MacBook Pro :: What Does Rtl Stand For In Wd Hard Drive Model Name
Aug 5, 2009
I am looking at the western digital 500 blue hard drive like on newegg, and i notice that there was two model names for the same drive. however i did not know what they represent exactly. my guess was that the wd5000bevtrtl meant retail and the the wd5000bevt was for system builders or bulk buyers. so is it that the only difference is that one comes in the package and the other does not. right. cause i saw one at besy buy and one is more expensive. now does this mean that the retail one is less likely to fail or do i run the same risk. i know this is a stupid question that may seem a little stupid but i just want to make sure.
View 1 Replies
ADVERTISEMENT
Oct 20, 2010
I want to buy a stand for my MacBook Pro 13.3". Anyone have a suggestion for a aluminum stand model?
View 3 Replies
View Related
Mar 24, 2012
I am moving my imac 24' from Europe to the states in my baggage. The stand mustbe removed to fit it in. Some models allow a business card or credit card to insert in the lever of the stand and the back of the imac housing where the stand is attached to. Thus oin pulling the stand levekl down with the acard inserted you will see a few srerws to unscrew to removing the stand. This is not with this imac 24' intel model number (A1225)
Info:
iMac, Mac OS X (10.6.8), Remove Stand on model (A1225)
View 1 Replies
View Related
Dec 27, 2010
I have a general question about a recently upgraded 2006 Mac Pro.
I recently upgraded my boot drive to a 1TB Western Digital 7200RPM sata drive.
I have a 2.66GHz Mac Pro late 2006. Running leopard. 4Gb Ram. Radeon 4870 HD (recently added). two other sata drives as backup. (200GB and 350GB, about 4 years old)
With the new drive I notice an odd clicking sound when ever I shut it down or send it into standbye.
Like the drive is just stopping instead of spinning down... I have heard that this can cause permanant drive failure... Is this an issue I need to be concerned with?
View 6 Replies
View Related
Dec 13, 2010
I just recently picked up a MacBook Pro, the $1199 model with a 250GB hard drive from Best Buy (Only reason - 24 months no interest with their store credit card). I would like to upgrade the hard drive, but need to know exactly what size screwdrivers to use. I was able to take out the 10 screws and unplug the SATA connector from the hard drive, but there are star screws that are on the actual hard drive I need to remove and put on the new one...Since I didn't have a star screwdriver, I had to put it back together. ONE screw will not go in all the way on the side, and its annoying me. Because of this, I'm scared to take it apart again without the proper tools and stripping a screw or hole. if
View 3 Replies
View Related
Jun 1, 2010
Does anyone know the exact hard drive model that Apple is using on the 500GB 7200 rpm configuration of the new 15" MacBook Pros?
View 5 Replies
View Related
Jun 3, 2010
Im thinking of upgrading my MBP hard drive up to around 500GB or 1TB (5400rpm and 8 cache). I know Mac's are funny when upgrading things so is there a limit to hard drive space? Also how much power does the current hard drive use as i dont want to loose much battery life. will it slow down my mac at all, i have heard about people getting problems when upgrading hard drive. Lastly will it void any of my warranty (i know the new hard drive wont be under warranty)
View 1 Replies
View Related
Feb 14, 2009
I am trying to find a hard drive compatible with my Nvidia MBA - make and model of the one in there Nvidia MBA?
View 9 Replies
View Related
Apr 18, 2010
Where is a good store online to purchase a Hard drive Model 1.8 128GB Sata Lif? I have been checking all local computer stores near my areas and no one can get a hold or them. Anyone know where i can find these online from a good website like newegg or etc?
View 3 Replies
View Related
Jun 22, 2012
I have a late 2010 Macbook Air, 13 inch, with the 126 gb hard drive. I was curious if there was a way to upgrade the hard drive at all. I know this isn't "officially" suported, but I've seen some compines online that claim to do it.
I haven't priced out the SSD drives or anything, so I'm not even sure if it's cost effective to upgrade.Â
Info:
MacBook Air, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 16, 2012
Wish to upgrade my PM G5 model 7.3. (June 2004). I have a 2 GHz dual core. Most 3,5" SATA HD today are SATA-300 and SATA-600 could either of these SATA HD be used in my G5, or is there some other specification on the SATA that I need to know before I purchase it? I am looking for two 1 TB HD to upgrade.
View 2 Replies
View Related
Mar 29, 2009
bad hard drive - 17" Model A1173? 106 views and not one response?
View 1 Replies
View Related
Aug 13, 2009
I want to upgrade the hard drive of my MBP 13'' 2.26 Ghz. What would be a better choise (performance, noise,...): Hitachi, Fijitsu or Scorpion?
