MacBook Air :: Installing Snow Leopard With Remote Install?
Apr 21, 2010
I would like to install Snow Leopard on my Macbook Air Rev A as I have work to do that requires 10.6.x - however I didn't buy the Superdrive so need to do this as a remote install.
I have a PC with a DVD drive and can install the software; I also have the USB ethernet dongle and assume this will be better to use than over Wifi
Has anyone got any hints about doing this? I'm slightly nervous about installing an OS upgrade over a network for some reason..
View 10 Replies
ADVERTISEMENT
Oct 7, 2009
i was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies
View Related
Mar 31, 2010
My dvd drive is busted, so I'm attempting to use remote disc to install snow leopard on my macbook pro (running 10.5.5). There doesn't seem to be a clean install option without running the snow leopard disc from boot. Is there any way that I can run the install disc from boot via remote disc so I can run a clean install? I tried restarting my computer and holding down the alt/option key, which showed the only available boot drive as my macbook pro's internal hard drive.
View 1 Replies
View Related
Aug 25, 2009
I purchased a copy of SL that I want to install on my MBA. I know that Leopard can be installed using the remote disk feature since my MBA doesn't have a DVD drive. problem is that I can't find anywhere saying that SL will support that function. Although I did see that the minimum system requirements require a DVD drive, but it doesn't say anything about a remote drive.
I'm sure it would be stupid if it wasn't supported, but then again you can't installed XP without the SuperDrive.
View 6 Replies
View Related
Aug 31, 2009
My macbook's optical drive doesn't work so I was hoping to find a way to remotely install Snow Leopard. I've got the most recent Leopard update. I could really use that extra six gigs!
View 1 Replies
View Related
Dec 31, 2010
ok, so this is my problem. i have Windows, PC based computer, but, i installed Mac OS X 10.6 snow leopard [don't hate, i just could, lol] and i have a little problem cause it can't 'read' my keyboard. how to install a keyboard?
View 2 Replies
View Related
Dec 24, 2009
I've staved off installing Snow Leopard but a ready to jump in now. Big question: Does it need a clean install or is the upgrade from the CD OK?
View 6 Replies
View Related
May 13, 2012
I've just finished a clean installation of Snow Leopard on My MacBook Pro. I've got a cd, called "Applications Install Disc", from which i was supposed to install Iphoto etc. But when i start installing, it says "Installation Failed". It says that an unknown failure has occured. Now i can't install these programs, and it's pretty sad.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 9, 2012
I'm looking for a system that can track about 50 MBP's providing both remote wipe as part of an overall security protocol, and also remote screen/desktop for admin purposes. I looked at preyproject.com but it looks like they only do remote wiping/tracking. that I don't want something locked to a single user, it should be centrally managed.
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 31, 2012
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 29, 2009
I just bought a brand new 13 inch Macbook Pro. Is it possible for me to use the Mac OS X install disk that came with it to install Leopard on my June 2006 Macbook, which is currently running Tiger? I've attempted to do so a couple of times and have gotten an error message.
View 3 Replies
View Related
Aug 31, 2009
My wife's Macbook (2.0 Intel Core Duo) is not recognizing the Snow Leopard disc, and I'm not sure why. I initially thought that even though Apple is saying that all Intel's are compatible with SL, they focus on the Core 2 Duo's and since her computer is technically a single core, it wouldn't work. Everything I have read has stated that SL will just run in 32 bit mode with Core Duo's - so I'm pretty confused. As for it being a bad disc, it's recognized immediately in my MBP...
View 4 Replies
View Related
Nov 11, 2009
I just received my new unibody macbook today with a 160gb hd and snow leapard installed, I also purchased a new 500gb hd and want to install snow leapard on the new hd how would I go about doing this? (I don't need to do any backup being I haven't even turned on my macbook yet!) I just need to install snow leaprd on the new hd and put it in my macbook.
View 2 Replies
View Related
Dec 21, 2010
I'm trying to install Mac OS X Snow Leopard on to my macbook but I keep getting this error.
"mac os x installation couldn't be completed" I get this message usually within 5 minutes of installation.
My macbook specs are...
