i have been using my MBP for a month and now after the update to 10.7.3 from 10.7.2...it has slowed down..it used to take 20 sec. to boot and now it takes about 35-45 sec. to boot up..is there any way i can bring it back to fast boot...
Info:
MacBook Pro, Mac OS X (10.7.3)
After updating to iTunes 10.1.1 the app did not start at first so I went to download it and installed it manually. iTunes works but my boot time went from ~2 wheel turns at the boot screen to ~16. Installed the new airport update, as well. I repaired the permissions and did a PRAM reset.
View 1 Replies View RelatedI had a system update a couple of days ago and since then I've noticed a slower boot time and my toolbar/applications hang for a while. It never used to do this before the update.
I'm on a Macbook Pro OS X 10.6.8.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
My MacBook Pro has considerably slowed down. There are many popup windows prompting me to click offering solution to improve the speed . Is it safe to use them? What should I do to restore the speed?
Info:
MacBook
Pro, Mac OS X (10.6.6)
My Macbook Pro 13' with 2.3 GHz Intel Core i5 processor with 500 gb in my Macintosh HD slowed down so much all of a sudden. I tried everything, resetting NVRAM and PRAM, tried to repair the disk and also tried to repair disk permissions, but to no avail. I even tried to reformat it and reinstalled Mac OSx 10.6.7 using the installation disc and also upgraded it to 10.6.8. It's working better after I reformatted it, but somehow its still slow. Its not laggy but in whatever I do, the stupid rainbow wheel/spinning beachball keeps coming up. Even the simplest of things take a long time to process, like opening safari. Also, the boot up is taking such a long time and it is not as smooth as before. So, because of this I'm starting to suspect that theres a problem with my processor?
Info:Mac Pro, Mac OS X (10.6.7)
my early 09 macbook came with 2g ram. i bought 2 sticks of samsung 2g to up my ram to 4, but system seems to run slower.
View 4 Replies View RelatedMy girlfriend just got a new MacBook Pro and I've been helping her transfer software and such to her computer from my MacBook Pro. When I was transferring games to a USB 2.0 flash drive (it was only 25% full and it is 2GB), it was freezing up when transferring multiple things. So, I stopped everything, and transferred everything one at a time. Well, it took between 5-10 minutes to transfer a 50MB game! When I plugged the drive into her computer it took all but 30 seconds to transfer. Is this difference accounted for by the .14 GHz processor bump from my 2.26 to her 2.4? Or should I be concerned about this slow speed? My computer is little over a year old now and I've already had the logic board replaced.
View 2 Replies View RelatedI've been having a problem with Gmail being incredibly slow on my MacBook Air. It's not my connection because it happens wherever I am, but I don't have the problem on my iPhone. It's been going on for a month or so, and I've tried disabling the labs but that hasn't helped. I'm nowhere near the memory capacity.
Info:
MacBook Air, Mac OS X (10.7.4)
My Mac has slowed down in the last few days. Any tip on how to clean-up the possible unnecessary files?
View 2 Replies View RelatedMachine Details:Macbook Pro 13inch model (2011)/Core i5 4gb RAM 250gb Standard harddriveÂ
The laptop was running like a dream and much better than I remembered my last mac (Macintosh LC) ever did. Ive had minor hickups this last year (a trackpad that went bust under warranty and a broken power supply) otherwise its been a wonderfull experience. The final hiccup that might be a cause, not sure hence I will mention it is that my battery is Conditon: Replace Now for about a month now. Â
The laptop, as always was left ON, on its own connected to the wifi home network, when I returned the computer was working very slow. Any load on the harddrive/CPU. The cursor starts lagging (jumping), any keypresses are registered with a 2-10second delay. Any vidoes that i would try to play would suffer freezes in framerates/jams but audio remained fine. First step i was afraid that i may have contracted one of the new trojans so i downloaded an antivirus program, scanned the drive, but came out clean. Second step was to format the drive and perform a fresh install of OSX but no luck. Being inexperienced in Apple products i assumed that my harddrive (used to PCs) was on the fritz and went out and bought a 160gb Western Digital Black series 2.5inch harddrive.
