In one location I my macbook pro will not connect to network vis wifi unless I click on the desired network. My preference is set to automatically join, but it does not seem to be working. It is wep pw protected by have provided the password. That is not the problem. As soon as I click on my connection it comes right on. But it will not join automatically.
View 1 RepliesFor the past few months I've been using my mid-2007 MacBook (running Snow Leopard) with a Samsung external TV/monitor (with the MacBook's lid closed). I had no problems whatsoever in terms of internet connection to my D-Link DIR-655 router. Yesterday for the first time since creating this setup, I took the MacBook with me somewhere. When I returned the MacBook to my network (closed lid, plugged my monitor back in), I started having WiFi trouble. The WiFi was initially running very slowly and then not at all. The WiFi icon on the menu bar was showing regular strength, however.
The complicating factor here is that when my MacBook is on, all other computers on the network show getting WiFi signals but the connection isn't working for them either. When I turned off my MacBook and powered down/up the modem and router, other computers could connect successfully. (But when I turned my MacBook on, the computers lost connectivity to the internet. I've already played with the router's channels without success. I also made sure there weren't any unnecessary items in my Mac's DNS listing.
I'm looking for a solution to my WiFi internet connection. I haven't used my MacBook Pro laptop in the last week or so - which means there is no way I have done any changes to the network configuration. However when I now try to connect to the internet via a Hub - which is previously set up on the macbook and worked no problem - is now not working at all.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
All day, I am able to use the internet (via WiFi connection) at the library. But when I get home, I can't connect to my home WiFi connection. This was never an issue before. I have done all of the obvious things (resetting my router, clearing saved connections from my computer and joining a 'new' network, check and installed all updates, etc etc), but nothing seems to work. All the other devices in our house are connected to the WiFi just fine.
I run the diagnostic and I'm only green on WiFi and WiFi settings, with network settings and ISP fluctuating between yellow and red, and internet and server is always red. I have tried DHCP Lease renewel (which usually does the trick when I am getting an invalid IP address (169.xxx.x.x) until I get a valid one (192.xxx.x.x). But now sometimes I'm not even getting an IP at all! All I wanna do is unwind, check/reply to emails just surf the web to decompress after my long days.
(Running Lion 10.7.3; 2.66 GHz Intel Core 2 Duo; 4 GB ram (soon to be 8 )
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.2)
How do I get my Mac to select my Wi-fi network automatically? It used to do it on its own and now it goes into Network Diagnstic and I have to select.It used to work and now every time I go online I need to reconnect to my wi-fi.
Info:iMac, Mac OS X (10.7.3)
My old TiBook running Tiger did this without a hitch, but now that I'm on Snow Leopard it refuses to automatically connect to any computer-to-computer network.
My new laptop is an aluminum MacBook though I doubt that makes any difference as I know it's an OSX issue.
I've listed it as a preferred network in the AirPort preferences pane, but it doesn't seem to help.
There might be a terminal command to make it do this but I don't know it. Any suggestions?
I recently switched cable providers to Time Warner. They set up a Ubee cable modem and all devices (IPhone, IPad, AppleTV, etc) are all connecting to the wireless network except my IMac.  I tried renewing my DHCP lease, updating to OS X Maverick but every time I try and connect I get an error message that says "Connection Time Out".Â
Info:
iMac, OS X Mavericks (10.9.4)
I constantly loss connection to my wifi home connection, have to turn off an on the wifi on my macbook pro (10.7.4)
Info:MacBookPro, Mac OS X (10.7.4)
The internal modem in my PowerBook Pro (mid 2010) shows up as "not connected" in the Network pane of system preferences, but I can't figure out how to get it to connect. When I enter my phone number and click the connect button, I get an error message: "Network Connection The communication device selected for your connection does not exist. Verify your settings and try reconnecting."Â Say what? It says it exists in the System Preferences, shows it in the list on the left. How can it not exist?Â
Info:
MacBook Pro, Mac OS X (10.6.7)
MacBook. 2Ghz Intel Core Duo. OS Snow Leopard 10.6.6. I'm running a 2006 MacBook with Snow Leopard. A few months back it started dropping wifi connection. Airport would show no connection but would list my network along with others in my building. If I tried to connect with my WPA password it would just time out. At this time I was running Leopard.
Since then I've done a few things.Tried running the Netgear router with no encryption at all (same thing happens). Will lose connection and then time out trying to connect
I've tried the MacBook in a coffee shop with wifi access and at my parents (same NetGear router) and at my new apartment with a horrible Orange Livebox.
Taken the MacBook in to see the genius bar at Glasgow Apple store. Worked fine for them, but I explained it was intermittent but we could not force it to fail. I'm sure if it ran for an hour it would.