View 3 Replies
View Related
Sep 2, 2009
this is my first post as im relatively new to using macs as a whole. Ive been a PC user my whole life but am currently raising funds so that i may buy a new MBP for myself. In doing so i have obtained an older Mac laptop from a family member which im going to try and sell for whatever money i can get. Ive researched the model as much as possible and have this info:
Powerbook G4 (12 in. DVI), 1.33 GHz, 256MB memory, Mac OS X 10.3.9
I want to wipe the Hard drive before i sell it however ive only found information on how to do so with an install disc which i do not have. Because it is relatively old, my family member doesnt know where it is either so using that disc is not really an option at this point. I wanted to find out what my next best option is or if i can use an install disc from any other mac laptop that might be more easily obtainable.
View 8 Replies
View Related
Jan 31, 2009
I have an old white Macbook, the 512 Ram, 60 GB Hard drive model, 2.0 Ghz. I'm currently upgrading my Ram to 2 Gb, can anyone recommend a relatively inexpensive model replacement for the stock drive with good speed. I'm currently shopping on Newegg and I have no idea what I am looking for.
View 14 Replies
View Related
Jul 29, 2009
I bought HIS Radeon HD4870 512MB DDR5 for my Mac Pro 2006 1.1. The first problem I've found it that card will not fit to slot 1, because of too long screws. So I installed it in slot 2, leaving 7300GT in slot 1. The next problem was how to get rid of these power cables - I've tried the more elegant way taking that molex adapter under HDD trays, but cables where too short So I installed them on the right of Superdrive's tray. Now on Mac OS X I got kernel panic (probably the injector thing). On Windows Vista card is detected, but automatically disabled (probably not enough power or just PCI-EX 1x slot is not compatible). Here are photos from the operation. I'll try to install Accelero S1 rev. 2 with Noctua 120 mm fan and will see how things go I've also ordered two special Apple PCI-EX power connectors from Austria.
View 24 Replies
View Related
Oct 31, 2010
I am trying to decide whether to get the 2010 model or the cheaper 2009 model. These are the differences that I've found so far for the base model. For arguments sake, let's say they both have 4gb ram (most people selling them have upgraded to 4gb)
2010: 2.4ghz, longer battery, nvidia 320m
2009: 2.26ghz, (slightly) shorter battery, nvidia 9400m
Having a slightly slower cpu, less battery life (about 7 hours rather than 9) and a slightly weaker gpu don't bother me so much, as I will be mostly using the macbook pro for internet surfing and writing word documents
My question is, are there any other differences? (that would make me go for the 2010 rather than the 2009 model) - maybe differences in the display? shape? something else?
View 9 Replies
View Related
Nov 2, 2010
i am contemplating buying a late 2008 mbp air i found for $800 on CL. it has the 1.86 ghz 2gig ram and an 128 gb ssd. would that be comparable to the new 2010 version? i know the new one will edge it out, but by how much? i do a lot of art using flash, illustrator, and ps but just want to use this machine occasionally when i travel, ill have another machine for the heavy lifting if needed be. is that a good deal? or should i just wait and get the 2010 version which is double that?
View 5 Replies
View Related
Aug 28, 2009
PC World (in the UK) are selling the old 2.66GHz 15" model for �1,149 (rather than �1,499 for the new model).
The differences between it and the new model are summarised below (as I understand them)
Battery: Old: 5hr, New:7hr non-swappable
Display: New: Better colour gamut (apparently?)
Processor: Old: 6MB cache, New: 3MB cache
Card bay: Old: Express34, New: SD
Of the above only the battery life is of any relevance to me (unless the display quality is really that different?). The SD card would be marginally more useful than the Express card.
View 13 Replies
View Related
Sep 9, 2009
I've been contemplating recently (as most mac users do) about switching my 2 year old MBP (2.2 ghz, 2gb ram, 8600m) to the new MBP (15" 2.8, newer gfx, touchpad and a few minor details).
I've been eying the ebay prices for some time and my particular model (with charger, snow leopard, original accessories but w/o box) is valued at about 700gbp. Perhaps people might disagree with me here - how much is it really worth ?
My main point / question is really at what point should I ditch the existing MBP in favor of the new mbp - does it really offer me that much of a benefit at this time to upgrade? I'd sure like the new graphics card in there (is it really that much better?) but I'm not sure there's a significant enough difference there.
On the other hand if I wait much longer the MBP will become pretty devalued and not get me much back for the new and improved MBP - maybe apple's going to improve them soon anyway?
View 2 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Aug 4, 2010
Are the hard drives variable in each model? Any chance that people who have received theirs could post which model and hard drive it came with, to get an idea of what each is shipping with?
View 2 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Sep 1, 2010
I am about to buy a computer and just been doing some research. When I went to best buy and ran a geekbench score on the imac it was like around 5800.
A seller on ebay who is selling a Mac Pro 3.0 ghz just ran the score and posted the results of 6214
[URL]
Based off of this score alone wouldn't it mean that the 2007 Mac Pro is faster than the newer 2010 imac
View 4 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
Jan 14, 2009
is the model MB321LLA for Airport Express the newest model which is current selling at Apple?
because I saw some sellers selling this model and I wanna get it but when I check Apple.com, I don't see the the newest model number they are currently selling
View 8 Replies
View Related
Sep 11, 2009
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Oct 2, 2009
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies
View Related