I placed in my installation OS 10.6 CD formatted the drive through the disk utility and performed a fresh install. Before doing any steps I went through the update cycle a couple of times till only the thunderbolt update remained (havent updated as I never used it). Sadly it hasnt solved the problems with cursor repsonse lag, video playback, and keyboard input lag under load. On this install I have performed:
Verify Disk Permissions Many were found so I performed Repair Disk Permissions
Verify Disk Came up with "Appears to be OK"
performed a Pram reset (CMD+option +P +R)Â
My main problem is that I live in europe nowadays (Poland to be precise) and cant go to a genius bar as they dont exist, and sadly the support is a tad behind the US standards and any minor repair will be at least a 4 week wait?
Info:
MacBook Pro, Mac OS X (10.6.8)
I replaced the hd in my 13" macbook pro with a western digital blue, 500gb. My concern is that the computer is not as snappy as I think it should be. I understand that I might have installed a hard drive with a motion sensor and that the motion sensor of the hd may conflict with the motion sensor of the mac itself and that might be the source of the slowdown? If so, which sensor should I deactivate, the mac's of the hard drive's?
View 1 Replies View RelatedRan the update from the Apple Update, which included iLife update and some other minor updates to the airport. Now the thing takes about 6 mnutes to boot up and once booted up, it will not respond in any meaningful way. Endless beachballs abound! I've tried zapping the PRAM, but no luck.
White Macbook 13", Leopard 10.5.6.
MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.
Info:MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
I updated with the latest Lion patch yesterday and since then Entourage has either hung or taken a very long time to update from our 2003 Exchange server (I have MS Office 2011 but as you're probably aware, there are issues integrating with a 2003 Exchange server). how this might be fixed, short of updating both our 2003 Windows Server to Windows Server 2008 x64 and Exchange to 2010 so I (the only Mac user out of 85 staff) can use Outlook 2011?
Info:
MacBook Pro, Mac OS X (10.7.3)
my Macbook Pro doesn't boot after updating the EFI, I just updated and restarted as it says in the description of the update and then it does not boot, making 4 short beeps and then 4 longer, I don't know what's happening. There was no problem during the update (no problem with electricity or similar)
Info:
MacBook Pro, Mac OS X (10.7.1)
MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you! Â
why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.Â
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.4), After Apple Software UPDATE, crash.
Just did Software Update from Apple and it crashed severely. Now it will not boot-up. I had the fading down screen with a message saying to hold down the on Button to reboot but it will not, it starts up with the same massage. It also comes up with some and more of the info below, whatever it means?
Panic CPU 0 <Panic>
Unable to find perform text scan:
Debugger called <Panic>
Can't perform text scan:
SD process name corresponding to correct thread
MAC OS Version: Not yet set.
I also updated a Mac Mini and iMac with no problems.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
My MacBook Pro will not reboot after a failed software update that was attempted on 2/8/2012. I am not sure if other users have experienced similar issues. It will not go past the white screen.  I have powered down the computer few times already to no avail.
Info:
MacBook
Pro, Mac OS X (10.7.2)
After software update cannot boot up (white screen with continuous busy indicator).Can I rebuild my Mac Book Air from a CD drive (I have OSX Lion on CD)?
Info:
MacBook Air, Mac OS X (10.0.x)
I have a strange boot issue having (tried) to install EFI 2.7 update. When I restart the laptop, it 'chimes', displays a grey screen, then chimes, displays a grey screen, forever. I hit the bower (off) button for 5 secs or thereabouts, and restart, same thing. I do this 4 times and finally it reboots. But the EFI update still appears as needing to be installed (software update tells me it is not installed). Update history shows however that it IS installed. I can go through this process any number of times. I now have Software Update history showing quite a few installs opf the EFI 2.7 update. If I just do a restart without installing, I also go through the same fail to restart / fail to start / ... / eventually restart sequence.
So it seems now that the laptop will only start after 4 failed restarts and finally it starts. After starting it all appears to be perfectly fine. Nothing strange in the console logs that I can see. The failed reboots don't seem to register in the console logs - I suspect that the failure to restart is pretty early on in the boot sequence, well before it tries to load any semblance of the OSX kernel. It is almost as if it is trying to boot from someplace other than the disk ... until eventually it gives up and tries the disk. (I have tried booting with and without network cable - no difference) I don't know enough about mac bootup sequences to know if there is some config/setting that is screwed up causing this odd behaviour.
Info:
MacBook (13-inch Mid 2010), Mac OS X (10.7.3)
I have late 2011 13"Macbook Pro with Mac OS X Lion 10.7.2
After i update it to 10.7.4 it restarted and shutdown , i open it again only apple logo appeared for 1 min then it shutdown .