Mac OS X Version 10.5.8, 2.16 GHz Intel Core 2 Duo, 1 GB 667 Mhz DDR2 SDRAM
I've already tried repairing the disks. (I repaired my leopard with the snow leopard CD because I couldn't find the leopard CD.
I heard it was fine to do.) I would have tried to verify and repair the partition but the buttons seemed to be grayed out for some reason.
Here is the error log...
[URL]
(sorry for the download, forum rules. "the text that you have entered is too long (123483 characters). Please shorten it to 20000 characters long.")
View 2 Replies
View Related
Jul 8, 2009
Will it install like the OS does on the iPhone, as in the existing data isn't put in a new folder? What exactly happens when you install a new OSX?
View 1 Replies
View Related
Apr 2, 2012
This is the first time i reinstalled(clean install) my snow leopard on my MBP. All went fine but then i inserted the disc for bundled application (which contains the ilife apps) but it keeps failing.
It says that "the installation failed. the installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance".
I've also done my research on this matter. I've gone thru a few steps i tried as below without success:
1)normal install - fail
2)repair permission - fail
3)install in safe mode - fail
4) install using another admin acc - fail
5) made an image out of the disc and install - fail
6) used a similar disc(my dad's since we have identical version) - fai
7)updated my system and install - fail
8) reinstall the mac - fail
i cant think of any other solution as im a bit noob when it comes to mac. is there any other things i could try before taking it Apple?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Aug 28, 2009
It just hangs at the spinning pinwheel. I shut the machine off and booted it into Verbose-mode (Command-V) and it stops at "Initializing Power Manager" or something very early on. I pulled the battery and unplugged the machine, am letting it cool off (not that there's a point) -- it's one of the original MacBooks that had that "shutoff" problem with the wire that'd melt and short to the heatsink but mine never had the issue because I wasn't using it very often at the time. Any ideas? The drive does show up when I hold down Option.
View 24 Replies
View Related
Aug 30, 2009
My MacBook Pro will not go to sleep after installing Snow Leopard. It WILL go to sleep if I close the lid; however, if I have it sit open for 15 minutes, it won't go to sleep. It attempts to sleep, but instead the screen will just go black for less than a second. It's just like a flash of black, and then the screen goes back to normal. It simply won't sleep.
View 24 Replies
View Related
Sep 4, 2009
i got my first Mac today and it didn't come with snow leopard installed but it did come with a snow leopard disc. the problem is whenever i try to upgrade, i insert the disc, it stay's in for about 30 seconds making weird noises, and then it spits the disc back out. i'm very new to mac, today is my first time ever using one so i really don't know what to do so i came here. i have a 13 inch MacBook Pro running on OS 10.5.8. also, i installed iWork perfectly fine so i'm guessing it has to do with the disc.
View 4 Replies
View Related
Apr 19, 2010
I'm trying to install OS X on an Intel X25-M SSD. I'm at the point where it asks to select the disk where you want to install Mac OS X but no disks are showing as available. I can see that the computer recognizes the Intel SSD in Disk Utility but it says it's not formatted. Is that the issue?
View 16 Replies
View Related
Apr 29, 2012
i was looking to install Snow Leopard from a second hand mac book pro (year 2010) I just bought onto my old 2008 Macbook. But the install DVD from the mac book pro would not install. My Mac book has an Intel 2.2GHz processor, 4GB of memory and 7.1 GB of free space on the hard drive. It comes up with a screen just saying it cannot be installed on this computer.
View 5 Replies
View Related
May 16, 2012
I bought a 2009 Macbook, from a friend that needs a new hard drive, but he doesn't have Snow Leopard disc that came with Macbook. I have a Macbook Pro that came with Snow Leopard. I have upgraded it to Lion. Can I use my old Snow Leopard disc on the Macbook, after I put in the new HDD??
