I bought a pair of beat's by dr.dre wireless bluetooth headphones and they work fine with my iphone but not my macbook pro. "error while connecting the device"..comes up when I try to sync them with my macbook pro.is it possible that a bluetooth transmitter would help ?
Info:
MacBook Pro, Mac OS X (10.7.3)
Today my mouse ran out of batteries, so I went to get some new ones. I replaced them, the light on my mouse went on, and it seemed to be working. But, when I tried to move my clicker thing *on the computer* with my mouse, it didn't move. So, I looked at the bluetooth symbol on my computer, I'm on a MacBook, and it showed that my mouse wasn't connected. So I tried turning off the bluetooth, shutting off my mouse and turning it back on, taking out and putting the batteries back in the mouse, and none of these worked. So I went to "Browse Device" and my mouse was there, I clicked on it twice and it said "There was an error connecting to the device". I also deleted it from the bluetooth list, and I am now unable to get it back on the list!
View 1 Replies View RelatedMy device does not show in the sound tab (output) even after connecting the HDMI. How do I get audio in my T.V. now?
View 1 Replies View Relatedmy macbook pro had an error in regards to something like a usb device has used to much power and has now been closed. Since then the mac won't recognise any device i put into the usb port
Info:
MacBook
Pro
I am getting a message when trying to boot up, which reads: "No bootable device - insert boot disk and press any key"
i have tried to shut down and boot up pressing the shift key, this did not work.
Info:
MacBook Air
iTunes (11.2.2) locks up when I connect a device (iphone/ipad). I force quit the app and restarted to no avail. I have reinstalled the same version of iTunes, but the problem continues.Â
Info:
iMac (21.5-inch Mid 2010), OS X Mountain Lion (10.8.3)
I'm receiving the "no boot-able device insert boot disk and press any key" error every time I go to turn on my macbook air. The screen chimes, turns on and then goes black. I've been holding down the option key and that seems to work but do I have to do this every time I turn my computer on from now on?
View 2 Replies View RelatedWindows 7 has been awesome so far, but there are still the occasional driver issues. What I'm having trouble with now is firewire. I used to use HFS Explorer to access my external (HFS formatted) hard drive but it no longer shows up in HFS Explorer. Windows doesn't even make the "device connected" sound when I turn it on (yes I'm running HFS Explorer in admin mode/Vista compatibility). Pretty sure it's a firewire driver issue, but I have no clue who makes the firewire for my early 08 MBP.
View 12 Replies View RelatedI have been using my MBP (2010, i7 17" model) with a 24" HP external HDMI LCD monitor. The connection is via the Apple's Mini DisplayPort to VGA Adapter. It was working perfectly the first day I tried. However, when I connected the external monitor to the MBP yesterday, I found that the LCD screen of the external monitor was blinking. It lasted for about 5 minutes and then the problem was gone by itself. I have just reconnected my MBP to the monitor again. The problem reappears. Anybody knows what is going on and how to fix it?
View 4 Replies View RelatedMacbook pro 2.16 C2D
iMac 2Ghz C2D
Both running 10.7.3
I am trying to connect from my macbook pro to iMac by using remote management with allow access for All Users but cannot get to connect from MBP to iMac. I can connect without problems from iMac to MBP. The macbook pro just sits trying to connect.
I check the log on the iMac and see the new entry appear during connect attempt of:
3/31/12 7:14:55.979 AM ScreensharingAgent: [CL_INVALID_DEVICE] : OpenCL Error : Failed to create context! Invalid device
Firewall turned off on both machines. I have created a new user on the Macbook to see if that could be the solution but still same occurrence.
Info:
Mac OS X (10.7.3)
I first installed Windows XP when I got my early 2008 Mac Pro. Boot Camp was probably beta back then, but I cant say my experience has changed much through Vista 32 bit or now Windows 7 64 bit. The way to dual boot, holding ALt during boot, has worked 1/10 times. Literally. The boot symbols are usually delayed, so I know when I choose the win partition, it gives me the "No bootable device" error. Two times have I had heavy OS X crashes after these boot-up "games". This last time I had to completely reinstall OS X (or upgrade to SL). How could this be, im not even booting into OS X when I am trying to boot into win.
I even have a separate hard drive for my Win partition. Not to mention the stream of driver issues you encounter when you finally manage to get inside Windows. I actually had my apple wireless and mouse working in Windows 7, but then I installed Boot Camp drivers of the DVD, and now theyre dead. I know. Its Windows, why would I miss it? Gaming or apps, regardless. Apple shouldnt include a program that functions so poorly, if they insist on higher standards elsewhere. It only reflects badly upon them. I consider myself a decent level mac user, venturing into command line troubleshooting if needed. But BootCamp remains a mystery to me.
app store not work my id apple-Your device or computer could not be verified. Contact support for assistance.
View 1 Replies View Relatedrecently i purchase a game named GTA san andreas from app store and it work perfectly everytime i open this game. but now, when i try to open it again. the computer wanted me to 'sign in to use this application on this computer'Â after i put the user name and password. failed. saying 'your device or computer could not be verified'Â
Info:
MacBook Pro
I am trying to connect a Macbook Pro to my printer wirelessly. I can connect it, but it uses my other Macbook Pro as a server (shared). I cannot connect this printer to the previously mentioned Macbook directly, as I get the message; "an error occurred while trying to add the selected device. Unable to communicate with the printer at this time."
On the printer selection menu, it says the printers are "bonjour printers". The shared printer via my other Macbook shows as shared, and the (same) printer directly off my network does not show shared, so I think it is a sharing problem.All the printer sharing is enabled, so I don't know why it shows that it is not shared.
