macbook Pro (2.4 Ghz 15 Inch Screen) to my sony bravia 32 inch TV. Seeing how this particular model of macbook pro, although very hardy and has lasted me through now, the screen at the bottom is cracked and will probably at some point snap (annoying...). Â
Anyway! Just a note to start, I no longer have my original display adapter that came with my computer, it was lost at some point in the move out of my parents house and I do not remember what the hook up is. I purchased an SVGA moniter cable from radio shack since I can hook that up to my TV. I then went to the PX here on base and purchased a mini display port to VGA adapter for my computer, but alas I do not have this hook up on my computer (although the vga adapter end works, obviously).Â
This is what I'm assuming I need...can I get this to vga adapter?Â
Info:
MacBook Pro, Mac OS X (10.5.8)
I want to increase the capacity of my MBP (2007). Is this HD compatible : "Seagate Momentus XT Hybrid 750 Go 7200 TPM" ?
Info:AppleTV 2
My 2007 Macbook won't boot. When you press the power button it starts as normal, the apple appears and the spinning circle starts. Then the screen goes grey and it sits there. I have to press the power button to shut it down. I took it to a service shop who told me that the hard drive was dying so I replaced the old drive with a new ssd and a fresh install of Lion. No difference. Still won't start. I refreshed the PRAM but made no difference.
Info:MacBookPro, iOS 5.1.1
Can I add 2x2GB mem sticks in my 2Ghz Intel Core Duo MacBook (2007)? ie. 1x2GB mem stick per slot. Model Identifier: MacBook1,1Â
Info:
MacBook, Mac OS X (10.4.11)
It will read CD's and burn CDR but thats all. When I insert any dvd the lazer loudly slides back and forth then spits out the dvd after several minutes. Is there a solution for this, other than replace drive? Is UJ-85J-C the only drive that will fit? If not, what other drives fit?
Info:
MacBook
Pro, Mac OS X (10.6.8), 17" 2.33core2duo. 3g ram. ATIx1600
i was wondering if you can put microsoft office 2007 on a macbook
View 4 Replies View Related[URL] MacBook SMC Firmware Update 1.4 is available either through Software Update or via direct download, and is applicable to the following models:
MacBook (13-inch Late 2007)
MacBook Pro (17-inch, Early 2008)
MacBook Pro (15-inch Early 2008)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
A friend of mine ran into the most surprising thing when he booted up from his MacBook. Instead of seeing the Apple logo, he saw a question mark - ?.
I told him to try and boot from his Install Disc 1 and it managed to as the Apple logo along with the busy progress bar was shown. Then the usual language selection. I told him to select startup disk from the utilities menu and he said that all he could see is network startup and the Mac OS install disk. Even when he tried to repair disk, it said that it wasn't mounted.
I bought my 13" Macbook Sept 2007 and I've cleared it off and reinstalled everything once since I bought it just to keep it clean.
I haven't had any problems until yesterday (June 28, '09), I tried to start it and it won't go past the gray screen with the logo and spinning disc.
I've tried these suggestions:
[URL]
None of these have worked. Tried the PRAM, taking out the batter and adapter and holding down the power key etc.
Going to buy me a MBP (first Mac ever) when they, hopefully soon, get updated..
At work at for studies i'll be using MS Word a lot and even more Excel!
Have used these programs in their Windows version for ages and i can't "afford to lose" the skills i've build with them, when switching to my new Mac..
Have heard a lot about the 2008 Mac version of Office isn't quite the same A's the 07 Windows version!
Long story short: Will i be able to - with no problems, lag or anything like that - run MS Office 07 from a Win 7 partition using either Fusion or Parallels?
Shouldn't that work exactly the same as on my current PC?
I currently own a Mid-2007 entry-level MacBook. It's 3 years old now (I bought it for university), so now at the end of my degree I'm slightly curious as to the notebooks that Apple have in their line-up right now. I could probably stretch, if I were to buy one, to the entry-level 13" MacBook Pro. My question is, and this is just curiosity - is there much to be jealous of in the current entry level 13" MacBook Pro, compared to what I have now? I upgraded the RAM to 2GB and the HD to 500GB in the one I have now, but still I get jealous when I see pictures of the MBP - should I be? Or is what I currently have now not too bad?