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a 2 week old iMac 27", i7, 2tb Hard Drive, 16gb RM
In the second week the boot up times became very slow.
I would turn the machine on and get the chime within 5 seconds or so.
Then just a black/blank screen.
Eventually after about 10mins I would get a white screen then it would boot up normally.
Now the machine just doesn't get to the white screen. So I get the chime and then just darkness. It does sound like the machine is on (usual quiet imac whirring).
I've tried various key commands when I turn the machine on including pressing C with the install disk in the dvd drive and the alt, control, P, R pram reset.
I've also tried unplugging all the cables, leaving the machine for a minute and switching back on. I did manage to perform the PRAM reset once. I reset the machine and it booted fine.
But now when I switch it on just darkness.
I've called after sales and will try to get the machine replaced but in the meantime is there anything I could try that might make the machine work? I need to do a remix this weekend (deadline Monday) so really need to get it working.
Update 2012-002 on macbook pro. When rebooting,after 'successful' install, I now see a repeating cycle of Error = 19, unable to mount root. From my *nix perspective I fear the worst - that the boot sector (at a minimum) is hosed. I tried (running Lion 10.7.x) booting with the command key down - no joy. do not currently have my install disk (sadly, it's in storage, somewhere). I'm concerned about this. this is VERY unusual for an update. This is a relatively new drive (750GB drive installed about 8 months ago). At no point have I seen errors, and believe me, I look. Assuming the worst case is repartitioning? (ah for hte days of 'fdisk /mbr')
Info:
MacBook Pro (17-inch Core 2 Duo), Mac OS X (10.7.4)
I just purchased my Imac 2 days ago, I am new to Mac. I was trying to install Iwork09, and had the following programs on : Itunes (music playing), 2 USB flash memory, Safari. And the system just slowed down. There was no response, so what I did was to just turn the power off and restart. Everything ran smoothly again...
When I get stuck how should I turn off the MAC? I trying Force Quit, but it wouldn't work...Also I like running computer very simple with no clutter, how do I change the start up programs? Any maintanence I need to do so the system runs smoothly and fast?
I've never had these kind of problems with Leopard on my G5, neither on Tiger. Both having installed less than 4 GB of RAM. SL seems to have changed the RAM management quite a bit. I don't know if it's the video memory that is causing SL to slow down the whole system so much that it has to page out each and every newly opened Safari tab or PS document to HDD. Here is a screen shot of the RAM usage: In other words, the page-outs are taking place even despite the supposed FREE Inactive RAM...
View 24 Replies View RelatedMy iMac is running extremely slow (10-15 minutes to open up small simple applications). I ran Disk Utility and when I repaired permissions, I noticed a warning ( Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. ) I then attempted to run Disk Utility from the DVD, but that gave me a fail error. Is there any recourse other than wiping the disk and re-installing all software?
Info:
iMac, Mac OS X (10.6.8)
My MAC has slowed down how to speed it up?
View 2 Replies View RelatedEver since I updated to 10.6.1 I've had the following problems:
- Time Machine does not work at all with my Time Capsule. When it attempts to back up my data, Time Machine gets hung up with a status of "Making backup disk available..." and the icon in the menu bar just spins forever (the status appears in the menu bar icon's menu). I also cannot enter Time Machine; it gets hung trying to connect to the Time Capsule and I have to cancel it. Finder then takes up 100% CPU and I have to power down by holding in the power button (shutting down from the Apple menu doesn't work).
- I store my iTunes library in a folder called Music under the Data folder on the Time Capsule. When I open iTunes, it prompts me to choose my iTunes library. When I do, it starts to load the list of albums, then iTunes locks up and I must force quit it. This also causes my machine to not be able to shut down or restart from the Apple menu.
Oddly enough I can still access the Data folder from Finder with no issues. I just wanted to put this out there in case other people are having similar problems. It's pretty frustrating as all this worked fine before the 10.6.1 update.
Don't know what has happened, but my Internet connection seems to have slowed to a crawl. I originally thought it was Safari - but it's slow on Mail as well.
What could cause this?
I have booted on another partition and it's lickity split - but I have none of my settings on ot.
I want to use some of the great extensions showcased at safariextensions.tumblr.com but I'm afraid they'll slow down the browsing experience and start up times. Will it?
View 5 Replies View Related