I would like to buy a new MBP but would need to remove Snow Leopard and install Leopard. Is this possible? I know Snow Leopard can be installed on older machines but an not sure if Leopard will run on a newer model...?
Never mind why, but I have reasons for needing to do this.
I'm trying to install Mac OS X Snow Leopard on to my macbook but I keep getting this error.
"mac os x installation couldn't be completed" I get this message usually within 5 minutes of installation.
My macbook specs are...
Mac OS X Version 10.5.8, 2.16 GHz Intel Core 2 Duo, 1 GB 667 Mhz DDR2 SDRAM
I've already tried repairing the disks. (I repaired my leopard with the snow leopard CD because I couldn't find the leopard CD.
I heard it was fine to do.) I would have tried to verify and repair the partition but the buttons seemed to be grayed out for some reason.
Here is the error log...
[URL]
(sorry for the download, forum rules. "the text that you have entered is too long (123483 characters). Please shorten it to 20000 characters long.")
Will it install like the OS does on the iPhone, as in the existing data isn't put in a new folder? What exactly happens when you install a new OSX?
View 1 Replies View RelatedMy wife's Macbook (2.0 Intel Core Duo) is not recognizing the Snow Leopard disc, and I'm not sure why. I initially thought that even though Apple is saying that all Intel's are compatible with SL, they focus on the Core 2 Duo's and since her computer is technically a single core, it wouldn't work. Everything I have read has stated that SL will just run in 32 bit mode with Core Duo's - so I'm pretty confused. As for it being a bad disc, it's recognized immediately in my MBP...
View 4 Replies View RelatedI just received my new unibody macbook today with a 160gb hd and snow leapard installed, I also purchased a new 500gb hd and want to install snow leapard on the new hd how would I go about doing this? (I don't need to do any backup being I haven't even turned on my macbook yet!) I just need to install snow leaprd on the new hd and put it in my macbook.
View 2 Replies View RelatedSo I'm in a unique situation. I'm upgrading my Tiger Macbook that has a broken screen (only top 1/3rd is visible) to Leopard. The problem is, the Leopard installer runs on the primary display so I can't see the installer properly. I've tried blind clicking to no avail. I was wondering if there is anyway to use the Leopard installer with an external screen? I've searched the internet to no avail and was wondering if I could get a definitive answer for this problem. I've just ordered a new screen for the Macbook and am going to try to DIY replace it.
View 5 Replies View Relatedmy white macbooks hard drive broke along with my cd drive. I purchased a new hard drive and put it in but now I have no way to install Leopard since my cd drive is broke.I do understand the best way would be to buy an external CD drive and use that but I would rather not waste all that money on one use.I do have a firewire cable and my friend has a white macbook. I've heard that you can boot using another computer and use there cd drive via firewire by holding "T" or whatever.
View 4 Replies View RelatedI just bought a brand new 13 inch Macbook Pro. Is it possible for me to use the Mac OS X install disk that came with it to install Leopard on my June 2006 Macbook, which is currently running Tiger? I've attempted to do so a couple of times and have gotten an error message.
View 3 Replies View RelatedIt just hangs at the spinning pinwheel. I shut the machine off and booted it into Verbose-mode (Command-V) and it stops at "Initializing Power Manager" or something very early on. I pulled the battery and unplugged the machine, am letting it cool off (not that there's a point) -- it's one of the original MacBooks that had that "shutoff" problem with the wire that'd melt and short to the heatsink but mine never had the issue because I wasn't using it very often at the time. Any ideas? The drive does show up when I hold down Option.
View 24 Replies View RelatedMy MacBook Pro will not go to sleep after installing Snow Leopard. It WILL go to sleep if I close the lid; however, if I have it sit open for 15 minutes, it won't go to sleep. It attempts to sleep, but instead the screen will just go black for less than a second. It's just like a flash of black, and then the screen goes back to normal. It simply won't sleep.
View 24 Replies View Relatedi got my first Mac today and it didn't come with snow leopard installed but it did come with a snow leopard disc. the problem is whenever i try to upgrade, i insert the disc, it stay's in for about 30 seconds making weird noises, and then it spits the disc back out. i'm very new to mac, today is my first time ever using one so i really don't know what to do so i came here. i have a 13 inch MacBook Pro running on OS 10.5.8. also, i installed iWork perfectly fine so i'm guessing it has to do with the disc.
View 4 Replies View RelatedI'm trying to install OS X on an Intel X25-M SSD. I'm at the point where it asks to select the disk where you want to install Mac OS X but no disks are showing as available. I can see that the computer recognizes the Intel SSD in Disk Utility but it says it's not formatted. Is that the issue?
View 16 Replies View Relatedi was looking to install Snow Leopard from a second hand mac book pro (year 2010) I just bought onto my old 2008 Macbook. But the install DVD from the mac book pro would not install. My Mac book has an Intel 2.2GHz processor, 4GB of memory and 7.1 GB of free space on the hard drive. It comes up with a screen just saying it cannot be installed on this computer.
View 5 Replies View RelatedI bought a 2009 Macbook, from a friend that needs a new hard drive, but he doesn't have Snow Leopard disc that came with Macbook. I have a Macbook Pro that came with Snow Leopard. I have upgraded it to Lion. Can I use my old Snow Leopard disc on the Macbook, after I put in the new HDD??