View 6 Replies View RelatedInstalled Lion successfully on my 2007 MacBook Pro. First run went OK. Tried restarting and won't boot. No Chime... nothing. SMC reset and PRAM reset don't do anything. Sleep light comes on for split second, optical disk engages momentarily, then all goes dead. Screen stays black. Attempted start without RAM seems to indicate logic board is working. Getting repeating tones. Flashing light when I press and hold power is the most I can get with the memory installed.Â
Info:
MacBook Pro, Mac OS X (10.7.4), 2007 MacBook Pro - 4 GB RAM
Upgraded my macbook 2.16 to 4 gig ram and installed SSD Reinstalled snow leopard Runs Beautifully fast but VERY HOT Extremely hot Is this to be expected?
Info:MacBook, Mac OS X (10.6.8)
I have a late 2007 13 inch Macbook. It;s still a fantastic piece of kit.Â
I want to know if the new standard of USB 3.0 devices (like simple memory sticks) will work with my machine… are they compatible with USB 2.0 machines??Â
Partly I'm thinking of buying th newest standard now for the future Â
I have a MacBook C2D 2GHz, 4gigs of ram from mid 2007. It has snow leo v. 10.6.4.
I cant remember when the problem appeared but maybe 6 months ago.
Every time the mac is rebootet or shutdown the screen goes black the sleep light stays on but I can hear the chime and cd drive make shot start up sound.
Recently my battery health has dropped to 21% with only 79 cycles. I have tried calibrating the battery and have always done it at least once a month. Just this morning I was running on battery power and it shut off with 65% of charge left. I'm off to college in a month and am wondering if Apple will replace my battery even though I'm not under warranty.
I would take it to an Apple Store but unfortunately the closest one is an hour and a half drive away. Should I try calling Apple?
I thought I'd post my early findings. I have a late 2007 Santa Rosa MB in white, 4GB and 2.2 Core 2. Mine came with Leopard and still included the remote.
Anyway, I was a bit leery about SL, because this is a little older, but I did a in place upgrade, it took about 45 minutes.
I must say, things feel quite a bit snappier, even the graphics around the dock and windows. It boots up a little faster and seems to shut down pretty fast.
I've heard mixed things about things being slower for some people, but I can say this feels nicer. I'm still poking around to see what else has changed.
One thing of note, my Brother MFP's little control center app was removed in the process but the driver is still there. So I need to find how out how I am going to scan and stuff over the network.
Overall I am very happy with the upgrade, I'm just glad it's not slower.....
I tried installing Snow Leopard on my Late 2007 MBP with the installation disk I got with my 2009 MBP but I figured out that it wouldn't work because the installation disc would only work on the new machine not the old one. Anyway, now when I boot, I get the usual installation guide but the disk won't eject. I went to Disk Utility-->Eject Disk but it gave me a warning message that it couldn't be ejected because some applications were being used. I have no idea what that means and why it wouldn't eject the disc!
View 2 Replies View Relatedmy old, mid 2007 macbook had a firewire port that I plug my HD I use for time machine in (it can also be used as USB as well but I prefer it use firewire since I have uses for the two USB ports). Anyways, this new Macbook Pro I have has one too. Except... the connection is smaller on my new Macbook Pro... So I'm guessing there are different connection sizes and I need a new firewire cable? I think my current cable has the same size that both connects to the hard drive as to my old macbook. What labelling would I need to find to find a cable with the bigger connection on one side and the smaller connection on the other
View 2 Replies View RelatedI know from reading on here the edges cracking off macbooks was a common issue (mine's from Nov 2007) - I was just wondering if anyone had managed to get it repaired for free outside of warranty? I was considering getting a new macbook in August but if I can get the edges repaired I might go for a new iPhone or iPad instead.
View 2 Replies View Related