Info:
MacBook
View 4 Replies
View Related
Dec 1, 2014
I want to install a SSD into my MacBook Pro (mid-2010). So, after I install the new SSD, I need to reinstall my OS (Snow Leopard). But the internal DVD player is broken. I have an external DVD player, but I am afraid the Mac will not recognize it because when I plug the external DVD player to the mac with USB cable, there will be no operating system on the mac. Am I just worried too much? Can I just install OS x from an external DVD player?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 18, 2010
i have a brand new 15" macbook pro (snow Leopard), my sister uses my old 15" macbook pro (leopard) and my brother uses my old 17" imac (white one, with leopard) and i need to help them from time to time while im away.. for some reason screen sharing dosent work and neither does ssh in terminal..
is this a typical issue between Leopard and Snow Leopard?
View 9 Replies
View Related
Jul 14, 2010
Did a search through here but couldn't find anything concrete. What are the differences between a fresh Snow Leopard install and a factory Snow Leopard install? I ask because I bought an Intel SSD and don't know if I should bother cloning the hard drive that will come with my new 15" MBP or I should just install a fresh copy from a Snow Leopard install disc. I'm aware macs come with next to no junk pre-installed, but are there some factory settings that are worth preserving if they aren't documented well?
View 11 Replies
View Related
Sep 4, 2014
I tried to install Snow Leopard on my MacBookPro but it cannot install and cannot be ejected. I need to eject.
The reason for this is a long story. My logic board was replaced and my Mac was wiped clean. I am not trying to recover from back up but could not figure out the next step after the recovery finished. So I tried to install OSX from the disk that came with my Mac. Probably not the right corrective action.
I need to remove the Snow Leopard DVD and finish my recovery.
View 4 Replies
View Related
Mar 21, 2012
I am tryiing to connect to a remote desktop servere which , I think, is Windows based. I know the IP address which, for example, is 123.45.67.891:2345
When I type this into the "connect remote server" (Finder>Go> Connect remote server) Apple adds a prefix afp:// . In the "missing manual" book by David Pogue he suggests the prefix ought be smb:// for a windows server. Either way, a dialogue box informs me that attempt has failed whem I try to connect
Info:
MacBook, Mac OS X (10.6.7)
View 5 Replies
View Related
Jun 2, 2008
Well, my question is very simple: I have a MBA and this other laptop from work, a crappy HP which is old as hell. I'm planning to use Remote Disc to reinstall my Leopard, since the upgrade to 10.5.3 really screwed things here, and I can't figure out why. Point is: instead of running all Leopard installation thru Remote Disc, I would prefer to share Leopard disc 1 over Remote Disc and restore it to a partition on my external HD, making a clone of it, which would install *much* faster. Has anyone tried anything like this? There's any Windows program which allows me to rip a Mac DVD to a Mac partition?
View 2 Replies
View Related
Sep 1, 2009
Alright first of all, Hello to you all, I've been reading this forum for a couple of month even though this is my first intervention and i need a tip. Alright my situation is the following: I have:
-Macbook Pro Unibody
-Macbook C2D
-Snow leopard Disc x2
-Snow leopard image I cloned to a hard drive partition.
The situation is I have bought two licenses for Snow leopard because i have two macs. The macbook pro is the computer i use everyday and is fully functional. The macbook however took a big drop about a year ago and the display was totally broke along with the DVD and the hard drive. I retrieved an old HDD i had with leopard installed and put it in the macbook along with an external display and i now use this computer as a media center. The problem is i want to install snow leopard on it. The DVD drive is broken hence the reason i made a disc image and i wanted to install from the disc image. SO i restart the macbook with the alt key and as expected, the image from the usb drive is detected and i launch the install. The problem comes from the fact that when the installation starts, the external display is set as secondary display and i cant control the installation which is displayed wont eh broken display. Is there a way to remotely install SL or to set the external display as only display at boot through holding a bunch of keys?
View 3 Replies
View Related
May 24, 2012
My hard drive recently crashed. I just bought a new one and installed it myself. Now it's simply a matter of reinstalling the operating system, which is where I'm having trouble. I insert the Snow Leopard Install DVD into the drive. I power on the computer and hold 'C' (I've tried Option too) to boot from the disc, but it doesn't work. It spits out the disc after a few seconds, whether I hold 'C' or not, and then it gives me a folder icon with a question mark in it in the center of the screen, the same thing it showed when my hard drive first crashed.
Info:
MacBook, Mac OS X (10.5.8)
View 3 Replies
View Related