Info:
MacBook
I want to install a SSD into my MacBook Pro (mid-2010). So, after I install the new SSD, I need to reinstall my OS (Snow Leopard). But the internal DVD player is broken. I have an external DVD player, but I am afraid the Mac will not recognize it because when I plug the external DVD player to the mac with USB cable, there will be no operating system on the mac. Am I just worried too much? Can I just install OS x from an external DVD player?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
I think I'm going to format my hard drive to delete everything from it and start fresh with leopard. I already have leopard installed, but I think I should just format my hard drive (after backing up what I truly need like my music and other files) and then just install leopard.
Question, I have read that I go to disk utility to do this (format and install leopard), is this correct? If so, what else do I need to know before I do this?
Alright first of all, Hello to you all, I've been reading this forum for a couple of month even though this is my first intervention and i need a tip. Alright my situation is the following: I have:
-Macbook Pro Unibody
-Macbook C2D
-Snow leopard Disc x2
-Snow leopard image I cloned to a hard drive partition.
The situation is I have bought two licenses for Snow leopard because i have two macs. The macbook pro is the computer i use everyday and is fully functional. The macbook however took a big drop about a year ago and the display was totally broke along with the DVD and the hard drive. I retrieved an old HDD i had with leopard installed and put it in the macbook along with an external display and i now use this computer as a media center. The problem is i want to install snow leopard on it. The DVD drive is broken hence the reason i made a disc image and i wanted to install from the disc image. SO i restart the macbook with the alt key and as expected, the image from the usb drive is detected and i launch the install. The problem comes from the fact that when the installation starts, the external display is set as secondary display and i cant control the installation which is displayed wont eh broken display. Is there a way to remotely install SL or to set the external display as only display at boot through holding a bunch of keys?
I would like to install Snow Leopard on my Macbook Air Rev A as I have work to do that requires 10.6.x - however I didn't buy the Superdrive so need to do this as a remote install.
I have a PC with a DVD drive and can install the software; I also have the USB ethernet dongle and assume this will be better to use than over Wifi
Has anyone got any hints about doing this? I'm slightly nervous about installing an OS upgrade over a network for some reason..
My hard drive recently crashed. I just bought a new one and installed it myself. Now it's simply a matter of reinstalling the operating system, which is where I'm having trouble. I insert the Snow Leopard Install DVD into the drive. I power on the computer and hold 'C' (I've tried Option too) to boot from the disc, but it doesn't work. It spits out the disc after a few seconds, whether I hold 'C' or not, and then it gives me a folder icon with a question mark in it in the center of the screen, the same thing it showed when my hard drive first crashed.
Info:
MacBook, Mac OS X (10.5.8)
I have 11 software updates. The machine says in need to restart to install. I am in an infinite loop where it just keeps restarting and never installing the updates.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a tower Mac Pro with Snow Leopard running on it.Unfortunately one of the software that I use doesn't have yet a Snow Leopard update. So I am thinking maybe I can install older version of Leopard on one of the internal drives (i have 3 additional internal drives), so I can boot my computer from either Leopard or Snow Leopard, depending on needs (i don't want to get rid of Snow Leopard).
I never installed OS X system before, so I am a bit scared.The internal drive is ready, I have the old Leopard on disks, what are the next steps to take?
I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.5.1)
[URL] nor any twitter apps like tweetie or twitterific will load for me on my macbook pro since installing snow leopard.
I can login fine on my iphone and windows 7 pc on the same network. firewall is off on my mac. I have tried firefox and safari and clearing the cache. It just 'fails to open page' on safari and firefox. I have an AirPort Extreme router.
Clearly we need to boot from an external hard drive of some sort, but we don't currently have the ability to do that. I have the disc, but his optical drive is shot. Is there a way to boot from my optical drive onto his computer? Or if I make a disk image on my computer, can I somehow boot from that disk image?
View 6 Replies View RelatedAfter installing snow leopard I've had constant issues with mobileme, first with data conflicts, after I choose which data I think is correct (I usually guess) it then (sometimes after several minutes) constantly props me for a password. It's constantly saying this:
It says this WHILE LOGGED IN, I've logged out a million times and logged in, the password is correct. After I log out and try to log back in, it also gives me this error.
Since installing Snow Leopard, I have noticed that my Mac will wake randomly. It does not happen all the time, but it does a lot. I have tried to reset the PRAM and it did not help. The "Wake for network access" option in Energy Saver is unchecked. Any ideas?
View 1 Replies View RelatedI have a Macbook pro 17" 2008 model, and I just bought a new 160gb Intel X-25m solid state hard drive. I installed it into the mac with no problem, but when I boot up with the OS boot disc 1, the drive doesn't show up in the "destination" screen. No drives are there. When I open Disk Utility the drive is there, and shown as read/write, but when I boot with option held down the drive isn't there either. I can't even do any repairs on the drive in the disk utility.
View 4 Replies View RelatedWhile installing software update MacBook pro froze,I could see a white screen without progress bar.the external hard drive was plugged in at the time. It has been 3 hours already.I just unplugged external hard drive and don't know what to do next..
View 1 Replies View RelatedMacbook pro, got flashing folder icon. So i tried installing snow leopard. When it got to where i want to install it, there were no options.
View 2 Replies View RelatedQuestion in the title - just wondering if I will need to upgrade to Leopard before Snow Leopard.
View 3 Replies View Related