The printer is a Canon MP530 which works fine. Everything connected fine before I used this printer. I am running Yosemite OS X 10.101 on both Macs, but I don't think that matters because I had the same problem before I upgraded. I have reset the printing system, repaired permissions, everything I can think of, and I still can't directly connect this printer over wi-fi.The driver even upgraded with the new OS X, so it's not the driver.
I can print, but only using my other Mac as a "server", and it has to be on. I shouldn't have to do that.The main question seems to be how do I set sharing permissions when they are already set to share?These are my choices on the "add printer" menu:
-PS-736C74-U1Â Â (Bonjour) (does not work)
-PS-736C74-U1 @ user's MacBook Pro (Bonjour shared) (works!)
Info:
MacBook Pro, OS X Yosemite (10.10.1)
Following error overcoming when I attempt to sign in: Your device or computer could not be verified. Contact support for assistance.
Info:
MacBook Air, Mac OS X (10.6.8)
When I sync my iPhone and iPod with iTunes, I get an error that says some obscure video can't be synced because the device doesn't support the file. I've included a picture, and have searched for the file, but can't find it! I would delete it if I could find it.
View 4 Replies View RelatedAfter installing Windows 7 on my mac, and installing the Apple drivers, I made an attempt to pair my Apple Wireless Keyboard with Windows. Well, Windows recognizes the device, but whenever I attempt to connect the two I get an error. The error states: Adding the device failed resulting in a unknown error. The reported error code is: 0x80004005. It then tells me to contact the device manufacturer. Did anyone else get this error?
View 8 Replies View RelatedMy Macbook Pro has been running into constant problems actually printing to any wireless device.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
Getting error could not connect to the server because the name or password is not correct. I am able to connect to another server on the network.
View 1 Replies View RelatedEversince I updated my iMac to 10.7.3 I get this message every 5 minutes. "There was a problem connecting to the server. That server was gone for almost 1 month now.I have checked Login items, launchdaemons, startup items pretty much gone to every website and I cannot get this error message go away.Â
Info:
iMac, Mac OS X (10.7.3)
out of nowhere, my iMac acts all up everytime I connect an USB drive, being a flashdrive or WD 1 TB drive.
Description:
When I plug the device in, the screen dims, and an error message onscreen asks me to reboot the iMac in several languages. If the device is still connected during reboot, the reboot loops (WITH the error screen showing first every loop).
Tried with 3 different devices,... everytime - the screen appears.
I recently bought a used apple ibook with the Mac OS 9.2 operating system on it. So far it seems to be working pretty well. It has an ethernet port, and I have AT&T Uverse at home. So I decided I wanted to get on the internet, so I plugged the ethernet cord into the port, and called AT&T to help me through the "internet setup assistant" So we went through the whole process, then I went onto Sherlock 2 and tried to access the internet, and the error message: "A network error has occurred. Check your internet connections and settings, then try again." which is exactly what it says when it is not hooked into the internet at all.
The guy at AT&T basically said that they were not familiar with the operating system that I am on, and transferred me to tech support that wanted to charge me $175 to help me get connected to the internet. It seemed to me that AT&T just didn't know what they were doing at all, and they could get a replica screen to mine so they didn't know what to tell me. The asked me if there was any way to test the internet connection and I didn't know b/c I am accustomed to windows vista. Does anyone know if I am supposed to do anything else or how to test the connection?
My Apple Id are working perfectly at iTunes store. When I try to log in at App Store it says: "Your device or computer could not be verified." I know there is an old Apple Id that's perhaps interferes with both my iPhone and App Store. I have tried to delete my old Apple ID to see if that would help, but it wont accept that I delete it.
Info:
Mac Pro, Mac OS X (10.7)
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).Â
Info:
Mac OS X (10.6.8)
I am trying to open this app but keep getting this message.
Info:
GarageBand (Mac) '11, Mac OS X (10.7.4)
If you watch the video in the link above you will see what happens to the window as I try to scroll up or down this has just started happening, on a new alu macbook does anybody have any ideas what i should be doing ?
View 6 Replies View RelatedI can't do much on my MacBook pro since I have this unexpected error occurred (error code -50), does anyone know what it is and how to fix it? Also when i try to open my iTunes it comes up with unknown error 13014.
View 3 Replies View RelatedEvery couple of days my computer (13 inch macbook pro) will disconnect from the Internet giving me a pop up saying 'another device on the network is using your computers IP address' it later says to change my IP address but I don't have one because I have an airport express router. What can I do about this?
View 1 Replies View RelatedTwo days ago, I installed AppleTV at my house. Not sure if this is the culprit, but my issues started after it was installed. My MBP will works fine on my home network, then randomly loses the Internet connection. Today, I was able to catch an error message that stated another device was using my computers IP address. So, I checked the ATV, and it was not. Then, I checked my iPhone...and it was! I reset my modem, reconnected my MBP...everything was fine. I then turned on the screen to my iPhone. It happened again. I noticed the iPhone was using the same IP address as my MBP. This time, I reset the modem, and made sure my iPhone was using WiFi when I did this. Now I'm up and running. All devices are set using DHCP. Would it be better to assign Static IP addresses? I've never done this, and don't want to screw anything up.
At my house, I have a lot of wireless devices:
3 laptops
3 iPhones
1 AppleTV
1 iTouch 4G
Plugged into the modem is my desktop computer and an AT&T Microcell. Would the addition of 1 more device (AppleTV) to my network start causing these problems?
I need some help bluetoothing music from my macbook to my blackberry, I've tried to do it several ways, and it either says on my macbook that "the device does not have the necessary services" or on both that the file transfer has failed.
View 8 Replies View Related