At present if I have the MacBook in the living room (where the Livebox router is situated) its fine and wont drop connection. If I walk some 5m to my bedroom it will work for approximately half and hour and then lose it. A few days ago I bought the Snow Leopard upgrade and installed it last night. MacBook runs a hell of a lot faster (yay!) but moving it away from the router and its dead as disco in half an hour.
So to clarify, the MacBook has been tested on 4 wifi networks/ locus with same issue. iPhone, Xbox 360 and PS3 all have no issues with dropping connection no matter where they are in the apartment.
Apartment is a new build and its walls are not made out of lead or kryptonite. Is this a hardware issue rather than software? When updating to Snow Leopard it was an update to the existing OS of Leopard not a clean install.
AIRPORT says the following in System Profiler.
Software Versions:
Menu Extra:6.2.1 (621.1)
configd plug-in:6.2.3 (623.2)
System Profiler:6.0 (600.9)
Network Preference:6.2.1 (621.1)
AirPort Utility:5.5.2 (552.11)
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
I have a Time Capsule wirelessly connected to my iMac. Since I've encountered some problems with backups because of intermittent wifi connection failures, I want to switch to a wired connection with an ethernet cable. I know I could fiddle with the wifi channels etc. but since the TC is just sitting next to my iMac anyway, I could profit from the higher bandwidth of a wired connection as well.Two questions:
1. What exactly do I have to do to make the switch? Are there any new settings I have to apply? Create a new network?
2. Will I still be able to use the wifi connection to get on the internet using my smartphone?
My Macbook Air is not connecting to wifi automatically even though my network is in the preferred network list. What shall I do?
View 6 Replies View RelatedI have an unsecured wifi network at home and need to easily share photos between computers. I have an iMac and a couple window based computer.Is ther an easy way instead of using a thumb drive?
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?Â
Info:
MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
why won't it automatically reconnect to the wifi when it wakes up
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
I have a problem with my Wi-Fi adapter. Irregularly my Wi-Fi connection stucks with still showing that a connection should be there but the internet is not working. Anyhow I manually deactivate the whole Wi-Fi adapter and I cannot switch it on again. Same problem exists when sometimes awake the Macbook and then the adapter is again deactivated. In both cases just a restart helps to solve the problem. After that everythink is working perfect again. what to check? I'm not really familiarly with the log files..
Info:
MacBook, Mac OS X (10.7.3)
How do I get my laptop to automatically connect to my wifi and not my neighbors?
View 1 Replies View Relatedi upgraded my Netgear DG834PN router to the latest firmware and changed the security to WPA2 encryption and ever since then my MBP doesn't snap back on to the WiFi automatically? when selected manually, it connects fine, just not automatically after sleep or being away from the house?
Info:
MBP 15.2, Mac OS X (10.7.2)
My Macbook Pro will not automatically connect to wi fi after restarting or sleeping.
Info:MacBookPro, Mac OS X (10.7.3)
My macbook pro isn't automatically connecting to wifi when I open it. I have to manually enter the password every time although I always click "remember password".
View 1 Replies View RelatedI have a 15 inch MacBook Pro core i5 and I would like the keyboard backlight to turn off automatically when I go into fullscreen mode when I watch a video. Is there any setting I can change, so I don't have to turn it off manually every time I watch a movie?
View 8 Replies View RelatedJust got a new MacBook Pro, and it is having wifi connectivity issues. Every time I fully shut down and restart the computer, it will not connect to my house's wifi. Rebooting the wifi solves the problem. This didn't happen w/ my old macbook, and no one else in the house is having wifi connection problems.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
Have connected with the wifi connection, and the bars are there. But it is not working in safari or anything else.
View 1 Replies View RelatedMy new MacBook Pro keeps loosing WiFi connection. Then when I try to login again it doesn't accept my login password. This is just one of several problem I am having with my new MacBook.
Info:
iMac, Mac OS X (10.7.3)
it says that i put the wireless name wrong, but im sure it is right, and im not far from the modem either.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
My MacBook Air keeps losing wi fi connection.
Info:
MacBook Air, Mac OS X (10.7.4)
I don't have WiFi internet at home and have an Ethernet cable plugged into my Mac Book Pro from my modem. From there I can use the Mac Book Pro as a WiFi transmitter and can surf the net on my iPad and iPhone using the Wifi from the Mac Book Pro.When I try and connect my XBOX One via Wifi to my Macbook Pro the Xbox one detects the Mac Book Pro and after I enter the password it mentions something about a MAC error.
View 1 Replies View RelatedI have recently had BT infinity installed and ever since, I lose internet connection on my Mac. When asked for the WPA password that I was supplied with, I put this in, but it says it is invalid. The only way to get a conncetion, is to press reset on the router. Then the same things happens the next day. We have tried changing the channel, frequency, etc. I thought it might be a setting on the mac...
Info:
MacBook Pro
Even other networks can not be shown after I restart my mac ?
View 1 Replies View Related